Bulletin of the Korean Chemical Society

  • 제34권5호
  • /
  • Pages.1345-1348
  • /
  • 2013
  • /
  • 0253-2964(pISSN)
  • /
  • 1229-5949(eISSN)
대한화학회 (Korean Chemical Society)
권호 표지
DOI QR코드

DOI QR Code

Nanoceramic and Polytetrafluoroethylene Polymer Composites for Mechanical Seal Application at Low Temperature

  • Okhlopkova, A.A. (Department of Chemistry, North-Eastern Federal University) ;
  • Sleptsova, S.A. (Department of Chemistry, North-Eastern Federal University) ;
  • Alexandrov, G.N. (Department of Chemistry, North-Eastern Federal University) ;
  • Dedyukin, A.E. (Department of Chemistry, North-Eastern Federal University) ;
  • Shim, Ee Le (Department of Physics, Myongji University) ;
  • Jeong, Dae-Yong (School of Materials Engineering, Inha University) ;
  • Cho, Jin-Ho (Department of Chemistry, North-Eastern Federal University)
  • 투고 : 2012.09.28
  • 심사 : 2013.02.05
  • 발행 : 2013.05.20
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

We investigated the tribochemical and wear properties of Polytetrafluoroethylene (PTFE) based polymer matrix composites with nanoceramic (NC) ${\beta}$-sialon, and $Al_2O_3$ particles for the mechanical seal applications at low temperature. SEM showed that NC particles were homogeneously distributed in the polymer matrix and initiated the formation of the supramolecular spherulites around NC. From the temperature stimulated depolarization (TSD) current results, it was analyzed that the surface charge on nanoceramic affected the formation of the spherulites structure. 2 wt % $Al_2O_3$ NC did not degrade the mechanical properties of PTFE so that composites showed the similar values of tensile strength, elongation at the rupture and friction coefficient as those of neat PTFE. However, the composite with 2 wt % $Al_2O_3$ NC revealed the improved wear resistance, wear rate of 0.4-1.2 mg/h at room temperature and 0.28 mg/h at $-40^{\circ}C$, respectively, while the neat PTFE the 70-75 mg/h at room temperature and 70.3 mg/h at $-40^{\circ}C$.

