한국기계가공학회지 (Journal of the Korean Society of Manufacturing Process Engineers)

  • 제12권2호
  • /
  • Pages.91-99
  • /
  • 2013
  • /
  • 1598-6721(pISSN)
  • /
  • 2288-0771(eISSN)
한국기계가공학회 (The Korean Society of Manufacturing Process Engineers)
권호 표지

소형 승용차용 카 크로스 빔의 알루미늄화를 위한 설계 및 해석

Design and Analysis to aluminize Car Cross Beam for Small Passenger Car

  • 발행 : 2013.04.30
⟨ 이전 논문 다음 논문 ⟩

초록

Car cross beam made by aluminium for new car is designed for the substitution of steel and it can be verified the performance by computer simulations. The parts of car cross beam are designed to replace steel parts according to their manufacturing processes. At the first stage, the weight of the aluminium car cross beam can be reduced to 75% by comparing with that of steel car cross beam. But NVH performance of the aluminium car cross beam becomes slightly insufficient as compared with that of steel car cross beam. Taguchi method is adopted to optimize the design variables affecting NVH characteristics of car cross beam. New car cross beam is designed at the second stage by using these analysis results. Weight reduction can be obtained to 31.7% by design modification and material change of car cross beam in comparison with the original steel one. NVH characteristics of aluminium car cross beam become on an equal level with the steel car cross beam. By side impact analysis results, new car cross beam has higher performance as compared with the steel car cross beam.

키워드

참고문헌

  1. Park, B., Lee, J., Kim, Y., and Han, S.,"A Study on a development of hybrid structure for application of cockpit module," Trans. KSAE, Vol. 10, No. 6, pp. 166-170, 2002.
  2. Ko, C, Park, J., Park, K. and Park, S., "Study on applying morphing technique for the automotive component analysis," Proc. of KSAE Fall Conf., pp. 1098-1104, 2006.
  3. Ruden, T. and Lenda, D.,"A case study of a die-cast magnesium structure supporting transmission shifter mechanisms and interfaced with other structural systems," SAE, 2004.
  4. Kim, S., Lee, J., Yoon, Y., and Cho, H., "Development of AZ31 Mg alloy wrought process route without protection gas," J. of Materials Processing Tech., Vol. 187-188, pp. 757-760, 2007. https://doi.org/10.1016/j.jmatprotec.2006.11.172
  5. Kim, B., Jung, S., Yoon, Y., Kim, H., and Kim, S.,"Effects of Mg content on age hardening of an extruded Al-Si-Mg-Mn alloy," Advanced Materials Research, Vol. 630, pp. 54-58, 2013.
  6. Chun, S. H. and Go, T. J., "Study on the dynamic stiffness variation of boring bar by Taguchi Method," Journal of the Korean Society of Manufacturing Process Engineers, Vol. 8, No. 3, pp. 98-104, 2009
  7. Eretec "MiniTab Realese 14, Korean version," Eretec, pp. 689-697, 2005