참고문헌
- Dewson, S. J. and Grady, C., October 2nd, 2003, HEATRIC Workshop at MIT. Cambridge, MA, U.S.A..
-
Ishizuka, T., Kato, Y., Muto, Y., Nikitin, K., Tri, N. L., Hashimoto, H., 2005, "Thermal-Hydraulic Characteristics of a Printed Circuit Heat Exchanger in a Supercritical
$CO_2$ Loop," The 11th International Topical Meeting on Nuclear Reactor Thermal-Hydraulics, Avignon, France paper 218. -
Nikitin, K., Kato, Y., Ngo, L., 2006, "Printed Circuit Heat Exchanger Thermal-Hydraulic Performance in Supercritical
$CO_2$ Loop," International Journal of Refrigeration, Vol. 29, pp. 807-814 https://doi.org/10.1016/j.ijrefrig.2005.11.005 - Kim, D. E., Kim, M. H., Cha, J. E., Kim, S.O., 2008, "Numerical Investigation on Thermal-Hydraulic Performance of New Printed Circuit Heat Exchanger Model," Nuclear Engineering and Design, Vol. 238, pp. 3269-3276. https://doi.org/10.1016/j.nucengdes.2008.08.002
- Ngo, L., Kato, Y., Nikitin, K., Tsuzuki, N., 2006, "New Printed Circuit Heat Exchanger with S-shaped Fins for Hot water Supplier," Experimental Thermal and Fluid Science, Vol. 30, No. 8, pp. 811-819. https://doi.org/10.1016/j.expthermflusci.2006.03.010
- Pra, F., Tochon, P., Mauget, C., Fokkens, J., Willemsen, S., 2008, "Promising designs of compact heat exchangers for modular HTRs using the Brayton cycle," Nuclear Engineering and Design, Vol. 238, pp. 3160-3173. https://doi.org/10.1016/j.nucengdes.2007.12.024
- Kim, I. H., No, H. C., Lee, J. I., Jeon, B. G., 2010, "Thermal-hydraulic Behavior in a Deteriorated Turbulent Heat Transfer for a Gas-Cooled Reactor," Nuclear Engineering and Design, Vol. 240, pp. 783-795. https://doi.org/10.1016/j.nucengdes.2009.11.004
- Oh, C. H., Kim, E. S., Sherman, S., Kim, J. H., No, H. C., 2008, "Application of Gamma Code Coupled with Turbomachinery Models for High Temperature Gas-Cooled Reactors," The 12th International Symposium on Transport Phenomena and Dynamics of Rotating Machinery(ISROMAC12), ISROMAC12-2008-20224.
- Lee, S. M., Kim, K. Y., 2011, "A Parametric Study on Fluid Flow and Heat Transfer in a Printed Circuit Heat Exchanger," Proceedings of the ASME/JSME 2011 8th Thermal Engineering Joint Conference(AJTEC2011), AJTEC2011-44629
- Southall, D., Le Pierres, R., Dewson, S. J., 2008, "Design considerations for compact heat exchangers," Proceedings of ICAPP '08, Anaheim, CA, USA, Paper No. 8009.
- Sacks, J. W., Welch, J., Mitchell, T. J. and Wynn, H. P., 1989, "Design and analysis of computer experiments," Statistical Sci., Vol. 4, No. 4, pp. 409-435. https://doi.org/10.1214/ss/1177012413
- Mckay, M. D., Beckman, R. J. and Conover, W. J., 1979, "A Comparison of Three Methods for Selecting Values of Input Variables in the Analysis of Output from a Computer Code," Technometrics, Vol. 21, pp. 239-245.
- CFX-11.0 Solver Theory, Ansys inc., 2008.
- Menter FR., 1994, "Two-Equation Eddy-Viscosity Turbulence Models for Engineering Applications." AIAA Journal, Vol. 32, pp. 1598-1605. https://doi.org/10.2514/3.12149
- Bardina, J. E., Huang, P. G., Coakley, T., 1997, "Turbulence Modeling Validation," 28th AIAA Fluid Dynamics Conference, Snow Village, CO, USA, AIAA paper pp. 1997-2121.
- Lee, S. M., Koo, G. W., Kim, K. Y., 2012, "Parametric study on hydraulic performance of an inlet plenum in a printed-circuit heat exchanger," 5th International Symposium on Fluid Machinery and Fluids Engineering (ISFMFE 2012), 32-3.
피인용 문헌
- vol.17, pp.2, 2014, https://doi.org/10.5293/kfma.2014.17.2.077