References
-
Masaoka I., Yada M., Sasaki R., Brittle fracture initiation characteristics of weld joint for 80kg/
$mm^2$ high strength thick plate steel(Report3) -Effect of residual stress and repair welding on brittle fracture initiation from surface notch in fusion line of welded joints - , Journal of the Japan Welding Society (2010), 44(11)-914-9230 - Park J.U "Mechanism and Effects of Welding Residual Stress -Mechanism of Welding Residual Stress" Journal of the KWS, 22-2 (2004), 1-2 (in Korean).
- Kim J.S, Park J.S and Jin T,E, "Review on the International Joint Researches for Evaluation of Welding Residual Stresses" Journal of the KWS, 23-6 (2005), 8-17 (in Korean)
- Jin H.K, Lee D.J and Shin S.B "Effect of Distance and Restraint Degree between Fillet and Butt Weldment on Residual Stress Redistribution at each Weldment" Journal of the KWJS, 28-3 (2010), 59-64(in Korean) https://doi.org/10.5781/KWJS.2010.28.3.059
- Ueda Y., Fukuda K., Nakacho K. and Endo S., A new measuring method of residual stresses with the aid of finite element method and reliability of estimated values, Trans. JWRI (1975), 52(4)-19-27
- Murakawa H. and Luo Y. and Ueda Y., Prediction of welding deformation and residual stress by elastic FEM based on inherent strain (first report) mechanism of inherent strain production, Journal of the Society of Naval Architects of Japan (1996), 180-739-751
- Park J.U. and Lee S.U., Effects of residual stress of thick plate due to welding process, abstracts of the 2009 spring annual meeting of KWJS (2009),105
- ASTM E 837-01: Standard test method for determining residual stresses by the hole-drilling strain gauge method, (2001)
- Schajer G.S., Measurement of non-uniform residual stresses using the hole-drilling method, part I -stress calculation procedures-, Journal of Engineering Materials and Technology(1988), 110-338-343 https://doi.org/10.1115/1.3226059
- Masubuchi K., Analysis of welded structures, Pergamon press(1980)
- Birkholz M., Genzel C., Jung T., X-ray diffraction study on residual stress and preferred orientation in thin titanium films subjected to a high ion f lux during deposition, Journal of Applied Physics (2004), 96-7202-12 https://doi.org/10.1063/1.1814413
- Ueda Y., Takahashi E., Fukuda K., Sakamoto K., Nakacho K., Multipass welding stresses in very thick plates and their reduction from stress relief annealing, Trans JWRI (1976), 5(2)-179-189
- Wang R., Zhang J., Serizawa H., Murakawa H., Study of welding inherent deformations in thin plates based on finite element analysis using interactive substructure method. Material & Design (2009), 30-3474-3481 https://doi.org/10.1016/j.matdes.2009.03.015
- Ueda Y., Murakawa H., Ma N., Welding deformation and residual stress prevention, Butterworth-Heinemann, ISBN (2012), 978-0-12-394804-5
- Allen A.J., Hutchings M.T., Windsor C.G., Andreani C., Neutron diffraction methods for the study of residual stress fields, Advances in Physics (1985), 34(4)-445-473 https://doi.org/10.1080/00018738500101791
- Okido S., Hayashi M., Tanaka K., Akinawa Y., Minakawa N., Mori Y., Measurement of residual stress in textured Al alloy by neutron diffraction method, 7th international conference on nuclear engineering (ICONE), Tokyo, Japan, (1999),19-23
- Woo W., An G.B., Kingston E.J., De Wald A.T., Smith D.J., Hill M.R., Through-thickness distributions of residual stresses in two extreme heat-input thick welds: A neutron diffraction, contour method and deep hole drilling study, Acta Materialia (2013), 61-3564-3574 https://doi.org/10.1016/j.actamat.2013.02.034
- Smith, D.J., Bouchard, P.J. George, D., Measurement and prediction of residual stresses in thick-section steel welds, Joural of Strain Analysis for Engineering Design (2000), 35(4)-287-305 https://doi.org/10.1243/0309324001514422
- Mahmoudi A.H., Hossain S., Pavier M. J., Truman C.E.,Smith D. J., A new procedure to measure near yield residual stresses using the deep hole drilling technique, Experimental Mechanics(2009), 49(4)- 595-604 https://doi.org/10.1007/s11340-008-9164-y
- Kingston E.J., Advances in the deep hole drilling technique for residual stress measurement, PhD thesis, University of Bristol (2003)
- M B Prime, 2001, "Cross-sectional mapping of residual stresses by measuring the surface contour after a cut", Journal of Engineering Materials and Technology (2001), Volume 123-pp.162-168 https://doi.org/10.1115/1.1345526