Restorative Dentistry and Endodontics

  • 제38권3호
  • /
  • Pages.105-112
  • /
  • 2013
  • /
  • 2234-7658(pISSN)
  • /
  • 2234-7666(eISSN)
대한치과보존학회 (The Korean Academy of Conservative Dentistry)
권호 표지
DOI QR코드

DOI QR Code

Thermal irritation of teeth during dental treatment procedures

  • Kwon, Su-Jung (Department of Conservative Dentistry, Seoul National University School of Dentistry and Dental Research Institute) ;
  • Park, Yoon-Jung (Department of Nutritional Science and Food Management, Ewha Womans University Health Science College) ;
  • Jun, Sang-Ho (Department of Oral and Maxillofacial Surgery, Korea University Anam Hospital) ;
  • Ahn, Jin-Soo (Department of Dental Biomaterials Science, Seoul National University School of Dentistry and Dental Research Institute) ;
  • Lee, In-Bog (Department of Conservative Dentistry, Seoul National University School of Dentistry and Dental Research Institute) ;
  • Cho, Byeong-Hoon (Department of Conservative Dentistry, Seoul National University School of Dentistry and Dental Research Institute) ;
  • Son, Ho-Hyun (Department of Conservative Dentistry, Seoul National University School of Dentistry and Dental Research Institute) ;
  • Seo, Deog-Gyu (Department of Conservative Dentistry, Seoul National University School of Dentistry and Dental Research Institute)
  • 투고 : 2013.03.18
  • 심사 : 2013.05.14
  • 발행 : 2013.08.30
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

While it is reasonably well known that certain dental procedures increase the temperature of the tooth's surface, of greater interest is their potential damaging effect on the pulp and tooth-supporting tissues. Previous studies have investigated the responses of the pulp, periodontal ligament, and alveolar bone to thermal irritation and the temperature at which thermal damage is initiated. There are also many in vitro studies that have measured the temperature increase of the pulp and tooth-supporting tissues during restorative and endodontic procedures. This review article provides an overview of studies measuring temperature increases in tooth structures during several restorative and endodontic procedures, and proposes clinical guidelines for reducing potential thermal hazards to the pulp and supporting tissues.

