한국전산구조공학회논문집 (Journal of the Computational Structural Engineering Institute of Korea)

  • 제26권2호
  • /
  • Pages.123-130
  • /
  • 2013
  • /
  • 1229-3059(pISSN)
  • /
  • 2287-2302(eISSN)
한국전산구조공학회 (Computational Structural Engineering Institute of Korea)
권호 표지
DOI QR코드

DOI QR Code

N-pole 종류의 FSS가 결합된 복합재료 구조의 잔류응력과 전파투과특성

Study on Thermal Residual Stresses and Transmission Characteristics in N-pole Type Frequency Selective Surface Embedded Composite Structures

  • Park, Kyoung Mi (School of Mechanical Engineering, Yonsei University) ;
  • Hwang, In Han (School of Mechanical Engineering, Yonsei University) ;
  • Chun, Heoung Jae (School of Mechanical Engineering, Yonsei University) ;
  • Hong, Ic Pyo (School of Information Communication Engineering, Kongju National University) ;
  • Park, Yong Bae (School of Electrical and Computer Engineering, Ajoo University) ;
  • Kim, Yoon Jae (Agency for defense development)
  • 투고 : 2012.12.11
  • 심사 : 2013.03.05
  • 발행 : 2013.04.30
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

본 논문에서는 주파수 선택적 투과막(FSS)이 결합된 복합재료 구조에서 구성 재료 간의 열팽창계수 차이로 잔류응력이 발생하므로 이로 인한 층간분리나 FSS의 손상 등 구조적인 파손 가능성과 잔류응력으로 인하여 변형된 FSS가 전파투과특성에 미치는 영향에 대하여 연구하였다. FSS는 단위요소의 종류, 설계변수, 배열에 따라 전파특성이 다르게 나타나므로, PSO 알고리즘을 이용하여 다이폴이 목표주파수에서 투과특성을 갖도록 설계하고 그 설계치수를 다른 N-pole 종류 단위요소(Tripole, Cross dipole, Jerusalem cross)에 적용하여, 복합재료 구조에 발생하는 잔류응력과 그로인한 구조적 손상과 전파 특성을 영향성을 관찰하고 FSS패턴과 복합재료의 적층 변화에 따라 비교하였다.

In this paper, the delamination and failures in frequency selected surface(FSS) caused by residual stresses in the FSS embedded hybrid composites due to the difference between the coefficients of thermal expansion of components and the transmission characteristic changes due to deformation of FSS patterns by residual stresses were studied. FSS may have different electromagnetic characteristics depending on the type of element, design variables, and arrangement. Design variables of dipole FSS were determined using PSO(Particle Swarm Optimization) to obtain the transmission characteristic for the target resonant frequency. Subsequently, the design variables of other types of N-pole(tripole, cross dipole, and Jerusalem cross) were determined based on the dimensions of the dipole for the comparisons of residual stresses of FSS embedded composite structures and transmission characteristics. In addition, effects of FSS pattern, and stacking sequence of composite laminates were considered.

키워드

참고문헌

  1. Lee, S.S. (2000) Analysis of Residual Stresses Induced during Adhesion Process of Chip and Leadframe, Journal of the Computational Structural Engineering, 13(1), pp.97-103.
  2. Seo, I.S., Kim, J.K., Choi, I., Lee, D.G. (2010) Effects of Adhesive Properties in FSS embeeded Hybrid Structures, Proceeding of the Korea Institute of Military Science and Technology conference 2010, pp.36-38.
  3. Kim, K.Y., Kang, K.T., Chun, H.J., Lee, K.Y., Hong, I.P., Lee, M.K. (2011) Thermal Residual Stresses in theFrequency Selective Surface Embedded Composite Structures and Design of Frequency Selective Surface, Journal of the Korean Society for Composite Materials, 24(1), pp.37-44.
  4. Park, K.M., Hwang, I.H., Chun, H.J., Hong, I.P., Park, Y.B., Lee, M.K. (2012) Thermal Residual Stresses in the Frequency Selective Surface Embedded Composite Structures and Design of Frequency Selective Surface, Proceeding of the Korea Institute of Military Science and Technology Conference 2012, p.338.
  5. Hwang, I.H. (2013) Study of Mechanical - Electromagnetic Transmission Characteristics in Frequency Selective Surface Embedded Composite Structures, Master Degree, Yonsei University, pp.1-99.
  6. Chen, H., Hou, X., Deng, L. (2008) Design of Frequency-Selective Surfaces Radome for a Planar Slotted Waveguide Antenna, IEEE Trans, Antennas and Wireless Propagation Letters, 8(3), pp.1231-1233.
  7. Jenn, D.C. (1995) Radar and Laser Cross Section Engineering, American Institute Aeronautics and Astronautics Inc., Washington, DC, pp.1-13.
  8. Kim, P.C., Chin, W.S., Lee, D.G., Seo, I.S. (2006) EM Characteristics of the RAS Composed of E-Glass/Epoxy Composite and Single Dipole FSS Element, Journal of Composite Materials, 75, pp.601-609.
  9. Kim, P.C., Lee, D.G. (2009) Improvement of Bonding Characteristics Between the Frequency Selective Surface and E-glass/epoxy Composite, Journal of Adhesion Science and Technology, 23, pp.215-227. https://doi.org/10.1163/156856108X369570
  10. Munk, B.A. (2000), Frequency Selective Surfaces : Theory and Design, John Wiley & Sons, Inc., New York.
  11. Wahid, M., Morris, S.B. (1991) Band pass radomes for reduced RCS, IEE Colloquium on Antenna Radar Cross-Section, May 7, pp.4/1-4/4.