Journal of information and communication convergence engineering

  • 제11권1호
  • /
  • Pages.56-61
  • /
  • 2013
  • /
  • 2234-8255(pISSN)
  • /
  • 2234-8883(eISSN)
한국정보통신학회 (The Korea Institute of Information and Commucation Engineering)
권호 표지
DOI QR코드

DOI QR Code

Embedded RF Test Circuits: RF Power Detectors, RF Power Control Circuits, Directional Couplers, and 77-GHz Six-Port Reflectometer

  • Eisenstadt, William R. (Department of Electrical and Computer Engineering, University of Florida) ;
  • Hur, Byul (Department of Electrical and Computer Engineering, University of Florida)
  • 투고 : 2012.09.25
  • 심사 : 2012.12.26
  • 발행 : 2013.03.31
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

Modern integrated circuits (ICs) are becoming an integrated parts of analog, digital, and radio frequency (RF) circuits. Testing these RF circuits on a chip is an important task, not only for fabrication quality control but also for tuning RF circuit elements to fit multi-standard wireless systems. In this paper, RF test circuits suitable for embedded testing are introduced: RF power detectors, power control circuits, directional couplers, and six-port reflectometers. Various types of embedded RF power detectors are reviewed. The conventional approach and our approach for the RF power control circuits are compared. Also, embedded tunable active directional couplers are presented. Then, six-port reflectometers for embedded RF testing are introduced including a 77-GHz six-port reflectometer circuit in a 130 nm process. This circuit demonstrates successful calibrated reflection coefficient simulation results for 37 well distributed samples in a Smith chart. The details including the theory, calibration, circuit design techniques, and simulations of the 77-GHz six-port reflectometer are presented in this paper.

