Journal of the Korean Society of Manufacturing Process Engineers (한국기계가공학회지)

The Korean Society of Manufacturing Process Engineers (한국기계가공학회)
권호 표지

A Study on Characteristics of Cutting by Cutting Conditions in Titanium Machining

티타늄 가공의 절삭조건에 따른 가공특성에 관한 연구

  • Kim, Gee-Hah (Dongbusan Campus of Korea Polytechnic Dept. of Computer Applied Machinery)
  • Published : 2013.02.28
⟨ Previous Next ⟩

Abstract

Titanium used in industry has been widely applied for aerospace engine, structures and spacecraft exterior, etc. because the titanium is higher in strength compared to the steel and light in weight compared to the steel. This study is to investigate the effect of cutting depth and cutting time on the spindle speed and feed rate of vertical machining center as a parameter to find the rough cutting time and cutting depth in the medium speed cutting machining of the titanium alloy. It is found that the cutting machining heat are increased as the cutting depth, feed rate, cutting time and spindle speed are raised.

Keywords

References

  1. S. J. Lee, H. M. Park, S. T. Lee and M. K. Ha, "Temperature Measurement Characteristics of High-speed Machining," 2006 Korean Society of Manufacturing Process Engineers Annual Conference and Exhibition, pp. 263-268, 2006.
  2. N. Y. Kim, J. B. Ko, and D. J. Lee, "A Study on the Machining Characteristics of Ti-6Al-4V Alloy," Journal of the Korean Society of Precision Engineering, Vol. 20, No. 4, pp. 20-28, 2003.
  3. N. Y. Kim, J. B. Ko, and D. J. Lee, "A Study on the Tool Wear and Cutting Characteristics in the Machining of Ti-6A1-4V Using Tungsten Carbide Tool," Journal of the Korean Society of Machine Tool Engineers, Vol. 11, No. 2, pp. 9-16, 2002.