참고문헌
- Peters, T. M. and Leith, D., 2004, Modeling Large- Particle Deposition in Bends of Exhaust Ventilation Systems, Aerosol Science and Technology, Vol. 38, pp. 1171-1177. https://doi.org/10.1080/027868290896834
- Peters, T. M. and Leith, D., 2004, Measurement of Particle Deposition in Industrial Ducts, Aerosol Science Vol. 35, pp. 529-540. https://doi.org/10.1016/j.jaerosci.2003.10.004
- Zhang, Z., Chen, X., Mazumdar, S., Zhang, T., and Chen, Q., 2009, Experimental and Numerical Investigation of Airflow and Contaminant Transport in an Airliner Cabin Mockup, Building and Environment, Vol. 44, pp. 85-94. https://doi.org/10.1016/j.buildenv.2008.01.012
- Sun, K., Lu, L., and Jiang, H., 2012, A Numerical Study of Bend-induced Particle Deposition in and behind Duct Bends, Building and Environment, Vol. 52, pp. 77-87.
- Huang, Z., Zhu, Z., Liu, Z., and Liu, Q., 2003, Formation and Reaction of Ammonium Sulfate Salts on V2O5/AC Catalyst During Selective Catalytic Reduction of Nitric Oxide by Ammonia at Low Temperatures, Journal of Catalysis, Vol. 214, pp. 213-219. https://doi.org/10.1016/S0021-9517(02)00157-4
- Heering, H. P., Onder, C. H., Elsener, M., and Schaer, C. M., 2003, Control of a Urea SCR Catalytic Converter System for a Mobile Heavy Duty Diesel Engine, SAE 2003-01-0776.
-
Jeong, S. J. and Lee, C. H., 2008, A Study on the Injection Characteristics of Urea Solution to Improve
$deNO_x$ Performance of Urea-SCR Catalyst in a Heavy Duty Diesel Engine, Transactions of KSAE, Vol. 16, No. 4, pp. 165-172. - Grout, S., Blaisot, J., Pajot, K., and Osbat, G., 2012, Experimental Investigation on the Injection of An Urea-water Solution in Hot Air Stream for the SCR Application:Evaporation and Spray/Wall Interaction, Fuel, Available:http://dx.doi.org/10.1016/j.fuel.2012.09.022.
-
Jeong, S. J., Lee, S. J., Kim, W. S., and Lee, C. B., 2006, Numerical Study on the Injector Shape and Location of Urea SCR System of Heavy-duty Diesel Engine for Preventing
$NH_3$ Slip, Transactions of KSAE, Vol. 14, No. 1, pp. 68-78. - Seo, J. W., Lee, K. I., Oh, J. T., Choi, Y. H., Lee, J. H., and Park, J. I., 2008, The Study on the Effects of Mixer Configurations on Fluid Mixing Characteristics in SCR Systems, Transactions of KSAE, Vol. 16, No. 6, pp. 192-199.
- Shuyang, C. and Tetsuro, T., 2007, Effects of Roughness Blocks on Atmospheric Boundary Layer Flow over a Two-dimensional Low Hill with/without Sudden Roughness Change, Journal of Wind Engineering and Industrial Aerodynamics, pp. 679-695.
- Moss, W. and Baker, S., 1980, Re-circulating Flows Associated with Two-dimensional Steps, Aeronautical Quartaerly, pp. 151-172.
- Moon, C., Park, J. C., and Kim, C., 1994, Flow Visualization and Numerical Calculation in a Channel Perturbed by Curvilinear Blockages, Korean Journal of Air-Conditioning and Refrigeration Engineering, Vol. 6, No. 3, pp. 218-226.
- Mudgal, B. V. and Pani, B. S., 1998, Flow around Obstacles in Plane Turbulent Wall Jets, Journal of Wind Engineering and Industrial Aerodynamics, Vol. 73, pp. 193-213. https://doi.org/10.1016/S0167-6105(97)00288-2
-
Fluent User Guide 6.2, The RNG k-
$\varepsilon$ Model, pp. 11-17. - Singh, R. K. and Seshadri, V., 2009, Study on the Effect of Vertex Angle and Upstream Swirl on the Performance Characteristics of Cone Flowmeter using CFD, Flow measurement and Instrumentation, Vol. 20, pp. 69-74. https://doi.org/10.1016/j.flowmeasinst.2008.12.003
- Verhoff, A., 1963, The Two-dimensional Turbulent Wall Jet with and without an External Stream, Princeton University, Report # 629.