Carbon letters

Korean Carbon Society (한국탄소학회)
권호 표지
DOI QR코드

DOI QR Code

A Low-Density Graphite-Polymer Composite as a Bipolar Plate for Proton Exchange Membrane Fuel Cells

  • Dhakate, S.R. (Physics and Engineering of Carbon, Materials Physics and Engineering Division, CSIR-National Physical Laboratory) ;
  • Sharma, S. (Physics and Engineering of Carbon, Materials Physics and Engineering Division, CSIR-National Physical Laboratory) ;
  • Mathur, R.B. (Physics and Engineering of Carbon, Materials Physics and Engineering Division, CSIR-National Physical Laboratory)
  • Received : 2012.07.24
  • Accepted : 2012.12.17
  • Published : 2013.01.31
Download PDF
⟨ Previous Next ⟩

Abstract

The bipolar plate is the most important and most costly component of proton exchange membrane fuel cells. The development of a suitable low density bipolar plate is scientifically and technically challenging due to the need to maintain high electrical conductivity and mechanical properties. Here, bipolar plates were developed from different particle sizes of natural and expanded graphite with phenolic resin as a polymeric matrix. It was observed that the particle size of the reinforcement significantly influences the mechanical and electrical properties of a composite bipolar plate. The composite bipolar plate based on expanded graphite gives the desired mechanical and electrical properties as per the US Department of Energy target, with a bulk density of 1.55 $g.cm^{-3}$ as compared to that of ~1.87 $g.cm^{-3}$ for a composite plate based on natural graphite (NG). Although the bulk density of the expanded-graphite-based composite plate is ~20% less than that of the NG-based plate, the I-V performance of the expanded graphite plate is superior to that of the NG plate as a consequence of the higher conductivity. The expanded graphite plate can thus be used as an electromagnetic interference shielding material.

Keywords

References

  1. Joon K. Fuel cells: a 21st century power system. J Power Sources, 71, 12 (1998). http://dx.doi.org/10.1016/S0378-7753(97)02765-1.
  2. Lemons RA. Fuel cells for transportation. J Power Sources, 29, 251 (1990). http://dx.doi.org/10.1016/0378-7753(90)80024-8.
  3. Tsuchiya H, Kobayashi O. Mass production cost of PEM fuel cell by learning curve. Int J Hydrogen Energy, 29, 985 (2004). http://dx.doi.org/10.1016/j.ijhydene.2003.10.011.
  4. Larminie J, Dicks A. Fuel cell systems explained, Wiley, New York (2000).
  5. Makkus RC, Janssen AHH, de Brujin FA, Mallant RKAM. Stainless steel for cost-competitive bipolar plates in PEMFCs. Fuel Cell Bull, 3, 5 (2000). http://dx.doi.org/10.1016/S1464-2859(00)87319-8
  6. Wilson MS, Busick DN. Composites bipolar plate for electrochem ical cells, WO00/25372, US Patent, 6,248,467 (2000).
  7. Dhakate SR, Sharma S, Borah M, Mathur RB, Dhami TL. Development and characterization of expanded graphite-based nanocomposite as bipolar plate for polymer electrolyte membrane fuel cells (PEMFCs). Energy Fuels, 22, 3329 (2008). http://dx.doi.org/10.1021/ef800135f.
  8. Dhakate SR, Mathur RB, Kakati BK, Dhami TL. Properties of graphite-composite bipolar plate prepared by compression molding technique for PEM fuel cell. Int J Hydrogen Energy, 32, 4537 (2007). http://dx.doi.org/10.1016/j.ijhydene.2007.02.017.
  9. Dhakate SR, Mathur RB, Sharma S, Borah M, Dhami TL. Influence of expanded graphite particle size on the properties of composite bipolar plates for fuel cell application. Energy Fuels, 23, 934 (2009). http://dx.doi.org/10.1021/ef800744m.
  10. Kuan HC, Ma CCM, Chen KH, Chen SM. Preparation, electrical, mechanical and thermal properties of composite bipolar plate for a fuel cell. J Power Sources, 134, 7 (2004). http://dx.doi.org/http://dx.doi.org/10.1016/j.jpowsour.2004.02.024.
  11. Song LN, Xiao M, Meng YZ. Electrically conductive nanocomposites of aromatic polydisulfide/expanded graphite. Compos Sci Technol, 66, 2156 (2006). http://dx.doi.org/10.1016/j.compscitech.2005.12.013.
  12. Heo SI, Oh KS, Yun JC, Jung SH, Yang YC, Han KS. Development of preform moulding technique using expanded graphite for proton exchange membrane fuel cell bipolar plates. J Power Sources, 171, 396 (2007). http://dx.doi.org/10.1016/j.jpowsour.2007.05.110.
  13. FuelCell Info.Com. Available from: http://www.fuelcell-info.com.
  14. SGL Group. Available from: http://www.sglcarbon.com/sgl_t/fuelcells/products/bma5.html.
  15. Lawrence RJ. Low cost bipolar current collector-separator for electrochemical cells. US Patent, 4,214,969 (1980).
  16. Huang J, Baird DG, McGrath JE. Development of fuel cell bipolar plates from graphite filled wet-lay thermoplastic composite materials. J Power Sources, 150, 110 (2005). http://dx.doi.org/10.1016/j.jpowsour.2005.02.074.
  17. Hui C, Hong-bo L, Li Y, Jian-xin L, Li Y. Study on the preparation and properties of novolac epoxy/graphite composite bipolar plate for PEMFC. Int J Hydrogen Energy, 35, 3105 (2010). http://dx.doi.org/10.1016/j.ijhydene.2009.08.030.
  18. Wolf H, Willert-Porada M. Electrically conductive LCP-carbon composite with low carbon content for bipolar plate application in polymer electrolyte membrane fuel cell. J Power Sources, 153, 41 (2006). http://dx.doi.org/10.1016/j.jpowsour.2005.03.182.
  19. Mathur RB, Dhakate SR, Gupta DK, Dhami TL, Aggarwal RK. Effect of different carbon fillers on the properties of graphite composite bipolar plate. J Mater Process Technol, 203, 184 (2008). http://dx.doi.org/10.1016/j.jmatprotec.2007.10.044.

Cited by

  1. Effect of Carbon Fiber Filament and Graphite Fiber on the Mechanical Properties and Electrical Conductivity of Elastic Carbon Composite Bipolar Plate for PEMFC vol.25, pp.2, 2014, https://doi.org/10.7316/KHNES.2014.25.2.131
  2. Synergistic Effects of Carbon Fillers of Phenolic Resin Based Composite Bipolar Plates on the Performance of PEM Fuel Cell vol.16, pp.2, 2016, https://doi.org/10.1002/fuce.201500051
  3. Low Cost and Rapidly Processed Randomly Oriented Carbon/Carbon Composite Bipolar Plate for PEM Fuel Cell vol.16, pp.6, 2016, https://doi.org/10.1002/fuce.201600079
  4. Ultra-thin carbon/silicon carbide composite bipolar plate for advanced fuel cells vol.49, pp.1, 2018, https://doi.org/10.1002/mawe.201700036