Journal of the Korean Society for Precision Engineering (한국정밀공학회지)

Korean Society for Precision Engineering (한국정밀공학회)
권호 표지
DOI QR코드

DOI QR Code

Development of Condition Monitoring System for Reduction Unit of High-speed Rail

고속열차용 감속기 모니터링 시스템 개발

  • 이동형 (한국철도기술연구원 고속철도연구본부) ;
  • 권석진 (한국철도기술연구원 고속철도연구본부) ;
  • 박병수 (케이티엠엔지니어링(주) 연구소) ;
  • 조덕영 ((주)솔지 연구소) ;
  • 김진우 (한국철도공사 기술연구처)
  • Received : 2013.05.20
  • Accepted : 2013.06.20
  • Published : 2013.07.01
Download PDF
⟨ Previous Next ⟩

Abstract

This paper presents the development of a condition monitoring system that monitors the operating conditions of a reduction unit, such as the bearing temperature, gearbox vibration, and gear oil deterioration, and notifies the operator of potential problems or abnormal conditions. A series of field tests on high-speed rail and conventional lines was performed to identify the characteristics of temperature rise and vibration levels on the reduction unit during operation. The monitoring system was designed based on the proper sensor selection, measurement method, and signal analysis to optimize the interface with the operating system of high-speed trains. Application of this monitoring system to high-speed trains will play an important role in their proper maintenance and safe operation.

Keywords

References

  1. Muller, L. and Sunder, R., "Onboard monitoring and diagnostics of bogies in high-speed trains," http://www.istec-gmbh.de/sites/default/files/Onboard% 20monitoring%20and%20diagnostics%20of%20bogi es%20in%20high-speed%20trains.pdf
  2. Kure, G. and Schmiechen, R., "Solutions for railway bogie condition monitoring," Evolution magazine, No. 1, pp. 25-27, 2010.
  3. Knor-Bremse Group, "COMORAN - Condition Monitoring for Railway Applications," 2010.
  4. Jung, D., Lee, Y., and Kim, E., "A study of maintenance measures of the KTX decelerator," Proc. of the 2009 Spring Conference of the Korean Society for Railway, pp. 1191-1197, 2009.
  5. Rail Accident Investigation Branch, "Passenger Train Derailment near East Langton," 2010.
  6. JSME, "Design for Gear Strength," Jpn. Soc. Mech. Eng., 1991.
  7. Nam, Y., Kim, H., Yoo, N., and Lee, J., "Development of a Wind Turbine Monitoring System using LabVIEW," J. Korean Soc. Precis. Eng., Vol. 20, No. 5, pp. 92-98, 2003.
  8. Gec Alsthom Transport S. A., "Mounting Technical Specification: Motor Reduction unit and axle gear reduction unit," ST13-223-101, 1996.

Cited by

  1. Characteristics of Vibration Condition Indicator with Gear Tooth Damage vol.32, pp.7, 2015, https://doi.org/10.7736/KSPE.2015.32.7.611
  2. Experimental Investigation on Torsional Analysis and Fracture of Tripod Shaft for High-speed Train vol.40, pp.11, 2016, https://doi.org/10.3795/KSME-A.2016.40.11.979
  3. Deviation based fault detection method for shackles under variable loading vol.32, pp.2, 2018, https://doi.org/10.1007/s12206-018-0124-2
  4. Anomaly detection of tripod shafts using modified Mahalanobis distance vol.32, pp.6, 2018, https://doi.org/10.1007/s12206-018-0504-2