DOI QR코드

DOI QR Code

헬름홀쯔 공명기에서 외부로의 누출

External Leakage on Helmholtz Resonators

  • Lee, Iljae (Department of Mechanical Engineering, Chonbuk National University)
  • 투고 : 2013.05.27
  • 심사 : 2013.07.11
  • 발행 : 2013.08.20

초록

The effect of external leakage on the acoustic performance of Helmholtz resonators is experimentally and numerically investigated. The transmission loss of the Helmholtz resonator with a circular perforated hole is measured by using an impedance tube setup. The experimental results are then compared with one-dimensional analytical and three-dimensional numerical results. As the size of the hole increases, the peak of the transmission loss shifts to higher frequency, especially for the holes on the cavity. While the transmission loss is almost independent of the location of the hole on the cavity, the impact of the hole location on the neck on the transmission loss is not negligible. The results show that one-dimensional analytical method can predict the overall trends, whereas three-dimensional numerical method is necessary for more accurate predictions.

키워드

참고문헌

  1. Ingard, U., 1953, On the Theory and Design of Acoustic Resonators, Journal of Acoustical Society of America, Vol. 25, No. 6, pp. 1037-1061. https://doi.org/10.1121/1.1907235
  2. Chanaud, R. C., 1994, Effects of Geometry on the Resonance Frequency of Helmholtz Resonators, Journal of Sound and Vibration, Vol. 178, No. 3, pp. 337-348. https://doi.org/10.1006/jsvi.1994.1490
  3. Haa, S. T. and Kim, Y.-H., 1994, The Limitation and Applicability of Helmholtz Resonator, Regarding as Equivalent Single-degree of Vibration System, Transactions of the Korean Society for Noise and Vibration Engineering, Vol. 4, No. 2, pp. 209-219.
  4. Dickey, N. S. and Selamet, A., 1996, Helmholtz Resonators: One-dimensional Limit for Small Cavity Length-to-diameter Ratios, Journal of Sound and Vibration, Vol. 195, No. 3, pp. 512-517. https://doi.org/10.1006/jsvi.1996.0440
  5. Selamet, A., Radavich, P. M., Dickey, N. S. and Novak, J. M., 1997, Circular Concentric Helmholtz Resonator, Journal of Acoustical Society of America, Vol. 101, No. 1, pp. 41-51. https://doi.org/10.1121/1.417986
  6. Selamet, A. and Ji, Z. L., 2000, Circular Asymmetric Helmholtz Resonators, Journal of Acoustical Society of America, Vol. 107, No. 5, pp. 2360-2369. https://doi.org/10.1121/1.428622
  7. Song, H.-Y. and Lee, D.-H., 2008, A Study on the Acoustic Absorption Performance of a Helmholtz Resonator, Transactions of the Korean Society for Noise and Vibration Engineering, Vol. 18, No. 1, pp. 71-79. https://doi.org/10.5050/KSNVN.2008.18.1.071
  8. Kim, S. R. and Kim, Y.-H., 2005, A Helmholtz Resonator Array Panel for Low Frequency Sound Absorption, Transactions of the Korean Society for Noise and Vibration Engineering, Vol. 15, No. 8, pp. 924-930. https://doi.org/10.5050/KSNVN.2005.15.8.924
  9. Xu, M. B., Selamet, A. and Kim, H., 2010, Dual Chamber Resonator, Applied Acoustics, Vol. 21, pp. 822-829.
  10. Bemman, Y., Frei, T., Jones, C. and Keck, M., 2005, Passive Exhaust Systems with Cylinder Deactivation, SAE 2005-01-2351.
  11. Selamet, A., Kim, H. and Huff, N. T., 2009, Leakage Effect in Helmholtz Resonators, Journal of the Acoustical Society of America, Vol. 126, No. 3, pp. 1142-1150. https://doi.org/10.1121/1.3183416
  12. Lee, I.-J., 2009, Effect of Leakage on the Noise Reduction of Helmholtz Resonator, Transactions of the Korean Society for Noise and Vibration Engineering, Vol. 19, No. 6, pp. 634-640. https://doi.org/10.5050/KSNVN.2009.19.6.634
  13. Lee, I. J., Jeon, K. and Park, J., 2013, The Effect of Leakage on the Acoustic Performance of Reactive Silencers, Applied Acoustics, Vol. 74, No. 4, pp. 479-484. https://doi.org/10.1016/j.apacoust.2012.10.002
  14. Ji, Z. L., Ma, Q. and Zhang, Z., 1994, Application of the Boundary Element Method to Predicting Acoustic Performance of Expansion Chamber Mufflers with Mean Flow, Journal of Sound and Vibration, Vol. 173, No. 1, pp. 57-71. https://doi.org/10.1006/jsvi.1994.1217
  15. Beranek, L. L. and Ver, I. L., 1992, Noise and Vibration Control Engineering, John Wiley & Sons, Inc., New York.
  16. ASTM E1050-98, 1998, Standard Test Method for Impedance and Absorption of Acoustical Materials Using a Tube, Two Microphones and a Digital Frequency Analysis System, American Society for Testing and Materials, pp. 951-961.