참고문헌
- G. F. Engen, C. A. Hoer, "Thru-Reflect-Line: an improved technique for calibrating the dual six-port automatic network analyzer", IEEE Trans. Microwave Theory and Tech., vol. MTT-27, no. 12, pp. 987-993, Dec. 1979.
- C. A. Hoer, "Choosing line lengths for calibrating network analyzers", IEEE Trans. Microwave Theory and Tech., vol. MTT-31, no. 1, pp. 76-78, Jan. 1983.
- C. A. Hoer, G. F. Engen, "Accuracy assessment for the dual six-port ANA: extension to nonmating connectors", IEEE Trans. Instrum. Meas., vol. IM-36, no. 2, pp. 524-529, Jun. 1987. https://doi.org/10.1109/TIM.1987.6312732
- N. M. Ridler, "Choosing line lengths for calibrating waveguide vector network analysers at millimetre and sub-millimetre waveguides", NPL Report TQE 5, Mar.
- 여준호, 김채영, 최현철, "구형도파관의 벽면거칠기가 고려된 감쇄상수 계산", 대한전자공학회, 대한전자공학회 학술대회 논문집, 제16호 1호, pp. 84-87, 1993년.
- 여준호, 김채영, "벽면거칠기가 고려된 구형도파관의 감쇄특성 분석", 대한전자공학회, 전자공학회논문지, A편, 제31권 제11호, pp. 1470-1478, 1994년.
- R. B. Dybdal, L. Jr. Peters, and W. H. Peake, "Rectangular waveguides with impedance walls", IEEE Trans. Microwave Theory and Tech., vol. MTT-19, no. 1, pp. 2-8, Jan. 1971.
- D. A. Hill, "Reflection coefficient of a waveguide with slightly uneven walls", IEEE Trans. Microwave Theory and Tech., vol. MTT-37, no. 1, pp. 244- 252, Jan. 1989.
- C. D. Chen, Ching-Kuang C. Tzuang, and S. T. Peng, "Full-wave analysis of a lossy rectangular waveguide containing rough inner surfaces", Microwave and Guided Wave Letters, IEEE, vol. 2, no. 5, pp. 180-181, May 1992. https://doi.org/10.1109/75.134347
- F. Ladouceur, J. D. Love, and T. J. Senden, "Effect of side wall roughness in buried channel waveguides", Optoelectronics, IEE Proc., vol. 141, no. 4, pp. 242-248, Aug. 1994. https://doi.org/10.1049/ip-opt:19941085
- A. Collaro, G. Franceschetti, M. Migliaccio, and Daniele Riccio, "Gaussian rough surfaces and Kirchhoff approximation", IEEE Trans. Microwave Theory and Tech., vol. MTT-47, no. 2, pp. 392- 398, Feb. 1999.
- Rui Wang, Wanzhao Cui, "A rapid estimation of the conductor loss in the rectangular waveguide with rough surface", 2011 IEEE 4th Inter. Symp. on MAPE, pp. 498-800, 2011.
- P. Lagasse, J. Van Bladel, "Square and rectangular waveguides with rounded corners", IEEE Trans. Microwave Theory and Tech., vol. MTT-20, no. 5, pp. 331-337, 1972.
- E. J. Griffin, T. E. Hodgetts, "Effect on return loss of dimensional tolerances of the aperture of rectangular waveguide", Electronics Letters, no. 20, pp. 942-943, Sep. 1985.
- A. Mahanfar, S. Bila, M. Aubourg, and S. Verdeyme, "Analysis of rectangular waveguides with curved corners using superquadric functions", 2002 3rd Inter. Conf. on MMWT, pp. 837-839, 2002.
- E. Degirmenci, F. Surre, S. Philippe, R. Maldonado- Basilio, and P. Landais, "Improved bend waveguide design for terahertz transmission", IEEE Trans. on Terahertz Sci. and Tech., vol. 2, no. 1, pp. 137- 143, 2012. https://doi.org/10.1109/TTHZ.2011.2177170
- G. Oleson, A. Denning, "Millimeter-wave vector analysis calibration and measurement problems caus- ed by common waveguide irregularities", OML Inc., Morgan Hill, CA, Applicat. Notes, 2005. [Online] Available: http://www.omlinc.com/download/ mwvacamp.pdf
- A. R. Kerr, E. Wollack, and N. Horner, "Waveguide flanges for ALMA instrumentation", Nat. Radio Astron. Observatory, Charlottesville, VA, ALMA Memo 278, Nov. 1999. [Online] Available: http:// www.alma. nrao.edu/memos
- A. R. Kerr, L. Kozul, and A. A. Marshall, "Recommendations for flat and anti-cocking waveguide flanges", Electron. Div., Nat. Radio Astron. Observatory, Charlottesville, VA, Tech. Note 192, 2003. [Online] Available: http://www.gb.nrao.edu/electronics/ edtn
- D. F. Williams, "500 GHz-750 GHz Rectan- gularwaveguide vector-network-analyzer calibrations", IEEE Trans.on Terahertz Sci. and Tech., vol. 1, no. 2, pp. 364-377, 2011. https://doi.org/10.1109/TTHZ.2011.2127370
- W. Sigg, J. Simon, "Reflectometer calibration using load, short and offset shorts with unknown phase", Electron. Lett., vol. 27, no. 18, pp. 1650-1651, Aug. 1991. https://doi.org/10.1049/el:19911031
- IEEE Standard for rectangular waveguides and flanges for rectangular waveguides for use at millimeter and sub-millimeter wavelengths. [Online] Available: http://grouper.ieee.org/groups/1785/index. html
- S. A. Chahine, B. Huyart, and J. Achkar, "Reflectometer calibration without an open circuit", IEEE Trans. Instrum. Meas., vol. IM-52, no. 5, pp. 1488- 1493, Oct. 2003.
- C. Vicente, H. L. Hartnagel, "Passive-intermodulation analysis between rough rectangular waveguide flanges", IEEE Trans. Microwave Theory and Tech., vol. MTT-53, no. 8, pp. 2515-2525, 2005.
- A. Fung et al., "Two-port vector network analyzer measurements in the 218-344 and 356-500 GHz frequency bands", IEEE Trans. Microwave Theory and Tech., vol. MTT-54, no. 12, pp. 4507-4512, Dec. 2006.
- P. L. Kirby, D. Pukala, H. Manohara, I. Mehdi, and J. Papapolymerou, "Characterization of micromachined silicon rectangular waveguide at 400 GHz", Microwave and Wireless Components Letters, IEEE, vol. 16, no. 6, pp. 366-368, Jun. 2006. https://doi.org/10.1109/LMWC.2006.875593
- A. R. Kerr, "Mismatch caused by waveguide tolerances, corner radii, and flange misalignment", National Radio Astronomy Observatory EDTN 215, Dec. 2009, rev. Jan. 2010.
- A. C. Newell, R. C. Baird, and P. F. Wacker, "Accurate measurement of antenna gain and polarization at reduced distance by an extrapolation technique", IEEE Trans. Antennas Propagat., vol. AP-21, no. 4, pp. 418-431, Jul. 1973.
- 강진섭, 김정환, 강노원, 김대찬, "(서브)밀리미터파대역 안테나 이득 정밀측정", 2012년도 KIE- ES 전자파기술 하계 학술대회 자료집, 목포대학교, p. 8, 2012년 7월.
- J. A. Gordon, D. R. Novotny, "A simultaneousimaging machine-vision approach for the precision alignment of two mm-wave antennas", Digest of Conferenceon Precision Electromagnetic Measurements (CPEM 2012), Washington DC, USA, pp. 262-263, Jul. 2012.