키워드

참고문헌

  1. Zach L, Cohen G. Pulp response to externally applied heat. Oral Surg Oral Med Oral Pathol 1965;19:515-530. https://doi.org/10.1016/0030-4220(65)90015-0
  2. Eriksson AR, Albrektsson T. Temperature threshold levels for heat-induced bone tissue injury: a vital-microscopic study in the rabbit. J Prosthet Dent 1983;50:101-107. https://doi.org/10.1016/0022-3913(83)90174-9
  3. Firoozmand L, Faria R, Araujo MA, di Nicolo R, Huthala MF. Temperature rise in cavities prepared by high and low torque handpieces and Er:YAG laser. Br Dent J 2008;205:E1;discussion 28-29. https://doi.org/10.1038/sj.bdj.2008.491
  4. Srimaneepong V, Palamara JE, Wilson PR. Pulpal space pressure and temperature changes from Nd:YAG laser irradiation of dentin. J Dent 2002;30:291-296. https://doi.org/10.1016/S0300-5712(02)00023-4
  5. Al-Qudah AA, Mitchell CA, Biagioni PA, Hussey DL. Effect of composite shade, increment thickness and curing light on temperature rise during photocuring. J Dent 2007;35:238-245. https://doi.org/10.1016/j.jdent.2006.07.012
  6. Hannig M, Bott B. In vitro pulp chamber temperature rise during composite resin polymerization with various light-curing sources. Dent Mater 1999;15:275-281. https://doi.org/10.1016/S0109-5641(99)00047-0
  7. Jakubinek MB, O'Neill C, Felix C, Price RB, White MA. Temperature excursions at the pulp-dentin junction during the curing of light-activated dental restorations. Dent Mater 2008;24:1468-1476. https://doi.org/10.1016/j.dental.2008.03.012
  8. Castelnuovo J, Tjan AH. Temperature rise in pulpal chamber during fabrication of provisional resinous crowns. J Prosthet Dent 1997;78:441-446. https://doi.org/10.1016/S0022-3913(97)70057-X
  9. Chiodera G, Gastaldi G, Millar BJ. Temperature change in pulp cavity in vitro during the polymerization of provisional resins. Dent Mater 2009;25:321-325. https://doi.org/10.1016/j.dental.2008.08.006
  10. Er O, Yaman SD, Hasan M. Finite element analysis of the effects of thermal obturation in maxillary canine teeth. Oral Surg Oral Med Oral Pathol Oral Radiol Endod 2007;104:277-286. https://doi.org/10.1016/j.tripleo.2007.02.011
  11. Lipski M. In vitro infrared thermographic assessment of root surface temperatures generated by hightemperature thermoplasticized injectable gutta-percha obturation technique. J Endod 2006;32:438-441. https://doi.org/10.1016/j.joen.2005.10.047
  12. Zhou X, Chen Y, Wei X, Liu L, Zhang F, Shi Y, Wu W. Heat transfers to periodontal tissues and gutta-percha during thermoplasticized root canal obturation in a finite element analysis model. Oral Surg Oral Med Oral Pathol Oral Radiol Endod 2010;110:257-263. https://doi.org/10.1016/j.tripleo.2010.04.005
  13. Dominici JT, Clark S, Scheetz J, Eleazer PD. Analysis of heat generation using ultrasonic vibration for post removal. J Endod 2005;31:301-303. https://doi.org/10.1097/01.don.0000140573.72922.c9
  14. Huttula AS, Tordik PA, Imamura G, Eichmiller FC, McClanahan SB. The effect of ultrasonic post instrumentation on root surface temperature. J Endod 2006;32:1085-1087. https://doi.org/10.1016/j.joen.2006.05.005
  15. Satterthwaite JD, Stokes AN, Frankel NT. Potential for temperature change during application of ultrasonic vibration to intra-radicular posts. Eur J Prosthodont Restor Dent 2003;11:51-56.
  16. Matalon S, Slutzky H, Wassersprung N, Goldberg- Slutzky I, Ben-Amar A. Temperature rises beneath resin composite restorations during curing. Am J Dent 2010; 23:223-226.
  17. Baldissara P, Catapano S, Scotti R. Clinical and histological evaluation of thermal injury thresholds in human teeth: a preliminary study. J Oral Rehabil 1997;24:791-801. https://doi.org/10.1046/j.1365-2842.1997.00566.x
  18. Line SE, Polson AM, Zander HA. Relationship between periodontal injury, selective cell repopulation and ankylosis. J Periodontol 1974;45:725-730. https://doi.org/10.1902/jop.1974.45.10.725
  19. Matthews LS, Hirsch C. Temperatures measured in human cortical bone when drilling. J Bone Joint Surg Am 1972;54:297-308. https://doi.org/10.2106/00004623-197254020-00008
