DOI QR코드

DOI QR Code

Dynamic Characteristics of CFRP Structure Member According to Change the Stacking Angle and Shape

적층각 및 형상 변화에 따른 CFRP 구조부재의 동적 특성

  • Yeo, In-Goo (Department of Advanced Parts and Material Engineering, Graduate School, Chosun Univ.) ;
  • Choi, Ju-Ho (Department of Advanced Parts and Material Engineering, Graduate School, Chosun Univ.) ;
  • Yang, In-Young (Department of Mechanical Design Engineering, Chosun Univ.)
  • Received : 2013.03.07
  • Accepted : 2013.04.17
  • Published : 2013.06.15

Abstract

Carbon fiber reinforced plastic (CFRP) has many desirable qualities, including being lightweight and very strong. These characteristics have led to its use in applications ranging from small consumer products to vehicles. Circular and square CFRP members were fabricated using 8ply unidirectional prepreg sheets stacked at different angles ($[+15^{\circ}/-15^{\circ}]_4$, $[+45^{\circ}/-45^{\circ}]_4$ and $[90]_8$, where $0^{\circ}$ coincides with the axis of the member). Based on the collapse characteristics of a CFRP circular member, the collapse characteristics and energy absorption capability were analyzed. Impact collapse tests were carried out for each section member. In this study, the impact energies at crossheads speeds of 5.52 m/s, 5.14 m/s and 4.57 m/s were 611.52 J, 529.2 J and 419.44 J (circular member) 2.16 m/s, 1.85 m/s and 1.67 m/s are 372.4 J, 274.4 J and 223.44 J (square member). The purpose is to experimentally examine the absorption behavior and evaluation the strength in relation to changes in the stacking configuration when the CFRP circular members with different stacking configurations were exposed to various impact velocities. In addition, the dynamic characteristics were considered.

Keywords

References

  1. Lee, K. S., 2008, Evaluation of Safety Performance on Lightweight Vehicle Structural Members for the use of Impact Absorption, A Thesis for a Doctorate, Chosun University, Republic of Korea.
  2. Kim, Y. N., 2002, Axial Collapse Characteristics of CFRP Composite Thin-wall Structures for Lightweight of Vehicles, A Thesis for a Doctorate, Chosun University, Republic of Korea.
  3. Farley, G. L., Jones., R. M., 1992, "Crushing Characteristics of Continuous Fiber-Reinforced Composite Tubes," Journal of composite Materials, 26 37-50. https://doi.org/10.1177/002199839202600103
  4. Kim, Y. N., Hwang, J. J., Baek, K. Y., Cha, C.S., Yang, I. Y., 2003, Impact Collapse Characteristics of CF/Epoxy Composite Tubes for Light-Weights, KSME International Journal, 17 48-56.
  5. Avalle, M., Belingardi, G., 1997, Experimental Evaluation of the Strain Field History During Plastic Progressive Folding of Aluminum Circular Tubes, Int. J. Mech. Sci., 39 575-583. https://doi.org/10.1016/S0020-7403(96)00063-X
  6. Cha, C. S., Kang, J. Y., Yang, I. Y., 2001, Axial Impact Collapse Analysis of Spot Welded Hat shaped Section member, KSME International Journal, 15 180-191.
  7. Cha, C. S., Kang, J. Y., Yang, I. Y., 1999, A Theoretical Analysis for the Quasi-Static Axial Crushing of Top-Hat and Double-Hat Thin-Walled Sections, Int. J. Mech. Sci, 41 209-233. https://doi.org/10.1016/S0020-7403(98)00048-4
  8. Singace, A. A., 1999, Axial Crushing Analysis of Tubes Deforming in the Multi-Mode, Int. J. Mech. Sci, Vol. 41, pp. 865-890 Int. J. Mech. Sci, 41 209-233. https://doi.org/10.1016/S0020-7403(98)00052-6
  9. Farley, G. L., Jones, R. M., 1991, Prediction of Energy-Absorption Capability of Composite tubes, Journal of Composite Materials 26 388-404.
  10. Mahmood, H. F., paluzny, A, 1981, Design of Thin Walled Columns for Crash Energy Management-Their Strength and Model of Collapse, Proc, 4rd International Conference on Vehicle Structural Mechanics, Nov. 18-20, Detroit, 7-18.

Cited by

  1. A Study on Impact Collapse Modes of Composite Structural Members using Carbon Fiber Reinforced Plastics for Car Body Lightweight vol.29, pp.5, 2014, https://doi.org/10.14346/JKOSOS.2014.29.5.007
  2. 탄소복합재 부품 파티션패널의 구조 강성/강도 신뢰성 평가에 관한 연구 vol.18, pp.10, 2019, https://doi.org/10.14775/ksmpe.2019.18.10.068