키워드

참고문헌

  1. Okhlopkova, A. A.; Petrova, P. N.; Popov, C. N.; Sleptsova, S. A. Russian Journal of General Chemistry 2008, 1(11), 147.
  2. Buznik, V. M.; Fomin, V. M. etc. Metal-polymeric Nanocomposites; SB RAS: 2005; p 258.
  3. Okhlopkova, A. A.; Adrianova, O. A.; Popov, C. N. Modification of Polymers by Ultradisperse Compounds; SB RAS: 2003; p 253.
  4. Okhlopkova, A. A.; Popov, C. N.; Sleptsova, S. A. etc. Journal of Structural Chemistry 2004, 45, 163.
  5. Zhang, Z. Z.; Xue, O. J.; Liu, W. M.; Shen, W. Tribology International 1998, 37, 361.
  6. Blanchet, T. A.; Kennedy, F. E. Wear 1992, 153, 229. https://doi.org/10.1016/0043-1648(92)90271-9
  7. Huang, Z.; Wang, N.; Zhang, Y.; Hu, H.; Luo, Y. Composites. Part A: Applied Science and Manufacturing 2012, 43, 114. https://doi.org/10.1016/j.compositesa.2011.09.025
  8. http://su.diva-portal.org/smash/record.jsf?pid=diva2:189799
  9. http://www.syalons.com/materials/syalon101/
  10. http://www.woodheadpublishing.com/en/book.aspx?bookID=1550&printer=yes
  11. http://what-when-how.com/nanoscience-andnanotechnology/mechanosynthesis-of-nanophase-powdersnanotechnology/
  12. Aderikha, V.; Khedkar, J.; Negulescu, I.; Meletis, E. I. Wear 2002, 252, 361. https://doi.org/10.1016/S0043-1648(01)00859-6
  13. GOST 25209-82 Plastics and polymer films. Methods for the determination of surface charges of electrets. http://wiki-numbers.ru/gost/gost-25209-82.
  14. GOGT 11262-80 State standard. Plastics. Tensile Tests Method: http://www.complexdoc.ru/ntdpdf/484479/plastmassy_metod_ispytaniya_na_rastyazhenie.pdf
  15. GOST 11629-75 State standard. Plastics. Method for the determination of friction coefficient: http://www.complexdoc.ru/ntdpdf/484478/plastmassy_metod_opredeleniya_koeffitsienta_treniya.pdf
  16. Andena, L.; Rink, M.; Polastri, F. Polymer Engineering and Science 2004, 44, 1368. https://doi.org/10.1002/pen.20132
  17. Jauffres, D.; Lame, O.; Vigier, G.; Dore, F.; Chervin, C. Journal of Applied Polymer Science 2007, 106, 488. https://doi.org/10.1002/app.26231
  18. Jauffres, D.; Lame, O.; Vigier, G.; Dore, F. Polymer 2007, 48, 6374. https://doi.org/10.1016/j.polymer.2007.07.058
  19. Okhlopkova, A. A.; Vinogradov, A. V.; Pinchuk, L. S. Plastics Filled with Ultradispersed Inorganic Compounds; Gomel, Belarus, Institute of Mechanics of Metal-polymer system: 1999; p 164.
  20. Khedkar, J.; Negulescu, I.; Meletis, E. I. Wear 2002, 252, 361. https://doi.org/10.1016/S0043-1648(01)00859-6
  21. Liu, P.; Huang, T.; Lu, R.; Li, T. Wear 2012, 289, 17. https://doi.org/10.1016/j.wear.2012.04.021
  22. Mitjan, K.; Joze, V. Tribology International 2001, 34(12), 831. https://doi.org/10.1016/S0301-679X(01)00083-4
  23. Mohammadi, M.; Ghorbani, M.; Azizi, A. Journal of Coatings Technology and Research 2012, 7(6), 697.
  24. Kharde, Y. R.; Saisrinadh, K. V. Bulletin of Materials Science 2012, 34(4), 1003.
  25. Poitou, B.; Dore, F.; Champomier, R. International Journal of Material Forming 2012, 2, 657.
  26. Demas, N. G.; Zhang, J.; Polycarpou, A. A.; Economy, J. Tribology Letters 2008, 29, 253. https://doi.org/10.1007/s11249-008-9303-8
  27. Liu, P.; Huang, T.; Lu, R.; Li, T. Wear 2012, 289, 17. https://doi.org/10.1016/j.wear.2012.04.021
  28. Zhang, J.; Polycarpou, A. A.; Economy, J. Tribology Letters 2012, 38(3), 355.
  29. Chen, J. Tribology Letters 2012, 38(3), 217.
  30. Jia, Z.; Yang, Y.; Chen, J.; Yu, X. Wear 2010, 268, 996. https://doi.org/10.1016/j.wear.2009.12.009

피인용 문헌

  1. Supramolecular Structure and Mechanical Characteristics of Ultrahigh-Molecular-Weight Polyethylene-Inorganic Nanoparticle Nanocomposites vol.37, pp.4, 2016, https://doi.org/10.1002/bkcs.10700
  2. Reinforcement of Polyethylene Pipes with Modified Carbon Microfibers vol.60, pp.3, 2016, https://doi.org/10.5012/jkcs.2016.60.3.177
  3. Tribological Behaviour of Multi-Walled Carbon Nanotubes (MWCNT) Filled Polybutylene Terephthalate (PBT) Nanocomposites vol.70, pp.3, 2017, https://doi.org/10.1007/s12666-017-1055-4
  4. Structure and Friction Behavior of UHMWPE/Inorganic Nanoparticles vol.670, pp.1662-9795, 2015, https://doi.org/10.4028/www.scientific.net/KEM.670.69
  5. Enhancement of Compatibility between Ultrahigh-Molecular-Weight Polyethylene Particles and Butadiene-Nitrile Rubber Matrix with Nanoscale Ceramic Particles and Characterization of Evolving Layer vol.34, pp.12, 2013, https://doi.org/10.5012/bkcs.2013.34.12.3762
  6. The friction and wear properties of carbon nanotubes/graphite/carbon fabric reinforced phenolic polymer composites vol.24, pp.1, 2013, https://doi.org/10.1080/09243046.2014.976734