참고문헌
- Kang, J. H., "Environmentally Conscious Machining Technology and Machine-tool," Journal of the Korean Society for Precision Engineering, Vol. 9, No. 1, pp. 9-17, 2000.
- Lee, K. H. and Kim, J. Y., "Overview and Future Direction of Cleaner Production System," Journal of the Korean Society for Precision Engineering, Vol. 20, No. 8, pp. 12-16, 2003.
- Hwang, J., Chung, E. S. and Hwang, D. C., "A study on the Environmentally Conscious Machining," Journal of the Korean Society for Precision Engineering, Vol. 20, No. 2, pp. 50-57, 2003.
- Lee, J. H., Lee, S. J., Lee, S. W. and Choi, H. J., "Characteristics of Environment-friendly Semi-dry Turning," Journal of the Korean Society for Precision Engineering, Vol. 19, No. 10, pp. 221-226, 2002.
- Dhar, N. R., Islam, M. W., Islam, S. and Mithu, M. A. H., "The influence of minimum quantity of lubrication on cutting temperature, chip and dimensional accuracy in turning AISI-1040 steel," Journal of Materials Processing Technology, Vol. 171, No. 1, pp. 93-99, 2006. https://doi.org/10.1016/j.jmatprotec.2005.06.047
- Hwang, Y. K. and Lee, C. M., "Surface roughness and cutting force prediction in MQL and wet turning process of AISI 1045 using design of experiments," Journal of Mechanical Science and Technology, Vol. 24, No. 8, pp. 1669-1677, 2010. https://doi.org/10.1007/s12206-010-0522-1
- Rahman, M., Senthil Kumar, A. and Salam, M. U., "Experimental evaluation on the effect of minimal quantities of lubricant in milling," International Journal of Machine Tool & Manufacture, Vol. 42, No. 5, pp. 539-547, 2002. https://doi.org/10.1016/S0890-6955(01)00160-2
- Hwang, Y. K., Lee, C. M. and Park, S. H., "Evaluation of Machinability According to the Changes in Machine Tools and Cooling Lubrication Environments and Optimization of Cutting Conditions Using Taguchi Method," Internal Journal of Precision Engineering and Manufacturing, Vol. 10, No. 3, pp. 65-73, 2009. https://doi.org/10.1007/s12541-009-0049-5
- Hwang, Y. K., Chung, W. J., Jung, J. Y. and Lee, C. M., "A Study on the Improvement of Cutting Force and Surface Roughness in MQL turning," Transactions of the Korean Society of Machine Tool Engineers, Vol. 15, No. 4, pp. 83-91, 2006.
- Hwang, Y. K., Chung, W. J. and Lee, C. M., "Experimental Study of Cutting Force and Surface Roughness Prediction in MQL Turning of Al 6061," Journal of the Korean Society for Precision Engineering, Vol. 25, No. 6, pp. 159-167, 2008.
- Kim, D. H., Choi, J. Y. and Lee, C. M., "A Basic Study on the Surface Roughness in Turning Process Considering Taper Angle Variation," Journal of the Korean Society of Manufacturing Process Engineers, Vol. 10, No. 6, pp. 16-21, 2011.
- Choi, C. H., Kim, D. H. and Lee, C. M., "A Study on Cutting Characteristic of Tapered Groove in Turning," Journal of the Korean Society of Manufacturing Process Engineers, Vol. 10, No. 6, pp. 27-32, 2011.
- Eretec, "MINITAB Realese 14," Eretec Inc, pp. 574-609, 2005.
- Cho, I. H., Lee, N. H., Chang, S. W., An, S. W., Yonn, Y. H. and Zoh, K. Duk., "Analysis of Characteristics and Optimization of Photo-degradation condition of Reactive Orange 16 Using a Box-Behnken Method," Journal of Korean Society of Environmental Engineers, Vol. 28, No, 9, pp. 917-925, 2006.