Abstract
This study suggests a suitable logo design application of a three colors LED light source and flexible plastic optical fiber (POF). In this study, characteristic relevant brightness of (according to the embodiment conditions of the flexible POF for logo design) for smart clothing were analyzed through two experiments. The suitable conditions of the logo design for three colors of light source were observed in 'Experiment 1'. The angle of $80^{\circ}$ to $100^{\circ}$ and the length of 8cm to 16cm appeared a more suitable condition for green-colored and red-colored light sources. The angle of $80^{\circ}$ to $100^{\circ}$ at a length of 8cm to 12cm appeared a more suitable condition for a blue-colored light source. In 'Experiment 2', a 'Klavika' in small letter was selected as suitable logo design for the application POF. The alphabet was separated by a morpheme, which is the minimal linguistic unit. All alphabets were classified into sixteen morphemes. The luminance of fourteen morphemes (realized by the embroidery method) were measured and analyzed. Subsequently, eight morphemes appeared to show a relatively equal luminance of $3-4cd/m^2$ in a green-colored light source, $2-3cd/m^2$ in red-colored light source, and $2cd/m^2$ in a blue-colored light source. Four of the fourteen morphemes, showed a 20% brighter level of luminance compared to the eight morphemes above, the cast of combination of green or red light source. This result indicates that a flexible POF with 20% less luminance are believed more suitable for four morphemes combined with a green or red light source. The results of this study provide fundamental data for further approaches to clothing logo design for the application of a flexible POF.
