KSCE Journal of Civil and Environmental Engineering Research (대한토목학회논문집)

Korean Society of Civil Engeneers (대한토목학회)
권호 표지
DOI QR코드

DOI QR Code

Effects of Corrugated Webs on the Ultimate Behavior of Horizontally Curved I-shaped Girders

파형 복부판이 수평 곡선 I형 거더의 극한 거동에 미치는 영향

  • 김승준 ;
  • 한택희 (한국해양과학기술원 연안개발 에너지연구부) ;
  • 원덕희 (한국해양과학기술원 연안개발 에너지연구부) ;
  • 강영종 (고려대학교 건축사회환경공학과)
  • Received : 2013.03.13
  • Accepted : 2013.06.17
  • Published : 2013.07.30
Download PDF
⟨ Previous Next ⟩

Abstract

In this study, the effects of corrugated webs on the ultimate behavior of horizontally curved I-shaped girders are investigated. Because of the geometric characteristics of corrugated plates, corrugated webs can be used for enhancing torsional and warping stiffness of plate girders. Many researches have been conducted to study the effects of corrugated webs on the ultimate behavior of straight girders. But, the studies of the ultimate behavior of horizontally curved girders with corrugated webs, which generally show out-of plane behavior manly, have been rarely performed so far. By performing inelastic-nonlinear analysis, the ultimate behavior of curved girders with corrugated webs is studied in this paper. Laterally unsupported length and subtended angle of girders, and length of height of corrugation of webs are considered as the geometric parameters which would be expected to affect the ultimate behavior. By this analytical study with considering the geometric parameters, the changes of ultimate behavior and load carrying capacity of curved girders with corrugated webs are investigated. Also, the effects of corrugated webs on the increase of load carrying capacity for curved girders are studied with comparing to the capacity of general curved girders with flat webs. According to the analytical results, corrugated webs can be used to increase the ultimate load carrying capacity of curved girders, because of their high torsional and warping stiffness. But, it is also indicated that they may decrease the load carrying capacity of curved girders which have relatively small subtended angle or initial curvature, because of an accordion effect.

본 논문은 파형 복부판이 수평 곡선 I형 거더의 극한 거동에 미치는 영향을 다룬다. 파형 복부판은 기하학적 특성에 따라 플레이트 거더의 비틂 및 뒴 강성 증진을 위해 적용이 가능하다. 그동안 파형 복부판이 일반 직선 거더의 극한 거동에 미치는 영향을 다룬 많은 연구들이 있었으나, 면외 방향 거동이 주요하게 나타나는 곡선 거더의 극한 거동에 미치는 영향에 대한 연구는 거의 이루어지지 않았다. 이 연구에서는 비탄성-비선형 해석을 통해 파형 복부판 수평 곡선 I형 거더의 극한 거동을 다룬다. 본 해석 연구에서는 파형 복부판을 갖는 곡선 거더의 극한 거동에 영향을 미칠 수 있는 기하학적 인자로써, 곡선 거더의 횡방향 비지지 길이와 사잇각, 복부판의 파고 및 파장이 주요 매개변수로 고려되었다. 본 해석 연구를 통해, 각 매개변수 변화에 따른 극한 거동 및 내하력 변화를 분석하고, 일반 판형 복부판이 적용된 거더의 내하력과 비교하여 파형 복부판이 내하력 증진에 미치는 영향을 도출하였다. 본 해석 결과에 따르면, 높은 비틂 및 뒴 강성에 의해 파형 복부판은 곡선 거더의 내하력 증진에 효과적인 것으로 나타났다. 그러나 곡선 거더의 곡률 또는 사잇각이 작은 경우, 파형 판의 아코디언 효과에 의해 오히려 내하력이 감소될 수 있다는 것 또한 나타났다.

