References
- 에너지경제연구원, "플라이애쉬와 시멘트 클링커 대체 성능과 재활용 수급 전망", 13, 105-109, 2003.
- S. W. Oh, "Economic Analysis of Dry Bottom Ash Handling System in a Pulverized Coal Thermal Power Plant in Korea (II) - Case Study for Retrofitting the Existing Facility", J Korean Inst Resources Recycling, 2005, 14(2), 56-61.
- H. J. Park, K. S. Kim, S. R. Yang, and G. H. Lee, "Studies on the Analytical Methods of Coal Ash", J Korean Chem Soc, 2000, 44(6), 563-572.
- H. Y. Park, S. I. Seo, S. C. Kim, and D. S. Kang, "Reburning of Bottom Ash in a Coal-fired Power Plant and Its Effect on the Plant Management", J Material Cycles and Waste Management, 2007, 24(5), 472-481.
- G. J. Cho, Y. N. Kim, B. R. Lim, and S. K. Lee, "Effect of Admixture and Curing Methods on Solidification of Fly Ash from Sewage Sludge Incinerator", J Korea Society of Waste Management, 2009, 13(2), 93-99.
- S. K. Kim and T. Y. Lee, "Analyses of Chemical Compositions and Water Leaching Tests for Bottom Ash Obtained from Thermal Power Plant", Korean Geo-Environmental Conference, pp.384-352, Seoul, 2009.
- J. H. Lee, E. Z. Park, S. G. Son, Y. D. Kim, and W. K. Lee, "Characteristic of Inorganic Paste Prepared from MSWI Bottom Ash with Activator", J Korea Society of Waste Management, 2008, 13(2), 69-71.
- S. M. Park and H. G. Kim, "Characteristics and Strength Evaluation of the Mixed Material of Fly Ash from Municipal Solid Waste Incinerator and the Recycled Polypropylene", Environ Eng Res, 2006, 11(5), 257-265. https://doi.org/10.4491/eer.2006.11.5.257
- P. Zhang and Q. F. Li, "Effect of Polypropylene Fiber on Durability of Concrete Composite Containing Fly Ash and Silica Fume", Composites-Part B Eng, 2013, 45, 1587-1594. https://doi.org/10.1016/j.compositesb.2012.10.006
- L. D. Windt, D. Dabo, S. Lidelow, R. Badreddine, and A. Lagerkvist, "MSWI Bottom Ash Used as Basement at Two Pilot-scale Roads : Comparison of Leachate Chemistry and Reactive Transport Modeling", Waste Management, 2011, 31, 267-280. https://doi.org/10.1016/j.wasman.2010.06.002
- G. W. You, J. W. Ahn, G. C. Han, and H. C. Cho, "Neutralizing Capacity of Bottom Ash from Municipal Solid Waste Incineration of Different Particle Size", Korean J Chem Eng, 2006, 23(2), 237-240. https://doi.org/10.1007/BF02705722
- B. Haworth, C. L. Raymond, and I. Sutherland, "Polyethylene Compounds Containing Mineral Fillers Modified by Acid Coating", Polym Eng Sci, 2001, 41(8), 1345-1364. https://doi.org/10.1002/pen.10835
- W. K. Son and T. S. Hwang, "The Flame Retardance and Mechanical properties of Wood Powder-filled PP Composites", J Korean Ind Eng Chem, 1999, 10(1), 46-50.
- M. Du, B. Guo, M. Liu, X. Cai, and D. Jia, "Reinforcing Thermoplastics with Hydrogen Bonding Bridged Inorganics", Physica B, 2010, 405, 655-662. https://doi.org/10.1016/j.physb.2009.09.082
- J. H. Lee, B. G. Lee, K. H. Park, D. S. Bang, K. H. Jhee, and M. C. Sin, "Preparation and Characterization of Wood Polymer Composite by a Twin Screw Extrusion", Elastomers and Composites, 2011, 46(3), 211-217.
- Y. K. Yun and J. H. Kim, "The Strength Characteristics of Polymer Composites Injection Parts for Lightness and Safety", J Korea Safety Management & Science, 2011, 13(4), 101-108.
- R. S. Hadal and R. D. K. Misra, "The Influence of Loading Rate and Concurrent Microstructural Evolution in Micrometric Talc- and Wollastonite-reinforced High Isotatic Polypropylene Composites", Mater Sci Eng A, 2004, 374, 374-389. https://doi.org/10.1016/j.msea.2004.03.035
- A. Dasari, S. Sarang, and R. D. K. Misra, "Strain Rate Sensitivity of Homopolymer Polypropylenes and Micrometric Wollastonite-filled Polypropylene Composites", Mater Sci Eng, 2004, A368, 191-204.
- Q. Yuan, W. Jiang, H. Zhang, J. Yin, L. An, and R. K. Y. Li, "Brittle-Ductile Transition on High-Density Polyethylene/Glass-Bead Blends: Effects of Interparticle Distance and Temperature", J Polym Sci: Part B: Phys, 2001, 39, 1855-1859 https://doi.org/10.1002/polb.1160
-
X. Dai, Q. K. Shang, Q. Jia, S. Li, and Y. Xiu, "Preparation and Properties of HDPE/
$CaCO_3$ /OMMT Ternary Nanocomposite", Polym Eng Sci, 2010, 894-899.