Journal of the Korean Institute of Illuminating and Electrical Installation Engineers (조명전기설비학회논문지)

The Korean Institute of IIIuminating and Electrical Installation Engineers (한국조명전기설비학회)
권호 표지
DOI QR코드

DOI QR Code

Development of Technology for Setting Rolling Speed of Finishing Rolling Process in Hot Strip Mill

열연 마무리 압연공정 압연롤 회전속도 설정 기술 개발

  • 홍성철 (영남대학교 전기공학과) ;
  • 이해영 (영남대학교 전기공학과)
  • Received : 2013.08.05
  • Accepted : 2013.09.17
  • Published : 2013.11.30
Download PDF
⟨ Previous Next ⟩

Abstract

Rolling speed, roll gap, and cooling pattern in hot strip finishing mill process should be determined before inserting strip into roll. Such parameters are initially calculated by a mathematical set-up model. The technique to find adequate roll speed via a mathematical model has inherently limit because required working conditions are various and rolling process is nonlinear. To improve the accuracy of initial rolling speed for a finishing mill, this paper suggests a correction technology for initial rolling speed. The proposed method was implemented in hot strip mill process. As the results, the magnitude of width error in strip head-end part caused by excessive strip tension was decreased remarkably.

Keywords

References

  1. Morio Saitoh et al., "Development of high-accuracy control system for hot strip mill", NKK Technical review, No.61, 1991, pp. 10-17.
  2. Minoru Tanaka et al., "Decoupled automatic gauge control for universal rolling mills", NIPPON STEEL Technical report, No.27, Oct., 1985, pp. 51-62.
  3. B. Hum, H. W. Colquboun, J. G. Lenard, "Measurements of friction during hot rolling of aluminum strips", Journal of Materials Processing Technology, 60, 1996, pp. 331-338. https://doi.org/10.1016/0924-0136(96)02350-3
  4. Jarl, M., Friction and forward slip in hot rolling, Scandinavian Journal of Metallurgy, 17, 1988, pp. 2-7.
  5. Kwak, W.J., Y.H. Kim, J.H. Lee and S.M. Hwang., A Precision On-line Model for the rediction of Roll Force and Roll Power in Hot-Strip Rolling. Metallurgical and Materials Transactions, 33A, 2002, pp.3255-3272.
  6. Liu, Y.J., A.K. Tieu, D.D. Wang and W.Y.D. Yuen., Friction measurement in cold rolling, Journal of Materials processing Technology, 111, 2001, pp. 142-145. https://doi.org/10.1016/S0924-0136(01)00541-6
  7. Piispanen, V., Forward Slip in the Hot Rolling of Sheet. Scandinavian Journal of Metallurgy, 7, 1978, pp. 88-90.
  8. Moon, Y. H., Jo, I. S. and Van Tyne, C. J., " Control Scheme Using Forward Slip for a Multi-stand Hot Strip Rolling Mill," KSME International Journal, Vol. 18, No. 6, pp. 972-978, 2004.