References
- Zhang, Z. T., and Lee, D., "Effects of process variables and material properties on the springback behavior of 2D-draw bending parts", Automotive Stamping Technology, SAE, pp.11-18, 1995.
- Geng, L. M., and Wagoner, R. H., "Role of plastic anisotropy and its evolution on springback", Int. J. Mech. Sci., Vol. 44, No. 1, pp.123-148, 2002. https://doi.org/10.1016/S0020-7403(01)00085-6
- Col, A.. "Investigation on process forming scatter origin", Proceedings of Sixth International ESAFORM Conference on Material Forming, 2003.
- Song, J. H., Huh, S. H., Kim, S. H., and Park, S. H., "Springback reduction in stamping of front side member with a response surface method", Proceedings of the 6th International Conference NUMISHEET 2005, pp.303-308, 2005.
- Bae, G. H., Song, J. H., Huh, S. H., Kim, S. H., and Park, S. H., "Simulation-based prediction model of the draw-bead restraining force and its application to sheet metal forming process", J. of Materials Processing Technology, Vol. 187-188, pp.123-127, 2007. https://doi.org/10.1016/j.jmatprotec.2006.11.059
- Stoughton T. B., "Model of drawbead forces in sheet metal forming", Proceedings of the 15th Biennial Congress IDDRG, pp.205-3215, 1988.
- Liu, G., Lin, Z., and Bao, Y., "Optimization design of drawbead in drawing tools of autobody cover panel", J. Eng. Mater. Technol., Vol. 124, pp.278-285, 2002. https://doi.org/10.1115/1.1448523
- Chen, P.. and Koc, M, "Simulation of springback variation in forming of advanced high strength steels", Journal of Materials Processing Technology, Vol. 190, pp. 189-198, 2007. https://doi.org/10.1016/j.jmatprotec.2007.02.046
- Souza, T.. and Rolfe, B, "Multivariate modeling of variability in sheet metal forming", Journal of Materials Processing Technology, Vol. 203, pp. 1-12, 2008. https://doi.org/10.1016/j.jmatprotec.2007.09.075
- Kim, K. M., Yin, J. J., and Suh, Y. S., "Process optimization of Sheet Metal Forming Using Operating Window," Proceedings of the ASME IDETC/CIE 2009, San Diego, California, 2009.
- Park, J., "R&D Creative Innovation : Design for Six Sigma and TRIZ", Proceedings of TRIZ Conference, Seoul, pp. 1-22, 2011.
- Zhang, W., and Shivpuri, R., "Probabilistic design of aluminum sheet drawing for reduced risk of wrinkling and fracture," Reliability Engineering and System Safety, Vol. 94, pp. 152-161, 2009. https://doi.org/10.1016/j.ress.2008.02.024
- Strano, M., "Robustness Evaluation and Tolerance Prediction for a Stamping Process with Springback Calculation by the FEM," Numisheet 2005 pp. 266-271, 2005.
- Kim, K. M. and Yin, J. J., "Optimization of sheet metal forming process by using decision-making theory," Journal of the Korean Society of Manufacturing Process Engineers, Vol. 11, No. 2, pp. 125-136, 2012.
- Donglai, W., Zhenshan, C., and Jun, C., "Optimization and tolerance prediction of sheet metal forming process using response surface model," Computational Materials Science, Vol. 42, pp. 228-223, 2008. https://doi.org/10.1016/j.commatsci.2007.07.014
- Buranathiti, T., Cao, J., Xia, Z. C,. and Chen, W., "Probabilistic Design in a Sheet Metal Stamping Process under Failure Analysis," Numisheet 2005, pp. 867-872, 2005.
- Li, Y. Q., Cui, Z. S., Ruan, X. Y., and Zhang, D. J., "Application of Six Sigma Robust Optimization in Sheet Metal Forming," Numisheet 2005, pp. 819-824, 2005.
- Mullerschon, H., Roux, W., Lorenz, D., and Roll, K., "Stochastic Analysis of Uncertainties for Metal Forming Processes with LS-OPT," Numisheet 2008, pp. 819-828, 2008.
- Phadke, M. S., Quality Engineering using Robust Design, Prentice Hall, 1989.