Transactions of the Korean Society for Noise and Vibration Engineering (한국소음진동공학회논문집)

The Korean Society for Noise and Vibration Engineering (한국소음진동공학회)
권호 표지
DOI QR코드

DOI QR Code

Parametric Study for the Squeal Noise Reduction of an Automobile Water Pump

자동차용 워터펌프의 스퀼소음 저감을 위한 영향도 분석

  • Received : 2013.04.01
  • Accepted : 2013.05.28
  • Published : 2013.07.20
Download PDF
⟨ Previous Next ⟩

Abstract

In this study, a parametric study is performed to investigate the squeal noise of an automobile water pump. The squeal noise studied in this paper is generated by the self-excited torsional resonance of the rotating shaft, and this noise is related to the stick-slip phenomenon of the mechanical seal in the water pump. The mechanical seal friction has the characteristics of the negative velocity-gradient. The equations of motion of multiple-degree-of-freedom torsional vibration model is constructed by the Holzer's method and then the equation is transformed to an equivalent single-degree-of-freedom torsional resonance simulation model. A squeal noise criteria is determined by the simulation model to perform the parametric study. The design parameters(the mass moment of inertia of the pulley, the mass moment of inertia of the impeller, the length of the shafts, the radius of the shafts, spinning speed of the shafts, the position of the mechanical seal, radius of the mechanical seal, and normal load of the mechanical seal) are investigated to confirm the stability for the squeal noise.

Keywords

References

  1. Kinkaid, N. M., O'Reilly, O. M. and Papadopoulos, P., 2003, Automotive Disc Brake Squeal, Journal of Sound and Vibration, Vol. 267, No. 1, pp. 105-166. https://doi.org/10.1016/S0022-460X(02)01573-0
  2. Ouyang, H., Nack, W., Yuan, Y., Chen, F., 2005, Numerical Analysis of Automotive Disc Brake Squeal: a Review, International Journal of Vehicle Noise and Vibration, Vol. 1, No. 3/4, pp. 207-231. https://doi.org/10.1504/IJVNV.2005.007524
  3. Ammar, A., Yousif, M., Inzarulfaisham, A. R., Analysing the Disc Brake Squeal: Review And Summary, International Journal of Scientific & Technology Research, Vol. 2, No. 4, pp. 67-72.
  4. Kido, I. Kurahachi, T. and Asai, M., 1996, A Study on Low-frequency Brake Squeal Noise, SAE, 960993.
  5. Chiba, K., Komiya, M., Yanagisawa, T. and Hirabayashi, H., 1992, FEM Analysis of Mechanical Seals for Water Pumps of Automotive Engines, SAE Technical Paper, 920714.
  6. Kiryu, K., Yanai, T., Matsumoto, S. and Koga, T, 1985, An Analysis of "ringing" Phenomena on a Water Pump Mechanical Seal, ASLE Transactions, Vol. 28, No. 2, pp. 261-267. https://doi.org/10.1080/05698198508981620
  7. Kiryu, K., Yanai, T., Matsumoto, S. and Koga, T, 1986, An Analysis of "ringing" Phenomena on a Water Pump Mechanical Seal(Part II), ASLE Transactions, Vol. 29, No. 1, pp. 25-34. https://doi.org/10.1080/05698198608981656
  8. Ono, K., Nomoto, Y. and Onigata, J., 2000, Analysis of Squeak in Mechanical Seal Used in Water Pumps, SAE, 2000-01-0603.
  9. Jung, S., 2011, A Study on the Squeal Noise Related to Friction Coefficient between Vehicle Wiper Blade and Glass, KSME, Vol. 2011, No. 5, pp. 58-59.