DOI QR코드

DOI QR Code

전차륜 독립휠 구동 및 조향 제어 기반 특수목적용 6WD/6WS 차량의 주행제어 알고리즘 연구

A Study on Maneuvering Control Algorithm Based on All-wheel Independent Driving and Steering Control for Special Purpose 6WD/6WS Vehicles

  • 투고 : 2013.02.27
  • 심사 : 2013.05.17
  • 발행 : 2013.06.05

초록

This paper discusses the maneuvering control algorithm based on all-wheel independent driving and steering control techniques for special purpose 6WD/WS vehicles. The maneuvering control algorithms considering superior dynamic characteristics of high power in-wheel motors and independent steering system are designed to perform driving, steering, vehicle stability, and fault tolerant control. The maneuvering controller applies sliding and optimal control theories considering optimal torque distribution and friction circle related to the vertical tire force. The fault tolerant control algorithm is applied to obtain the similar maneuverability to that of the non-faulty vehicle. The simulations using the Matlab/Simulink dynamics model and experiments using HIL simulator mounting the real controllers with the designed control algorithms prove the improved performances in terms of vehicle stability and maneuverability.

키워드

참고문헌

  1. K. Huh, K. Jhang, J. Oh, J. Kim, and J. Hong, "Development of a Simulation Tool for the Cornering Performance Analysis of 6WD/6WS Vehicles", KSME International Journal, Vol. 13, No. 3, pp. 211-220, 1999. https://doi.org/10.1007/BF02970479
  2. M. Nagai, Y. Hirano, and S. Yamanaka, "Integrated Control of Active Rear Wheel Steering and Direct Yaw Moment Control", Vehicle System Dynamics, Vol. 27, pp. 357-370, 1997. https://doi.org/10.1080/00423119708969336
  3. O. Mokhiamar and M. Abe, "Simultaneous Optimal Distribution of Lateral and Longitudinal Tire Forces for the Model Following Control", Journal of Dynamic Systems, Measurement, and Control, Vol. 126, pp. 753-763, 2004. https://doi.org/10.1115/1.1850533
  4. Huh, K., Kim, J. and Hong, J., "Handling and Driving Characteristics for Six-wheeled Vehicle", Proc. Institution of Mechanical Engineers, Part D, J. Automobile Engineering 214, 2, pp. 159-170, 2000. https://doi.org/10.1177/095440700021400205
  5. Jackson, A. and Crolla, D., "Improving Performance of a 6×6 Off-road Vehicle Through Individual Wheel Control", SAE Paper No. 2002-01-0968, 2002.
  6. An, S. J., Yi, K., Jung, G., Lee, K. I. and Kim, Y. W., "Desired Yaw Rate and Steering Control Method During Cornering for a Six-wheeled Vehicle", Int. J. Automotive Technology, Vol. 9, No. 2, pp. 173-181, 2008. https://doi.org/10.1007/s12239-008-0022-9
  7. W. G. Kim, J. Y. Kang, and K. Yi, "Drive Control System Design for Stability and Maneuverability of a 6WD/6WS Vehicle", Int. J. of Automotive Technology, Vol. 12, No. 1, pp. 67-74, 2011. https://doi.org/10.1007/s12239-011-0009-9
  8. Chang-Jun Kim and Chang-Soo Han, "A Study on Independent Steering & Driving Control Algorithm for 6WS/6WD Vehicle", J. of Institute of Control, Robotics and Systems, Vol. 17, No. 4, pp. 313-320, 2011. https://doi.org/10.5302/J.ICROS.2011.17.4.313
  9. Heeseo Chae, Jaewon Na, Jitae Hong, and Daeok Lee, "3-Layer Fault Tolerance Strategy in 6×6 Hybrid Electric Vehicle Having Independent Steering and In-wheel Drives", IEEE 2012 Intelligent Vehicles Symposium, pp. 843-848, 2012.
  10. Daeok Lee, Seungtai Yeo, Jongseok Lee, Wongun Kim, and Jaewon Na, "A Study on Maneuvering Control System Design Based on All-wheel Independent Driving and Steering Control Approach for Special Purpose Electric Propulsion Vehicles", Proceedings of Military Science and Technology Conference, pp. 1931-1934, 2012.