References
- 한국지반공학회 (2009). 구조물 기초 설계기준 해설, 구미서관, pp. 368
- American Petroleum Institute (2000), Recommended practice for planning, designing and constructing fixed offshore platforms - working stress design, API RP 2A-WSD, 21st Edition. 14p.
- Basu, D., Salgado, R., and Prezzi, M. (2009), A continum-based model for analysis of laterlly load piles in layered soils. Geotechnique, Vol. 59, No. 2, pp. 127-140. https://doi.org/10.1680/geot.2007.00011
- Bowels. J. E. (1992), Physical and geotechnical properties of soils, 2nd ed., McGraw-Hill, New York, pp. 578
- Broms, B .(1964a), The lateral resistance of piles in cohesive soils, J. Soil Mech Found. Div., ASCE, Vol. 90, No. SM2, pp. 27-63.
- Broms, B. (1964b), The lateral resistance of piles in cohesionless soils, J. Soil Mech Found. Div., ASCE, Vol. 90, No. SM2, pp. 123-156.
- Das. B. M. (2002), Principles of geotechnical engineering, 5th Edition, Brooks/Cole, KY USA. 729 p.
- Det Norske Veritas (1977), Rules for the design, construction, and inspection of offshore structures, Veritasveien 1, 1322 Hovik, Norway. pp. 275
- Dunnavant, T. W., and O'Neill, M. W. (1985), Performance, analysis, and interpretation of a lateral load test of a 72-inch-diameter bored pile in over-consolidated clay, Department of Civil Engineering, University of Houston University Park, Houston, Texas, Report No. UHCE 85-4, September, pp. 57.
- Hansen, J. B. (1961), The ultimate resistance of rigid piles against rransversal forces, Danish Geotechnical Intitute Bull. No. 12, pp. 5-9.
- Higgins, W., Martindale, H., Chakraborty, T., and Basu, D. (2010), Assessment of the P-Y method for laterally loaded pile in sand, Indian Geotechnical Conference. pp. 833-836
- Itasca Consulting Group, Inc(2009). FLAC 3D user's manual, Itasca, Minneapolis Minnesota USA. pp. 4-10.
- Kim, Y. H., Jung, S. S., Kim, J. H., Lee, Y. G. (2007), Effects of lateral pile rigidity of offshore drilled shafts by developing p-y curves in marine clay, Journal of Korean Geotechnical Society, KGS, Vol. 23, No. 6, pp. 37-51 (in Korean).
- Kim, T. S., Jung, S. S., Kim, Y. H. (2008), A study on the p-y curves by small-scale model tests, Journal of Korean Society of Civil Engineering, KSCE, Vol. 28, No. 1, pp.41-51 (in Korean).
- Lee, S. H., Kim, S. R., Lee, J. H., Jung, M. K. (2011), Evaluation of p-y curves of piles in soft deposits by 3-dimensional numerical analysis, Journal of Korean Geotechnical Society, KGS, Vol. 27, pp. 47-57 (in Korean).
- Matlock, H. (1970), Correlations for design of laterally loaded piles in soft clay, Proceedings, 2nd Offshore Technology Conference, Vol. I, pp. 577-594.
- McClelland, B., and Focht, J. A. (1958), Soil modulus for laterally loaded piles, Transactions, ASCE, Vol. 123, pp. 1049-1086.
- Mitchell, J. K. and Gardner, W. S. (1975), In Situ measurement of volume change characteristics, SOA report. In: Proceedings of the American Society of Civil Engineering (ASCE) Special Conference on the In Situ Measurement of Soil Properties., pp. 279-345.
- O'Neill, M. W., and Dunnavant, T. W. (1984), A Study of the effects of scale, velocity, and cyclic degradability on laterally loaded single piles in overconsolidated clay, Department of Civil Engineering, University of Houston-University Park, Houston, Texas, Report No. UHCE 84-7, pp. 368.
- Reese, L. C. Cox, W. R., and Koop. F. D. (1974), Analysis of laterally loaded piles in sand, Proceeding Offshore Technology Conference, Huston, TX, Paper No. OTC 2080, pp. 473-483.