  20. Sauk JJ, Norris K, Foster R, Moehring J, Somerman MJ. Expression of heat stress proteins by human periodontal ligament cells. J Oral Pathol 1988;17:496-499. https://doi.org/10.1111/j.1600-0714.1988.tb01323.x
  21. Atrizadeh F, Kennedy J, Zander H. Ankylosis of teeth following thermal injury. J Periodontal Res 1971;6:159-167 https://doi.org/10.1111/j.1600-0765.1971.tb00604.x
  22. Watson TF, Flanagan D, Stone DG. High and low torque handpieces: cutting dynamics, enamel cracking and tooth temperature. Br Dent J 2000;188:680-686.
  23. Attrill DC, Davies RM, King TA, Dickinson MR, Blinkhorn AS. Thermal effects of the Er:YAG laser on a simulated dental pulp: a quantitative evaluation of the effects of a water spray. J Dent 2004;32:35-40.
  24. Martins GR, Cavalcanti BN, Rode SM. Increases in intrapulpal temperature during polymerization of composite resin. J Prosthet Dent 2006;96:328-331. https://doi.org/10.1016/j.prosdent.2006.09.008
  25. Yazici AR, Muftu A, Kugel G, Perry RD. Comparison of temperature changes in the pulp chamber induced by various light curing units, in vitro. Oper Dent 2006;31: 261-265. https://doi.org/10.2341/05-26
  26. Saunders WP, Saunders EM. Prevalence of periradicular periodontitis associated with crowned teeth in an adult Scottish subpopulation. Br Dent J 1998;185:137-140. https://doi.org/10.1038/sj.bdj.4809750
  27. Moulding MB, Loney RW. The effect of cooling techniques on intrapulpal temperature during direct fabrication of provisional restorations. Int J Prosthodont 1991;4:332-336.
  28. Gutmann JL, Rakusin H, Powe R, Bowles WH. Evaluation of heat transfer during root canal obturation with thermoplasticized gutta-percha. Part II. In vivo response to heat levels generated. J Endod 1987;13:441-448. https://doi.org/10.1016/S0099-2399(87)80062-6
  29. Molyvdas I, Zervas P, Lambrianidis T, Veis A. Periodontal tissue reactions following root canal obturation with an injection-thermoplasticized gutta-percha technique. Endod Dent Traumatol 1989;5:32-37. https://doi.org/10.1111/j.1600-9657.1989.tb00334.x
  30. Walmsley AD. Ultrasound and root canal treatment: the need for scientific evaluation. Int Endod J 1987;20:105-111. https://doi.org/10.1111/j.1365-2591.1987.tb00600.x
  31. Trenter SC, Walmsley AD. Ultrasonic dental scaler: associated hazards. J Clin Periodontol 2003;30:95-101. https://doi.org/10.1034/j.1600-051X.2003.00276.x
  32. Mollica FB, Camargo FP, Zamboni SC, Pereira SM, Teixeira SC, Nogueira L Jr. Pulpal temperature increase with high-speed handpiece, Er:YAG laser and ultrasound tips. J Appl Oral Sci 2008;16:209-213. https://doi.org/10.1590/S1678-77572008000300009
  33. Ahmad M. Measurements of temperature generated by ultrasonic file in vitro. Endod Dent Traumatol 1990;6: 230-231. https://doi.org/10.1111/j.1600-9657.1990.tb00424.x
  34. Gluskin AH, Ruddle CJ, Zinman EJ. Thermal injury through intraradicular heat transfer using ultrasonic devices: precautions and practical preventive strategies. J Am Dent Assoc 2005;136:1286-1293. https://doi.org/10.14219/jada.archive.2005.0346
  35. Walters JD, Rawal SY. Severe periodontal damage by an ultrasonic endodontic device: a case report. Dent Traumatol 2007;23:123-127. https://doi.org/10.1111/j.1600-9657.2005.00384.x
  36. Lipski M, Debicki M, Droz'dzik A. Effect of different water flows on root surface temperature during ultrasonic removal of posts. Oral Surg Oral Med Oral Pathol Oral Radiol Endod 2010;110:395-400. https://doi.org/10.1016/j.tripleo.2010.04.022
  37. Budd JC, Gekelman D, White JM. Temperature rise of the post and on the root surface during ultrasonic post removal. Int Endod J 2005;38:705-711. https://doi.org/10.1111/j.1365-2591.2005.01002.x
  38. Madarati AA, Qualtrough AJ, Watts DC. Factors affecting temperature rise on the external root surface during ultrasonic retrieval of intracanal separated files. J Endod 2008;34:1089-1092. https://doi.org/10.1016/j.joen.2008.05.018

