센서학회지 (Journal of Sensor Science and Technology)

  • 제22권3호
  • /
  • Pages.202-206
  • /
  • 2013
  • /
  • 1225-5475(pISSN)
  • /
  • 2093-7563(eISSN)
한국센서학회 (The Korean Sensors Society)
권호 표지
DOI QR코드

DOI QR Code

친환경 종이 혈당 비이오센서 개발

Development of Eco-Friendly Paper Glucose Bio-Sensor

  • Kim, A-Young (National Cancer Center) ;
  • Lee, Young-Tae (Department of Bioelectronics Engineering, Graduate School, Andong National University)
  • 투고 : 2013.04.08
  • 심사 : 2013.05.05
  • 발행 : 2013.05.31
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

In this paper, a disposable glucose sensor was made of paper. Glucose sensor strip using carbon electrode is appropriate for the low price ones because it requires cheap materials and low cost production. Most of blood glucose sensors were developed with plastics, but it causes pollution problems. Therefore we developed disposable carbon electrode glucose sensor using paper. This sensor consists of upper and bottom plate. On the upper plate, three-dimensional channel are formed through pressing process. The fabricated paper glucose sensor shows relatively short sensing time of about 5seconds, excellent reproducibility ($R^2$=0.9558), and fabrication yield as well.

키워드

참고문헌

  1. NanoMarkets, "Markets for low-cost sensors 2012", 2012.
  2. L. C. Clark and C. Lyons, "Electrode systems for continuous monitoring in cardiovascular", Annals New York Academy of Sciences, Vol. 102, pp. 29-45, 1962.
  3. N. G. Patel, S. Meier, K. Cammann, and G. C. Chemntius, "Screen-printed biosensors using different alcohol oxidase", Sens. Actuator BChem., Vol. 75, Issues 1-2, pp. 101-110, 2001. https://doi.org/10.1016/S0925-4005(01)00545-7
  4. Y. T. Lee and S. R. Lee, "Development of the disposable glucose sensor using Cu/Ni/Au electrode", J. Sensor Sci. & Tech., Vol. 15, No. 5, pp. 352-356, 2006. https://doi.org/10.5369/JSST.2006.15.5.352
  5. J. Anzai, Y. Kobayashi, Y. Suzuki, H. Takeshita, Q. Chen, T. Osa, T. Hoshi, and X. Du, "Enzyme sensors prepared by layer-by-layer deposition of enzyme on the platinum electrode through avidin-biotin interaction", Sens. Actuator B-Chem., Vol. 52, Issues 1-2, pp. 3-9, 1998. https://doi.org/10.1016/S0925-4005(98)00248-2
  6. S. Koide and K. Yokoyama, "Electrochemical characterization of an enzyme electrode base on a ferrocene-containing redox polymer", J. of Electroanalytical Chemistry, Vol. 468, pp. 193-201, 1999. https://doi.org/10.1016/S0022-0728(99)00174-6
  7. T. Osaka, N. Oyama, and T. Ohsaka, Electrochemical Method, Kodansha CO., Ltd., pp. 1137-1138, 1994.

피인용 문헌

  1. Development of Single-layer-structured Glucose Biosensor vol.24, pp.2, 2015, https://doi.org/10.5369/JSST.2015.24.2.83