한국정밀공학회지 (Journal of the Korean Society for Precision Engineering)

  • 제30권8호
  • /
  • Pages.797-801
  • /
  • 2013
  • /
  • 1225-9071(pISSN)
  • /
  • 2287-8769(eISSN)
한국정밀공학회 (Korean Society for Precision Engineering)
권호 표지
DOI QR코드

DOI QR Code

고장력강 범퍼 빔의 롤 포밍 공정

Roll Forming Analysis for High Strength Steel Bumper Process

  • 투고 : 2013.05.23
  • 심사 : 2013.07.04
  • 발행 : 2013.08.01
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

Today's automotive industry is evolving toward low-emissions or zero-emissions high-efficiency vehicles. Highly efficient power sources are required, as well as high strength steels for various parts to increase safety. In this study, we investigated the roll-forming process for the development of high strength, lightweight steel bumper beams. The roll-forming process was analyzed using the software package Shape-RF in combination with a rigid-plastic finite element method model. An optimal roll-forming process based on roll-pass was obtained using finite element method simulations.

키워드

참고문헌

  1. Drozda, T., Bakerjian, R., Wick, C., Benedict, J. T., Veilleux, R. F., and Society of Manufacturing Engineers, "Tool and Manufacturing Engineers Handbook 4th edition (Vol. 6: Design for Manufacturable)," Society of Manufacturing Engineers, 4th Edition, pp. 110-350, 1992.
  2. Jeong, S. H., Lee, S. H., Kim, G. H., Kim, J. S., and Kim, J. T., "A Study on Roll Forming Simulation of Under Rail," Transactions of the Korean Society of Machine Tool Engineers, Vol. 17, No. 3, pp. 78-85, 2008.
  3. Kiuchi, M., "Analysis Study on Cold Roll Forming Process," Report of the Inst. of Ind. Sci., Vol. 23, pp. 1-23, 1973.
  4. Kiuchi, M. and Koudobashi, T., "Automated Design System of Optimum Roll Profiles for Cold Roll Forming Proc," 3rd Int. Conf. on Rotary Metal Working Process, pp. 423-427, 1984.
  5. Farzin, M., Salmani, M., and Shameli, E., "Determination of Buckling limit of Strain in Cold Roll Forming by the Finite Element Analysis," Materials Processing Technology, Vol. 125-126, pp. 626-632, 2002. https://doi.org/10.1016/S0924-0136(02)00357-6
  6. Grondin, G. Y., Elwi, A. E., and Cheng, J. J., "Buckling of Stiffened Steel Plates-A Parametric Study," Journal of Constructional Steel Research, Vol. 50, pp. 151-175, 1999. https://doi.org/10.1016/S0143-974X(98)00242-9
  7. Rhodes, J., "A Semi-analytical Approach to Buckling Analysis for Composite Structures," Composite Structures, Vol. 35, No. 1, pp. 93-99, 1996. https://doi.org/10.1016/0263-8223(96)00026-8
  8. Jeong, S. H. and Lee. S. H., "3D Modeling of a cold roll-forming process using FEM," Korean society of Manufacturing Technology Engineers Fall Conference, pp. 733-738, 2007.
  9. Lee, T. S. and Kim, G. W., "Finite Element Analysis for Precision Roll Forming Process of Stainless Slide Rail," J. Korean Soc. Precis. Eng., Vol. 26, No. 8, pp. 96-103, 2009.
  10. Kim, D. K., Kim, Y. S., Lee, K. H., and Lee, M. Y., "Analysis of effects of the roll forming process parameters of bumper rail," Trans. Korean Soc. Mech. Eng., pp. 19-23, 2006.

피인용 문헌

  1. Study on Spring-Back Effect according to Roll Gap and Forming Velocity of Roll Forming Process vol.33, pp.6, 2016, https://doi.org/10.7736/KSPE.2016.33.6.477
  2. Study on springback of high tension steel following various temperature and local pre-heating in the roll forming process vol.103, pp.1757-899X, 2015, https://doi.org/10.1088/1757-899X/103/1/012035
  3. A Study on the Sheet Forming of the Lower Seat Rail using 1180 TRIP Steel vol.19, pp.2, 2018, https://doi.org/10.1007/s12541-018-0036-9
  4. Process Design of Automobile Seat Rail Lower Parts using Ultra-High Strength, DP980 Steel vol.17, pp.2, 2018, https://doi.org/10.14775/ksmpe.2018.17.2.160