피인용 문헌

  1. Light curing in dentistry and clinical implications: a literature review vol.31, pp.suppl 1, 2017, https://doi.org/10.1590/1807-3107bor-2017.vol31.0061
  2. Thermographie in der Pulpa während der Entfernung von Adhäsivresten vol.78, pp.4, 2017, https://doi.org/10.1007/s00056-017-0089-x
  3. Influence of the material for preformed moulds on the polymerization temperature of resin materials for temporary FPDs vol.9, pp.4, 2017, https://doi.org/10.4047/jap.2017.9.4.294
  4. Temperature changes under demineralized dentin during polymerization of three resin-based restorative materials using QTH and LED units vol.39, pp.3, 2014, https://doi.org/10.5395/rde.2014.39.3.155
  5. Effect of Irradiance and Exposure Duration on Temperature and Degree of Conversion of Dual-Cure Resin Cement for Ceramic Restorations vol.43, pp.6, 2018, https://doi.org/10.2341/17-283-L
  6. Tooth sectioning for coronectomy: how to perform? pp.1436-3771, 2018, https://doi.org/10.1007/s00784-018-2466-2
  7. Polymerisation Shrinkage Profiling of Dental Composites using Optical Fibre Sensing and their Correlation with Degree of Conversion and Curing Rate vol.9, pp.1, 2019, https://doi.org/10.1038/s41598-019-40162-z
  8. Pulp Temperature Rise Induced by Light-Emitting Diode Light-Curing Units Using an Ex Vivo Model vol.12, pp.3, 2019, https://doi.org/10.3390/ma12030411
  9. Comparison of Exothermic Release during the Polymerization of Four Materials used to fabricate Provisional Restorations vol.4, pp.1, 2014, https://doi.org/10.5005/jp-journals-10019-1097
  10. Comparison of Exothermic Release during the Polymerization of Four Materials used to fabricate Provisional Restorations vol.4, pp.1, 2014, https://doi.org/10.5005/jp-journals-10019-1097
  11. Real-Time Analysis of Temperature Changes in Composite Increments and Pulp Chamber during Photopolymerization vol.2015, pp.None, 2013, https://doi.org/10.1155/2015/923808
  12. Protective Effects of Base Cements against Intrapulpal Temperature Rise during Curing of Composite Resins: An In Vitro Study by Pulpal Blood Microcirculation Model vol.7, pp.2, 2018, https://doi.org/10.5005/jp-journals-10029-1180
  13. In Vitro Analysis of Techniques that Alter the Surface Hardness of a Glass Ionomer Restorative Material vol.20, pp.12, 2019, https://doi.org/10.5005/jp-journals-10024-2702
  14. Controlling In Vivo, Human Pulp Temperature Rise Caused by LED Curing Light Exposure vol.44, pp.3, 2013, https://doi.org/10.2341/17-364-c
  15. A Study on Temperature Changes during Bone Scaling and Cutting of Dental Ultrasonic Scaling/Surgery System vol.19, pp.2, 2013, https://doi.org/10.14775/ksmpe.2020.19.02.001
  16. Prosthodontic Applications of Polymethyl Methacrylate (PMMA): An Update vol.12, pp.10, 2013, https://doi.org/10.3390/polym12102299
  17. Three Dimensional mapping of the root apex: distances between apexes and anatomical structures and external cortical plates vol.35, pp.None, 2013, https://doi.org/10.1590/1807-3107bor-2021.vol35.0022
  18. Comparative Evaluation of Thermal Alterations on External Root Surface during Mechanical Instrumentation and Thermoplasticized Gutta-percha Obturation: An Ex Vivo Study vol.12, pp.5, 2013, https://doi.org/10.5005/jp-journals-10015-1852
  19. Thermal Behavior of Teeth During Restoration Procedure With Composite: Experimental Tests and Numerical Simulation vol.143, pp.2, 2013, https://doi.org/10.1115/1.4048922
  20. Degree of conversion and in vitro temperature rise of pulp chamber during polymerization of flowable and sculptable conventional, bulk-fill and short-fibre reinforced resin composites vol.37, pp.6, 2013, https://doi.org/10.1016/j.dental.2021.02.013
  21. Shot peening increases resistance to cyclic fatigue fracture of endodontic files vol.11, pp.1, 2013, https://doi.org/10.1038/s41598-021-92382-x