References
- Senuma, Takehide : Physical Metallurgy of Modern High Strength Steel Sheets, ISIJ Int, 41 (2001), 520 https://doi.org/10.2355/isijinternational.41.520
- T. Mega, K. Hasegawa, and H. Kawabe, : Ultra High-Strength Steel Sheets for Bodies, Reinforcement Parts, and Seat Frame Parts of Automobile-.Ultra High-Strength Steel Sheets Leading to Great Improvement in Crash-worthiness-, JFE Tech. Report, 4 (2004), 38
- L. Vaissiere, J. P. Laurent, and A. Reihardt : Development of pre-coated boron steel for applications on PSA peugeotcitroën and RENAULT bodies in white, Int. body eng. conf. & exhibition, Paris, French, (2002), 909
- L. G. Aranda, P. Ravier, and Y. Chstel : Hot stamping of quenchable steels : material data and process simulations, IDDRG, Conf. Proc., (2003), 155-164
- R. Kolleck, D. Steinhoefer, J. A. Feindt, and P. Bruneau : Manufacturing methods for safety and structural body parts for lightweight body design, IDDRG, Conf. Proc., (2004), 167-173
- H. S. Liu, Z. W. Xing, J. Bao, and B. Y. Song : Investigation of the hot-stamping process for advanced high-strength steel sheet by numerical simulation, J. Mater. Eng. & Perform, 19 (2010), 325-334 https://doi.org/10.1007/s11665-009-9510-y
- M. Geiger, M. Merklein, and C. Hoff : Basic investigations on the hot stamping steel 22MnB5, Adv. Mater. Res., 6 (2005), 795-804
- Kolleck. R., Veit. R., Merklein. M., Lechler. J., and Geiger. M. : Investigation on induction heating for hot stamping of boron alloyed steels, CIRP Annals-Manufacturing Technology, 58 (2009), 275-278 https://doi.org/10.1016/j.cirp.2009.03.090
- H. Karbasian and AE. Tekkaya : A review on hot stamping, 210, J. Mater. Process. Technol., 210 (2010), 2103-2118 https://doi.org/10.1016/j.jmatprotec.2010.07.019
- Francesca Borsetto, Andrea Ghiotti, Stefania Bruschi : Investigation of the High Strength Steel Al-Si Coating during Hot Stamping, Operations, Key Engineering Materials, 410-411 (2009), 289-296 https://doi.org/10.4028/www.scientific.net/KEM.410-411.289
- W. Ehling, L. Cretteur, A. Pic, R. Vierstraete, and Q. Yin : Development of a Laser Decoating Process for Fully Functional Al-Si Coated Press Hardened Steel Laser Welded Blank Solutions, 5th Int. WLT, Conf. Proc. (2009), 409
- Vierstraete, R. Ehling, W. Pinard, F. Cretteur, L. Pic, A. Yin, Q : Laser ablation for hardening laser welded steel blanks, Industrial Laser Solutions for Manufacturing, 25 (2010), 2-6
- Byung Hun Jung, Jong Pan Kong, Chung Yun Kang : Effect of hot-stamping Heat Treatment on Microstructure and Hardness in TWB Laser Joints of Al-Si coated Boron Steel and Zn-Coated DP Steel, Korean J. met. mater., 50-3 (2012), 224-232
- Y. Kim, K. Y. Park, B. Y. Lee : A Study on Laser Weldability of Al-Si Coated 22MnB5 Steel for TWB Hot Stamping, KWJS, 31 (2013), 32 (in Korean) https://doi.org/10.5781/KWJS.2013.31.2.30
- M. Potesser, T. Schoeber H, Antrekowisch and, J Brucker : The Characterization of The Inter-metallic Fe-Al Layer of Steel-Aluminum weldings, TMS The Minerals, Metals & Materials society, (2006), 167-176
- D. K. MUKHOPADHYAY : Structural Elolutionin Mechanically Alloyed AI-Fe Powders, Metallurgical and Materials transactions A, 26A (1994), 1939-1959
- Y. G. An, C. Y Kang, Y. S. Kim, C. H. Kim: Microstructures and Hardness of DISK Laser Welds in Al-Si Coated Boron Steel and Zn Coated DP Steel, KWJS, 29 (2011), 93-94 (in Korean) https://doi.org/10.5781/KWJS.2011.29.1.090
Cited by
- The Study on Weldability of Boron Steel and Hot-Stamped Steel by Using Laser Heat Source (I) - Laser Weldability of Al-Si Coated Boron Steel Used for Hot Stamping Process - vol.38, pp.12, 2014, https://doi.org/10.3795/KSME-A.2014.38.12.1367
- Effect of keyhole mode on weld shape and mechanical properties of thin sheets of Al-Si coated 22MnB5 steel vol.30, pp.4, 2018, https://doi.org/10.2351/1.5052155