Journal of Powder Materials (한국분말재료학회지)

The Korean Powder Metallurgy & Materials Institute (한국분말재료학회 (*구 분말야금학회))
권호 표지
DOI QR코드

DOI QR Code

Sintering of Nd-Fe-B Magnets from Dy Coated Powder

  • Kim, Jin Woo (Department of Materials Science and Engineering, Hanyang University) ;
  • Kim, Young Do (Department of Materials Science and Engineering, Hanyang University)
  • Received : 2013.06.03
  • Accepted : 2013.06.24
  • Published : 2013.06.28
Download PDF
⟨ Previous Next ⟩

Abstract

High-coercive (Nd,Dy)-Fe-B magnets were fabricated via dysprosium coating on Nd-Fe-B powder. The sputtering coating process of Nd-Fe-B powder yielded samples with densities greater than 98%. $(Nd,Dy)_2Fe_{14}B$ phases may have effectively penetrated into the boundaries between neighboring $Nd_2Fe_{14}B$ grains during the sputtering coating process, thereby forming a $(Nd,Dy)_2Fe_{14}B$ phase at the grain boundary. The maximum thickness of the Dy shell was approximately 70 nm. The maximum coercivity of the Dy sputter coated samples(sintered samples) increased from 1162.42 to 2020.70 kA/m. The microstructures of the $(Nd,Dy)_2Fe_{14}B$ phases were effectively controlled, resulting in improved magnetic properties. The increase in coercivity of the Nd-Fe-B sintered magnet is discussed from a microstructural point of view.

Keywords

References

  1. M. Sagawa, S. Fujimura, N. Togawa, H. Yamamoto and Y. Matsuura: J. Appl. Phys., 55 (1984) 2083. https://doi.org/10.1063/1.333572
  2. H. J. Wang, Z. H. Guo, A. H. Li, X. M. Li and W. Li: J. Magn. Magn. Mater., 303 (2006) e392. https://doi.org/10.1016/j.jmmm.2006.01.169
  3. M. Soderznik, K. Z. Rozman, S.Kobe and P. McGuiness: Intermetallics., 23 (2012) 158. https://doi.org/10.1016/j.intermet.2011.11.014
  4. W. F. Li, T. Ohkubo, K. Hono and M. Sagawa: J. Magn. Mater., 321 (2009) 1100. https://doi.org/10.1016/j.jmmm.2008.10.032
  5. I. D. Kosobudskii, V. P. Sevostyanov and M. V. Kuznetsov: Inorg. Mater., 36 (6) (2000) 584. https://doi.org/10.1007/BF02757958
  6. W. Q. Liu, H. Sun, X. F. Yi, X. C. Liu, D. T. Zhang, M. Yue and J. X. Zhang: J. Alloys Compd., 501 (2010) 67. https://doi.org/10.1016/j.jallcom.2010.04.030
  7. K. Hirota, H. Nakamura, T. Minowa and M. Honshima: IEEE Trans. Magn., 42 (10) (2006). 2909. https://doi.org/10.1109/TMAG.2006.879906
  8. C. H. de Groot, K. H. J. Buschow and F. R. de Boer: J. Appl. Phys., 83 (1998) 388. https://doi.org/10.1063/1.366734
  9. Gaolin Yan, P. J. McGuiness, J. P. G. Farr and I. R. Harris: J. Alloys Compd., 491 (2010) L20. https://doi.org/10.1016/j.jallcom.2009.10.202
  10. Fang Xu, Lanting Zhang, Xianping Dong, Qiongzhen Liu and Matahiro Komuro: Scr. Mater., 64 (2011) 1137. https://doi.org/10.1016/j.scriptamat.2011.03.011
  11. K. Raviprasad, M. Funakoshi and d M. Umemoto: J. Appl. Phys., 83(2) (1998) 921. https://doi.org/10.1063/1.366779

Cited by

  1. Recovery of Valuable Metals from Acoustic Magnet Swarf Slurry vol.53, pp.2267-1242, 2018, https://doi.org/10.1051/e3sconf/20185304015