DOI QR코드

DOI QR Code

Study on the Apply Characteristics to the Gasoline Engine of Exhaust Heat Recovery Device Counterflow

대향류식 배기열 회수장치의 가솔린기관 적용 특성에 관한 연구

  • Shin, Suk-Jae (Department of Mechanical Engineering, Graduate School, Kongju National University) ;
  • Kim, Jong-Il (Dgenx Co. Ltd. R&D Center) ;
  • Jung, Young-Chul (Division of Mechanical & Automotive Engineering, Kongju National University) ;
  • Choi, Doo Seuk (Division of Mechanical & Automotive Engineering, Kongju National University)
  • 신석재 (공주대학교 대학원 기계공학과) ;
  • 김종일 (디젠스(주) 기술연구소) ;
  • 정영철 (공주대학교 기계자동차공학부) ;
  • 최두석 (공주대학교 기계자동차공학부)
  • Received : 2012.11.26
  • Accepted : 2013.01.24
  • Published : 2013.07.01

Abstract

The purpose of this study is to investigate the performance characteristics of the counterflow exhaust heat recovery device for the applied gasoline engines. The EHRS device is installed behind the catalyst. This study investigates the engine warm-up characteristic, the exhaust noise characteristic, the back-pressure characteristic. The engine warm-up characteristics is (load 0%, load 10%, load 20%) in (idle, 1000rpm, 1500rpm, 2000rpm, 2500rpm) conditions by measuring the time it warmed up, coolant temperature ($25^{\circ}C{\sim}80^{\circ}C$) until the performance evaluation is performed. The wide open throttle and the coast down the exhaust noise and the back-pressure characteristic experiment repeated twice. The test conditions is 950rpm~6,050rpm proceed experiment repeated 3-5 times. Load 0% idle conditions except the results improved engine warm-up characteristics. The exhaust noise obtain similar results the BASE+EHRS W/O_FRT_MUFF with BASE and back-pressure to obtain similar results BASE+EHRS W/O_FRT_ MUFF with BASE+EHRS.

Keywords

References

  1. R. Stobart and R. Weerasinghe, "Heat Recovery and Bottoming Cycles for SI and CI Engines-A Perspective," SAE 2006-01-0662, 2006.
  2. T. Endo, S. Kawajiri, Y. Kojima, K. Takahashi, T. Bada, S. Ibaraki, T. Takahashi and M. Shinohara, "Study on Maximizing Energy in Automotive Engines," SAE 2007-01-0257, 2007.
  3. H. C. Suh, K. J. Kim, S. W. Jang and K. S. Park, "Study on the Warming-up Performance of the Engine with Exhaust Heat Recovery System," KSAE Annual Conference Proceedings, pp.713-720, 2010.
  4. D. A. Arias, T. A. Shedd and R. K. Jester, "Theoretical Analysis of Waste Heat Recovery from an Internal Combustion Engine in a Hybrid Vehicle," SAE 2006-01-1605, 2006.
  5. N. Kawamoto, K. Naiko, T. Kawai, T. Shikida and M. Tomatsuri, "Development of New 1.8-liter Engine for Hybrid Vehicle," SAE 2009-01-1061, 2009.
  6. Y. D. Choung, H. S. Heo, K. C. Oh, D. H. Lee, H. K. Lee, S. J. Bae, H. C. Suh and K. S. Park, "An Experimental Study on the Exhaust Heat Recovery Device for the Engine Fast Warm-up," KSAE Spring Conference Proceedings, pp.265-270, 2010.
  7. Y. J. Hong, D. S. Choi and J. I. Kim, "Study on the Performance Characteristics and Heat Flow Analysis of Exhaust Heat Recovery Device in Automobile," Transactions of KSAE, Vol.20, No.2, pp.78-84, 2012. https://doi.org/10.7467/KSAE.2012.20.2.078