참고문헌
- Becker, E., Chan, C. K., and Seed, H.B., (1972). "Strength and deformation characteristics of rockfill materials in plane strain and triaxial compression tests," Report No. TE 72-3, Department of Civil and Environmental Engineering, University of California, Berkeley, Berkeley, CA.
- Chavez, C. and Alonso, E. E., (2003). "A constitutive model for crushed granular aggregates which include suction effects," Soils Found., Vol. 43, No. 4, pp. 215-227. https://doi.org/10.3208/sandf.43.4_215
- Frost, R.J., (1973). "Some Testing experiences and characteristics of boulder-gravel fills in earth dams," Evaluation of Relative Density and its Roll in Geotechnical Projects Involving Cohesionless Soils, ASTM STP 523, E.T. Selig, and R.S. Ladd, Eds, ASTM, Philadelphia, PA, pp. 523-207.
- Fumagalli, E., (1969). "Tests on cohesionless materials for rockfill dams," J. Soil Mech. Found. Eng., ASCE, Vol. 95, No.SM1, pp. 313-332.
- Gupta, A.K., (2009). "Traixial behavior of rockfill materials," Electrical J. Geotech. Eng., Vol.14, pp.1-18.
- Hu, W., Dano, C., Hicher, P.-Y., LeTouzo, J.-Y., Derkx, F., and Merliot, E., (2011). "Effect of Sample Size on the Behavior of Granular Materials," Geotech. Testing Journal, Vol.34, No.3, pp.1-12.
- JGS 0542-2000, 1999: Method for Cyclic Triaxial Test to Determine Deformation Properties of Geomaterials, Tokyo, Japan.
- Kweon, G.C. 1999. "Alternative testing methods for subgrade and sub-base materials considering deformational characteristics of soils," Ph.D. dissertation, KAIST, Taejon, Korea.
- Lee, S.J., Choo, Y.W., Hwang, S.B. and Kim, K.J (2012). "Test method for Young's modulus of parallel graded coarse granular materials by large triaxial test," Korea Society of Civil Engineers, Vol.32, No.5C, pp.211-220. https://doi.org/10.12652/Ksce.2012.32.5C.211
- Lee, S.J., Choo, Y.W., Lee, I.W. and Hwang, S.K (2011). "calibration of large triaxial testing system for reliable dynamic properties using urethane specimen, international symposium on deformation characteristics of geomaterials," Sep. 1-3, Seoul Korea, pp. 328-333.
- Marsal, R. J., (1965). Discussion, Proc. of the 6th Int. Conf. on Soil Mech. and Found. Eng., Vol.3, pp.310-316
- Marsal, R. J., (1967). "Large-scale testing of rockfill materials," J Soil Mech. and Found. Eng., ASCE, Vol. 93, No. SM2, pp. 27-44.
- Marachi, N.D., Chan, C.K., and Seed, H.B., (1972). "Evaluation of properties of rockfill materials," J. Soil Mech. and Found. Eng., ASCE, Vol.98, No.SM1, pp.95-114.
- Uemoto,Y., Shibuya, S., Hashimoto, Y., and Kawajir, S., (2011). "Influence of grain size distribution characteristics on compaction and deformation-strength characteristics of gravelly fill material," Japanese Geotechnical Journal ,Vol. 6, No. 2, pp.181-190. https://doi.org/10.3208/jgs.6.181
- Varadarajan, A., Sharma, K.G., Venkatachalam, K., and Gupta, A.K., (2003). "Testing and modeling two rockfill materials," J. Geotech. and Geoenviron. Eng., ASCE, Vol.129, No.3, pp.206-218. https://doi.org/10.1061/(ASCE)1090-0241(2003)129:3(206)
피인용 문헌
- Evaluation of Resilient Modulus for Reinforced Trackbed using Large Triaxial Tests vol.17, pp.6, 2014, https://doi.org/10.7782/JKSR.2014.17.6.415