참고문헌
- AASHTO. (2002). Standard specifications for highway bridges (17th ed.). Washington, DC: American Association of State Highway and Transportation Officials (AASHTO).
- AASHTO. (2010). AASHTO LRFD bridge design specifications (4th ed.). Washington, DC: American Association of State Highway and Transportation Officials (AASHTO).
- ACI 363R-92. (1997). State-of-the-art report on high strength concrete. ACI Committee Report, pp. 55.
- ACI 318-11. (2011). Building code requirements for structural concrete. American Concrete Institute, Farmington Hills, MI: American Concrete Institute. ASTM-C469. (2002).
- Static modulus of elasticity and Poissons ratio of concrete in compression. West Conshohocken, PA: ASTM International.
- Belarbi, A., & Hsu, T. T. C. (1995). Constitutive laws of softened concrete in biaxial tension-compression. ACI Structural Journal, 92(5), 562-573.
- Carrasquiho, R. L., Nilson, A. H., & Slate, F. O. (1982). Properties of High Strength Concrete Subjected to Short-Term Loads. ACI Journal, Proceedings V. 78, No. 3, May-June 1981, pp. 171-178, and Discussion, Proceedings V. 79, No. 2, Mar-Apr. 1982, pp. 162-163.
- Elzanaty, A. H., Nilson, A. H., & Slate, F. O. (1986). Shear capacity of prestressed concrete girders using high-strength concrete. ACI Journal, 83(3), 359-368.
- Kaar, P. H., Hanson, N. W., & Capell, H. T. (1978). Stress-strain characteristics of high-strength concrete. Douglas McHenry International Symposium on Concrete and Concrete Structures, SP-55, American Concrete Institute, Detroit, 1978, pp. 161-185. Also, Research and Development Bulletin No. 051.01D, Portland Cement Association.
- Kaufman, M. K., & Ramirez, J. A. (1988). Re-evaluation of ultimate shear behavior of high-strength concrete prestressed I-girders. ACI Structural Journal, 85(3), 295-303.
- Laskar, A., Hsu, T. T. C., & Mo, Y. L. (2010). Shear strength of prestressed concrete beams part 1: Experiments and shear design equations. ACI Journal, 107(3), 330-339.
- Lyngberg, B. S. (1976). Ultimate shear resistance of partially prestressed reinforced concrete I-beams. ACI Journal, 73(4), 214-222.
- Martinez, S., NiIson, A. H., & Slate, F. O. (1982). Spirallyreinforced high-strength concrete columns. Research Report No. 82-10, Department of Structural Engineering, Cornell University, Ithaca, NY.
- NCHRP 579. (2007). Application of LRFD bridge design specifications to high-strength structural concrete: Shear provisions. NCHRP Report 579, Transportation Research Board, sponsored by ASSHTO and FHWA.
- Perenchio, W. F., & Khieger, P. (1978). Some physical properties of high strength concrete, Research and Development Bulletin No. RD056.01T, Portland Cement Association, Skokie, pp. 7.
- Perera, S. V. T. J., & Mutsuyoshi, H. (2011). Tension stiffening behavior of high-strength concrete tension members. Annual Research Journal of SLSAJ, 11, 10-18.
- Rizkalla, S., Zia, P., Mirmiran, A., Russell, H. G., & Mast, R. (2009). Proposal for concrete strength up to 124 MPa for bridge design. Journal of the Transportation Research Record, No. 2131, pp. 59-67.
- Robertson, I. N., & Durrani, A. J. (1987). Shear strength of prestressed concrete T girders with welded wire fabric as shear reinforcement. PCI Journal, 32(3), 46-61.
- Shahawy, M. A., & Batchelor, B. (1996). Shear behavior of fullscale prestressed concrete girders: Comparison between AASTHO specifications and LRFD code. PCI Journal, Precast/Prestressed Concrete Institute, 41(3), 48-62.
- Tamai, S., Shima, H., Izumo, J., & Okamura, H. (1987). Average stress-strain relationship in post yield range of steel bar in concrete. Concrete Library of JSCE, No. 11, June 1988, pp. 117-129. (Translation from Proceedings of JSCE, No. 378/Vol. 6, Feb 1987).
- Vogel, H. M., & Svecova, D. (2012). Evaluation of elastic modulus for high-strength concrete. ACI Materials Journal, 109(M29), 313-322.
피인용 문헌
- Verification of Selected Calculation Methods Regarding Shear Strength in Reinforced and Prestressed Concrete Beams vol.193, pp.None, 2013, https://doi.org/10.1016/j.proeng.2017.06.196
- Evaluation of the Compatibility of Repair Materials for Concrete Structures vol.11, pp.3, 2013, https://doi.org/10.1007/s40069-017-0208-5
- Verification of selected calculation methods regarding shear strength in beams without web reinforcement vol.219, pp.None, 2018, https://doi.org/10.1051/matecconf/201821903015
- Improving the Tensile Energy Absorption of High Strength Natural Fiber Reinforced Concrete with Fly-Ash for Bridge Girders vol.765, pp.None, 2013, https://doi.org/10.4028/www.scientific.net/kem.765.335
- Image analysis method for crack distribution and width estimation for reinforced concrete structures vol.91, pp.None, 2018, https://doi.org/10.1016/j.autcon.2018.03.012
- Single Web Shear Element Model for Shear Strength of RC Beams with Stirrups vol.12, pp.1, 2013, https://doi.org/10.1186/s40069-018-0252-9