참고문헌
- Lee, S. K., and Rhu, C. W., "Characteristics of surface roughness in the wire-cut electric discharge cutting conditions of aluminium alloy 2024", The Korean Society of Manufacturing Process Engineers, Vol. 11, No. 1, pp. 39-45, 2012.
- Chae, H. J., and Lee, S. Y., " Vibration Characteristics and Tension Control of a Wire in WEDM", Journal of the Korean Society of Precision Engineering, Vol. 18, No. 11, pp86-92, 2001.
- Tak, H. S., Ha, C. S., Kim, D. H., Lee, H. J., Lee, H. J., Kang, M. C., "Comparative study on dischage conditions in micro-hole electrical discharge machining of tugsten carbide (WC-Co) material", Trans. Nonferrous Met. Soc. China, Vol. 19, pp. 114-118, 2009. https://doi.org/10.1016/S1003-6326(10)60257-9
- Mahapatra, S. S., and Amar Patnaik, "Parametric Optimization of Wire Electrical Discharge Machining (WEDM) Process using Taguchi Method", J. of the Braz. Soc. of Mech. Sci. & Eng.(ABCM), Vol. 28, pp. 422-429, 2006. https://doi.org/10.1590/S1678-58782006000400006
- Park, S. J., Ahn, H. M, and Lee, K. S., "Fabrication of Micro Tool Electrode for Machining Micro Structures using Wire Electrical Discharge Grinding(WEDG)", The Korean Society of Manufacturing Technology Engineers, Vol. 14, No. 5, pp13-20, 2005.
- Kim, K. S., and Cho, M. S., "Tension Control of a Wire Cut Discharge Machine Using ER Brake", The Korean Society of Manufacturing Technology Engineers, Vol. 13, No. 5, pp. 24-29, 2004.
- Jung, J. W., Ko, S. H., Jeong, Y. H., Min, B. K., and Lee, S. J., "Real-time Gap Control for Micro-EDM : Application in a Microfactory", International Journal of Precision Engineering and Manufacturing, Vol. 9, No. 1, pp3-6, 2008.
- Kim, Y. H., "Photo Sensor", Dooyangsa, 2011.
- General Purpose Photointerrupter,http://www.datasheetcatalog.com/datasheets_pdf/G/P/1/S/GP1S50.shtml, 2013.
- Geared Stepper Motor,http://www.mclennan.co.uk/datasheets/european/geared/p542m48gearedsteppermotor.pdf, 2013.
- 11. Kim, J. H, Heo, J. Y, Kim, S. Y, Kang, M. C., and Lim, H. S., "Characteristic Evaluation of the Tension Control using Photo Interrupter in the WEDG Device for Micro EDM", Proc. of KSPE Fall conf., Vol. 2009, No. 10, pp. 193-194, 2009.
- Park, K.. Y., Jung, T. H., Bae, S. H., "Development of micro machine manufacturing technology using the ultra-precision electric discharge machining method", ulsan university, pp. 91-108, 2001.