Keywords

References

  1. Ahn, W. C., Han, T. H., Lim, N. H. and Kang, Y. J. (2003). "Buckling behavior of corrugated steel pipe under external uniform pressure." Journal of Korean Society of Steel Structures, Vol. 15, No. 1, pp. 33-40 (in Korean).
  2. Han, T. H., Kim, T. Y., Han, K. H. and Kang, Y. J. (2007). "Elastic buckling characteristics of corrugated pipe made of orthotropic composite material." Journal of the Korea institute for Structural Maintenance and Inspection, Vol. 11, No. 2, pp. 77-84 (in Korean).
  3. Han, T. H., Lim, N. H., Park, N. H. and Kang, Y. J. (2002). "Elastic shear buckling characteristics of circularly corrugated plates." Journal of Korean Society of Steel Structures, Vol. 14, No. 4, pp. 529-538 (in Korean).
  4. Ji, H. S. (2011). "Buckling behaviors of plate girder with corrugated steel web." Journal of Korean Society of Steel Structures, Vol. 23, No. 2, pp. 221-228 (in Korean).
  5. Moon, J. H., Yi, J. W., Choi, B. H. and Lee, H. E. (2007). "Evaluation of lateral-torsional buckling strength of I-girder with corrugated web under uniform bending." Journal of Korean Society of Steel Structures, Vol. 19, No. 5, pp. 463-472 (in Korean).
  6. Kim, S., Jeon, J. S., Won, D. H. and Kang, Y. J. (2012). "Torsional and warping constants of I-shaped plate girders with a sine corrugated web." Journal of Korean Society of Civil Engineers, Vol. 32, No. 6, pp. 347-354 (in Korean). https://doi.org/10.12652/Ksce.2012.32.6A.347
  7. ABAQUS (2010). Abaqus analysis user's manual version 6.10, Dassault Systemes Simulia Corp.
  8. Abbas, H. H., Sause, R. and Driver, R. G. (2006). "Behavior of corrugated web I-girders under in-plane loading." Journal of Engineering Mechanics, ASCE, Vol. 132, No. 8, pp. 806-814. https://doi.org/10.1061/(ASCE)0733-9399(2006)132:8(806)
  9. Abbas, H. H., Sause, R. and Driver, R. G. (2007). "Analysis of flange transverse bending of corrugated web I-girders under in-plane loads." Journal of Structural Engineering, ASCE, Vol. 133, No. 3, pp. 347-355. https://doi.org/10.1061/(ASCE)0733-9445(2007)133:3(347)
  10. Elgaaly, M., Seshadri, A. and Hamilton, R. W. (1997). "Bending strength of steel beams with corrugated webs." Journal of Structural Engineering, ASCE, Vol. 123, No. 6, pp. 772-782. https://doi.org/10.1061/(ASCE)0733-9445(1997)123:6(772)
  11. Kang, Y. J. (1992). Nonlinear theory of thin walled curved beams and finite element formulation, PhD Dissertation, Auburn University, Auburn, AL, USA.
  12. Kang, Y. J., Sung, I. H., Lee, S. S. and Gil, H. B. (1996). "Lateral buckling strength of horizontally curved I-girder." Proceedings of 4th Japan-Korea Joint Seminar on Steel Bridges, Osaka, Japan, pp. 387-395.
  13. Kang, Y. J. and Yoo, C. H. (1994a). "Thin-walled curved beams. I: Formulation of nonlinear equations." Journal of Engineering Mechanics Division, ASCE, Vol. 120, No. 10, pp. 2072-2101. https://doi.org/10.1061/(ASCE)0733-9399(1994)120:10(2072)
  14. Kang, Y. J. and Yoo, C. H. (1994b). "Thin-walled curved beams. II: Analytical solutions for buckling of arches." Journal of Engineering Mechanics Division, ASCE, Vol. 120, No. 10, pp. 2102-2125. https://doi.org/10.1061/(ASCE)0733-9399(1994)120:10(2102)
  15. Lindner, J. (1990). "Lateral torsional buckling of beams with trapezoidally corrugated webs." Stability of Steel Structures, Budapest, Hungary, pp. 305-310.
  16. Nakai, H. and Yoo, C. H. (1988). Analysis and design of curved steel bridges, McGraw-Hill, New York, USA.
  17. Pi, Y. L. and Bradford, M. A. (2000). "Inelastic analysis and behavior of steel I-beams curved in plan." Journal of Structural Engineering Division, ASCE, Vol. 126, No. 7, pp. 772-779. https://doi.org/10.1061/(ASCE)0733-9445(2000)126:7(772)
  18. Sayed-Ahmed, E. Y. (2004). "Lateral torsion-flexure buckling of corrugated web steel girders." Proceedings of the ICE - Structures and Buildings, 158(1), pp. 53-69.
  19. Yoo, C. H., Kang, Y. J. and Davidson, J. S. (1996). "Buckling analysis of curved beams by finite element discretization." Journal of Engineering Mechanics Division, ASCE, Vol. 122, No. 8, pp. 762-770. https://doi.org/10.1061/(ASCE)0733-9399(1996)122:8(762)

Cited by

  1. DStrength and Lateral Torsional Behavior of Horizontally Curved Steel I-Girders Subjected to Equal End Moments vol.30, pp.1, 2018, https://doi.org/10.7781/kjoss.2018.30.1.001