키워드

참고문헌

  1. R. G. Meyer, "Low-power monolithic RF peak detector analysis," IEEE Journal of Solid-State Circuits, vol. 30, no. 1, pp. 65-67, 1995. https://doi.org/10.1109/4.350192
  2. A. Valdes-Garcia, R. Venkatasubramanian, R. Srinivasan, J. Silva- Martinez, and E. Sanchez-Sinencio, "A CMOS RF RMS detector for built-in testing of wireless transceivers," in Proceedings of the 23rd IEEE VLSI Test Symposium, Palm Springs: CA, pp. 249- 254, 2005.
  3. Y. Zhou and M. Y. W. Chia, "A low-power ultra-wideband CMOS true RMS power detector," IEEE Transactions on Microwave Theory and Techniques, vol. 56, no. 5, pp. 1052-1058, 2008. https://doi.org/10.1109/TMTT.2008.921299
  4. E. H. Klaassen, R. J. Reay, and G. T. A. Kovacs, "Diode-based thermal RMS converter with on-chip circuitry fabricated using standard CMOS technology," in Proceedings of the 8th International Conference on Solid-State Sensors and Actuators (TRANSDUCERS), Stockholm, Sweden, pp.154-157, 1995.
  5. L. Lei, J. L. Hesler, H. Xu, A. W. Lichtenberger, and R. M. Weikle, "A broadband quasi-optical terahertz detector utilizing a zero bias Schottky diode," IEEE Microwave and Wireless Components Letters, vol. 20, no. 9, pp. 504-506, 2010. https://doi.org/10.1109/LMWC.2010.2055553
  6. Q. Yin, W. R. Eisenstadt, R. M. Fox, and T. Zhang, "A translinear RMS detector for embedded test of RF ICs," IEEE Transactions on Instrumentation and Measurement, vol. 54, no. 5, pp. 1708-1714, 2005. https://doi.org/10.1109/TIM.2005.855105
  7. D. V. Mercy, "A review of automatic gain control theory," Radio and Electronic Engineer, vol. 51, no. 11/12, pp. 579-590, 1981. https://doi.org/10.1049/ree.1981.0084
  8. Q. H. Duong, Q. Le, C. W. Kim, and S. G. Lee, "A 95-dB linear low-power variable gain amplifier," IEEE Transactions on Circuits and Systems I: Regular Papers, vol. 53, no. 8, pp. 1648-1657, 2006. https://doi.org/10.1109/TCSI.2006.879058
  9. H. D. Lee, K. A. Lee, and S. C. Hong, "A wideband CMOS variable gain amplifier with an exponential gain control," IEEE Transactions on Microwave Theory and Techniques, vol. 55, no. 6, pp. 1363-1373, 2007. https://doi.org/10.1109/TMTT.2007.896787
  10. H. O. Elwan, A. El Adawi, M. Ismail, H. K. Olsson, and A. M. Soliman, "Digitally controlled dB-linear CMOS variable gain amplifier," Electronics Letters, vol. 35, no. 20, pp. 1725-1727, 1999. https://doi.org/10.1049/el:19991193
  11. F. Zhang and P. R. Kinget, "Low-power programmable gain CMOS distributed LNA," IEEE Journal of Solid-State Circuits, vol. 41, no. 6, pp. 1333-1343, 2006. https://doi.org/10.1109/JSSC.2006.874283
  12. B. Hur and W. R. Eisenstadt, "CMOS programmable gain distributed amplifier with 0.5-dB gain steps," IEEE Transactions on Microwave Theory and Techniques, vol. 59, no. 6, pp. 1552-1559, 2011. https://doi.org/10.1109/TMTT.2011.2131675
  13. R. W. Vogel, "Analysis and design of lumped- and lumpeddistributed- element directional couplers for MIC and MMIC applications," IEEE Transactions on Microwave Theory and Techniques, vol. 40, no. 2, pp. 253-262, 1992. https://doi.org/10.1109/22.120097
  14. Y. C. Chiang and C. Y. Chen, "Design of a wide-band lumpedelement 3-dB quadrature coupler," IEEE Transactions on Microwave Theory and Techniques, vol. 49, no. 3, pp. 476-479, 2001. https://doi.org/10.1109/22.910551
  15. E. A. Fardin, K. Ghorbani, and A. S. Holland, "A varactor tuned branch-line hybrid coupler," in Proceedings of Asia-Pacific Microwave Conference (APMC2005), Suzhou, China, 2005.
  16. B. Hur and W. R. Eisenstadt, "Tunable broadband MMIC active directional coupler," IEEE Transactions on Microwave Theory and Techniques, vol. 61, no. 1, pp. 168-176, 2013. https://doi.org/10.1109/TMTT.2012.2228218
  17. G. F. Engen, "The six-port reflectometer: an alternative network analyzer," in IEEE MTT-S International Microwave Symposium Digest, San Francisco: CA, pp.44-46, 1977.
  18. G. F. Engen, "A (historical) review of the six-port measurement technique," IEEE Transactions on Microwave Theory and Techniques, vol. 45, no. 12, pp. 2414-2417, 1997. https://doi.org/10.1109/22.643853
  19. F. Wiedmann, B. Huyart, E. Bergeault, and L. P. Jallet, "New structure for a six-port reflectometer in monolithic microwave integrated-circuit technology," IEEE Transactions on Instrumentation and Measurement, vol. 46, no. 2, pp. 527-530, 1997. https://doi.org/10.1109/19.571902
  20. F. Wiedmann, B. Huyart, E. Bergeault, and L. P. Jallet, "A new robust method for six-port reflectometer calibration," IEEE Transactions on Instrumentation and Measurement, vol. 48, no. 5, pp. 927-931, 1999. https://doi.org/10.1109/19.799649
  21. E. Bergeault, B. Huyart, G. P. J. Geneves, and L. P. Jallet, "Characterization of diode detectors used in six-port reflectometers," IEEE Transactions on Instrumentation and Measurement, vol. 40, no. 6, pp. 1041-1043, 1991. https://doi.org/10.1109/19.119790
  22. G. F. Engen, "Calibrating the six-port reflectometer by means of sliding terminations," IEEE Transactions on Microwave Theory and Techniques, vol. 26, no. 12, pp. 951-957, 1978. https://doi.org/10.1109/TMTT.1978.1129527
  23. U. Stumper, "Finding initial estimates needed for the Engen method of calibrating single six-port reflectometers," IEEE Transactions on Microwave Theory and Techniques, vol. 38, no. 7, pp. 946-949, 1990. https://doi.org/10.1109/22.55790
  24. B. Neumeyer, "A new analytical method for complete six-port reflectometer calibration," IEEE Transactions on Instrumentation and Measurement, vol. 39, no. 2, pp. 376-379, 1990. https://doi.org/10.1109/19.52518
  25. I. Kasa, "Closed-form mathematical solutions to some network analyzer calibration equations," IEEE Transactions on Instrumentation and Measurement, vol. 23, no. 4, pp. 399-402, 1974. https://doi.org/10.1109/TIM.1974.4314321
  26. H. J. Eul and B. Schiek, "A generalized theory and new calibration procedures for network analyzer self-calibration," IEEE Transactions on Microwave Theory and Techniques, vol. 39, no. 4, pp. 724-731, 1991. https://doi.org/10.1109/22.76439
  27. M. C. Lee and W. R. Eisenstadt, "A wide-band differential and single-ended microwave amplitude detector," in Proceedings of the 11th Annual IEEE Wireless and Microwave Technology Conference, Melbourne: FL, pp.1-5, 2010.

피인용 문헌

  1. CMOS Broadband Programmable Gain Active Balun With 0.5-dB Gain Steps vol.63, pp.8, 2015, https://doi.org/10.1109/TMTT.2015.2448092
  2. Testing and Validation of Adaptive Impedance Matching System for Broadband Antenna vol.8, pp.9, 2019, https://doi.org/10.3390/electronics8091055