참고문헌
- Amini, H. and Steen, S., 2011. Shaft loads on azimuth propulsors in oblique flow and waves. International Journal of Maritime Engineering, 153, Part A1, pp9-22.
- Bal, S., Akyildiz, H. and Guner, M., 2006. Preliminary results of a numerical method for podded propulsors. In Proceedings of 2nd T-POD Conference. University of Brest, France 3-5 October 2006.
- Carlton, J.S., 2007. Marine propeller and propulsion. 2nd ed. Oxford: Butterworth-Heinemann.
- Carlton, J.S., 2008. Podded propulsors: some results of recent research and full scale experience. Journal of Marine Engineering and Technology, 11, pp.1-14.
- Ghassemi, H. and Ghadimi, P., 2008. Computational hydrodynamic analysis of the propeller rudder and the AZIPOD systems. Journal of Ocean Engineering, 35(1), pp.117-130. https://doi.org/10.1016/j.oceaneng.2007.07.008
- Islam, M.F., Veitch, B. and Liu, P., 2007. Experimental research on marine podded propulsors. Journal of Naval Architecture and Marine Engineering, 4(2), pp.57-71.
- ITTC., 2005. The specialist committee on azimuthing podded propulsion. Final report and recommendations to the 24th ITTC. In Proceedings of the 24th ITTC, 2, pp.543-600, Edinburgh, UK, 2005.
- ITTC., 2008. The specialist committee on azimuthing podded propulsion. Final report and recommendations to the 25th ITTC. In Proceedings of the 25th ITTC, 2, pp.563-603, Fukuoka, Japan, 2008.
- Kinnas, S.A, 2006. Prediction of performance and design of propulsors-recent advances and applications. In Proceedings of 2nd T-POD Conference. University of Brest, France 3-5 October 2006.
- Koushan, K. and Krasilnikov, V.I., 2008. Experimental and numerical investigation of an open thruster in oblique flow conditions. In Proceedings of the 27th Symposium on Naval Hydrodynamics. Seoul, Korea 5-10 October 2008.
- Kulczyk, J., Skraburski, L. and Zawislak, M., 2007. Analysis of screw propeller 4119 using the fluent system. Archives of Civil and Mechanical Engineering, 7(4), pp.129-138. https://doi.org/10.1016/S1644-9665(12)60231-3
- Liu, P., 2006. The design of a podded propeller base model geometry and prediction of its hydrodynamics. Report, Institute for Ocean Technology, National Research Council Canada (IOT-NRC), Report no. TR-2006-16.
- Liu, P., Islam, M. and Veitch, B., 2009. Unsteady hydromechanics of a steering podded propeller unit. Journal of Ocean Engineering, 36(12-13), pp.1003-1014. https://doi.org/10.1016/j.oceaneng.2009.05.012
- Reichel, M., 2007. Manoeuvring forces on azimuthing podded propulsor model. Journal of Polish Maritime Research, 14(2), pp.3-8.
- Sanchez-Caja, A., Rautaheimo, P. and Siikonen, T., 1999. Computation of the incompressible viscous flow around a tractor thruster using a sliding-mesh technique. In Proceedings of 7th International Conference on Numerical Ship Hydrodynamics. France 1999.
- Seo, J.H., Seol, D.M., Lee, J.H. and Rhee, S.H., 2010. Flexible CFD meshing strategy for prediction of ship resistance and propulsion performance. International Journal of Naval Architecture and Ocean Engineering, 2(3), pp.139-145. https://doi.org/10.3744/JNAOE.2010.2.3.139
- Szantyr, J.A., 2001. Experimental measurements of the hydrodynamic characteristics of the pod propulsor models. Journal of Polish Maritime Research, 8(4), pp.3-7.
- Wilcox, D.C., 1998. Turbulence modeling for CFD. 2nd ed. California: DCW Industries, Inc.
피인용 문헌
- Numerical Prediction of Hydromechanical Behaviour of Controllable Pitch Propeller vol.2014, pp.1542-3034, 2014, https://doi.org/10.1155/2014/180725
- Time-Accurate Analysis of the Viscous Flow Around Puller Podded Drive Using Sliding Mesh Method vol.137, pp.1, 2014, https://doi.org/10.1115/1.4027143