Journal of Electrical Engineering and Technology

The Korean Institute of Electrical Engineers (대한전기학회)
권호 표지
DOI QR코드

DOI QR Code

Optimal Design of a Two-phase BLDC Motor Considering Efficiency and Torque Ripple

  • Kim, Jae-Beom (Dept. of CTO division, LG Electronics) ;
  • You, Yong-Min (Dept. of Energy Component division, LG Electronics) ;
  • Kang, Sun-Il (Dept. of Actuator development, Hyundai Kefico) ;
  • Kwon, Byung-Il (Dept. of Electronic Systems Engineering, Hanyang University)
  • Received : 2012.06.06
  • Accepted : 2013.05.07
  • Published : 2013.09.01
Download PDF
⟨ Previous Next ⟩

Abstract

This paper introduces novel a two-phase permanent magnet BLDC (PMBLDC) motor with both an asymmetric tooth and an auxiliary tooth in order to improve the dead point, efficiency and torque ripple. To calculate the merits of introducing each of the asymmetric tooth and the auxiliary tooth, characteristic analysis is performed respectively using finite element method (FEM). To maximize performance, we propose a novel model which combines the asymmetric tooth and the auxiliary tooth. To maximize the efficiency of the novel model, an optimal design is processed using the Kriging method and a genetic algorithm. Finally, an experiment is used to confirm the initial and optimal design results.

Keywords

References

  1. T. J. E Miller, Design of Brushless Permanent- Magnet Motor, Clarendon press, Oxford, 1994.
  2. P. Campbell, Permanent Magnet Materials and their Application, Cambridge Press, 1994.
  3. Takashi Kenjo, Shigenobu Nagamori, "Permanent Magnet and Brushless DC motors", Sogo Electronics Publishing Company, 1984.
  4. C. B. Rajanathan, H. Acikoz, R. Egin, "Transient Characteristics of The Single phase Permanent magnet Synchronous motor", IEEE Trans. Magnet., Vol. 35, No. 5, pp. 3589-3591, Sep. 1999. https://doi.org/10.1109/20.800599
  5. S. Bentouati, Z. Q. Zhu, D. Howe, "Influence of Design Parameters on the Starting Torque of a Single-Phase PM Brushless Motor", IEEE Trans. Magnet., Vol. 36, No. 5, pp. 3723-3726, Sep. 2000.
  6. A. Hamler and B. Hribernik, "Impact of Shape of Stator pole of One phase Brushless motor On Cogging Torque", IEEE Trans. Magnet., Vol. 32, No. 5, pp. 1545-1548, 1996. https://doi.org/10.1109/20.497545
  7. Y. Chen, S. Chen, Z. Q. Zhu, D. Howe, Y. Y. Ye, "Starting Torque of Single-Phase Flux-Switching Permanent Magnet Motors", IEEE Transactions On Magnetics, Vol. 42, No. 10, pp. 3416-3418, October 2006. https://doi.org/10.1109/TMAG.2006.879437
  8. C. Chiu, Y. Chen, W. Jhang, "Properties of Cogging torque, Starting torque, and Electrical Circuits for the Single-Phase Brushless DC Motor", IEEE Trans. Magnet., Vol. 44, No. 10, Oct. 2008.
  9. B. I. Kwon, B. Y. Yang, S. C. Park, and Y. S. Jin, "Novel topologyof unequal air gap in a single-phase brushless dc motor," IEEE Trans. Magnet., Vol. 37, No. 5, pp. 3723-3726, Sep. 2001. https://doi.org/10.1109/20.952699
  10. M. Fazil, K. R. rajagopal, "A Novel Air-Gap Profile of Single-Phase Permanent-Magnet Brushless DC Motor for Starting Torque Improvement and Cogging Torque Reduction," IEEE Trans. Magnet., Vol. 46, No. 11, Nov. 2010.
  11. J. N. Bae, S. Y. Oh, S. J. Kim, J. Lee, "Optimal Design of a Magnetization Fixture for Cogging Torque Reduction of ODD Spindle Motor", Telecommunications Energy Conference, pp. 1-3, Oct. 2009.
  12. Chun-Lung Chiu, Yie-Tone Chen, You-Len Liang, and Ruey-Hsun Liang, "Optimal Driving Efficiency Design for the Single-Phase Brushless DC Fan Motor," IEEE Trans. Magnet., Vol. 46, No. 4, pp. 1123-1130, April 2010. https://doi.org/10.1109/TMAG.2009.2035051
  13. T. W. Simpson, T. M. Mauery, J. Korte, F. Mistree., "Kriging Models for Global Approximation in Simulation-Based Multidisciplinary Design Optimization", AIAA, Vol. 39, No. 12, pp. 2233-2241, 2001. https://doi.org/10.2514/2.1234
  14. Pan-Seok Shin, Sun-Hyun Woo, Yanli Zhang, and Chan-Seop Koh, "An Application of Latin Hypercube Sampling Strategy for Cogging Torque Reduction of Large-Scale Permanent Magnet Motor," IEEE Transactions on Magnetics, Vol. 44, No. 11, pp. 4421-4424, November 2008. https://doi.org/10.1109/TMAG.2008.2002479
  15. K. R. Davey, "Latin hypercube sampling and pattern search in magnetic field optimization problems," IEEE Trans., Magn., Vol. 44, pp. 947-977, June 2007.