DOI QR코드

DOI QR Code

A design procedure of dissipative braces for seismic upgrading structures

  • Bergami, A.V. (University of Roma Tre, Department of Structures) ;
  • Nuti, C. (University of Roma Tre, Department of Structures)
  • 투고 : 2011.02.22
  • 심사 : 2012.04.12
  • 발행 : 2013.01.25

초록

The research presented in this paper deals with the seismic protection of existing frame structures by means of passive energy dissipation. A displacement-based procedure to design dissipative bracings for the seismic protection of frame structures is proposed and some applications are discussed. The procedure is based on the displacement based design using the capacity spectrum method, no dynamic non linear analyses are needed. Two performance objective have been considered developing the procedure: protect the structure against structural damage or collapse and avoid non-structural damage as well as excessive base shear. The compliance is obtained dimensioning dissipative braces to limit global displacements and interstorey drifts. Reference is made to BRB braces, but the procedure can easily be extended to any typology of dissipative brace. The procedure has been validated through a comparison with nonlinear dynamic response of two 2D r.c. frames, one bare and one infilled. Finally a real application, on an existing 3D building where dissipative braces available on market are used, is discussed.

키워드

참고문헌

  1. Albanesi, T., Bergami, A.V. and Nuti, C. (2008), "Design procedure for buckling restrained braces to retrofit existing r.c. frames", Proceedings of 14th World Conference on Earthquake Engineering, Beijing, China.
  2. Applied Technology Council. (1996), Seismic evaluation and retrofit of concrete buildings, Report ATC-40, Redwood City, California.
  3. Bergami, A.V. (2008), Implementation and experimental verification of non linear models for masonry infilled r.c. frames, Ph.D Thesis. Universita degli Studi Roma Tre, Rome, Italy.
  4. Bergami, A.V. (2011), Masonry infilled r.c. frames, LAP LAMBERT Academic Publishing GmbH & Co. KG, ISBN: 978-3-8465-0324-9.
  5. Albanesi, T., Bergami, A.V. and Nuti, C. (2009), "Una procedura progettuale per la protezione sismica di telai in c.a. mediante controventi dissipativi", Proceedings of XIII Convegno ANIDIS L' ingegneria Sismica in Italia. Bologna, Italy.
  6. Bergami, A.V. and Nuti, C. (2009), "Discussione, applicazione e validazione di una procedura progettuale per la protezione sismica di telai tamponati mediante controventi dissipativi", Proceedings of I convegno di ingegneria forense IF CRASC '09, Naples, Italy.
  7. Berman, J.W. and Brruneau, M. (2009), "Cyclic testing of buckling restrained braced frame with uncostrained gusset connections", J. Struct. Eng.-ASCE, 135(12), 1499-1510. https://doi.org/10.1061/(ASCE)ST.1943-541X.0000078
  8. Black, C.J., Makris, N. and Aiken, I.D. (2004), "Component testing, seismic evaluation and characterization of buckling restrained braces", J. Struct. Eng.-ASCE, 130(6), 880-894. https://doi.org/10.1061/(ASCE)0733-9445(2004)130:6(880)
  9. Ciampi, V. (1991), "Use of energy dissipating devices, based on yielding of steel, for earthquake protection of structures", Proceedings of Protezione sismica degli edifici, Ancona, Italy.
  10. Ciampi, V., De Angelis, M. and Paolacci, F. (1995), "Design of yelding or friction-based dissipative bracings for seismic protection of buildings", Eng. Struct., 17(5), 381-391. https://doi.org/10.1016/0141-0296(95)00021-X
  11. Constantinou, M.C., Soong, T.T. and Dargush, G.F. (1998), "Passive energy dissipation systems for structural design and retrofit", MCEER - State University of New York at Buffalo.
  12. Dolce, M., Cardone, D. and Marnetto, R. (2000), "Implementation and testing of passive control devices based on shape memory alloys", Earthq. Eng. Struct. D., 29(7), 945-968. https://doi.org/10.1002/1096-9845(200007)29:7<945::AID-EQE958>3.0.CO;2-#
  13. Dolce, M., Cardone, D. and Ponzo, F.C. (2001), "Retrofitting of R/C framed structures through SMA-based energy dissipating and re-centering braces", Proceedings of 7th International Seminar on Seismic Isolation, Passive Energy Dissipation and Active Control of Vibrations of Structures, Assisi, Italy.
  14. Di Sarno, L. and Manfredi, G. (2010), "Seismic retrofitting with buckling restrained braces: Application to an existing non-ductile RC framed building", Soil Dyn. Earthq. Eng., 30(11), 1279-1297. https://doi.org/10.1016/j.soildyn.2010.06.001
  15. Earthquake Engineering Research Institute (2009), "The Mw 6.3 Abruzzo, Italy, Earthquake of April 6, 2009", Report available on line at: .
  16. Fajfar, P. (1999), "Capacity spectrum method based on inelastic spectra", Earthq. Eng. Struct. D., 28, 979-993. https://doi.org/10.1002/(SICI)1096-9845(199909)28:9<979::AID-EQE850>3.0.CO;2-1
  17. Fajfar, P. and Gaspersic, P. (2000), "The N2 method for the seismic damage analysis for RC buildings", Earthq. Eng. Struct. D., 25(1), 23-67.
  18. FEMA-274 (1997), "NEHRP Commentary on the guidelines for the seismic rehabilitation of buildings", Federal Emergency Management Agency Publication, U.S.A., 274.
  19. FEMA - ASCE 356 (2000), "Prestandard and commentary for the seismic rehabilitation of buildings", Washington, DC, USA.
  20. Filiatrault, A. and Cherry, S. (1988), "A simplified seismic design procedure for friction damped structures", Procedings of Fourth U.S. National Conference on Earthquake Engineering, 3, Palm Springs, U.S.A.
  21. Filiatrault, A. and Cherry, S. (1990), "Seismic design spectra for friction damped structures", J. Struct. Eng., 116(5), 1334-1355. https://doi.org/10.1061/(ASCE)0733-9445(1990)116:5(1334)
  22. Iervolino, I., Maddaloni, G. and Cosenza, E. (2008), "Eurocode 8 compliant real record sets for seismic analysis of structures", J. Earthq. Eng., 12(1), 54-90. https://doi.org/10.1080/13632460701457173
  23. Kim, J. and Choi, H. (2004), "Behavior and design of structures with buckling-restrained braces", Eng. Struct., 26(6), 693-706. https://doi.org/10.1016/j.engstruct.2003.09.010
  24. Mazzolani, F.M. (2006), "Seismic upgrading of RC buildings by advanced techniques", The ILVA-IDEM Research Project, Polimerica Publisher, Italy.
  25. Mazzolani, F.M. (2008), "Innovative metal systems for seismic upgrading of RC structures", J. Constr. Steel Res., 64(7-8), 882-895. https://doi.org/10.1016/j.jcsr.2007.12.017
  26. Palazzo, G., López-Almansa, F., Cahís, X. and Crisafulli, F. (2009), "A low-tech dissipative buckling restrained brace. Design, analysis, production and testing", Eng. Struct., 31(9), 2152-2161. https://doi.org/10.1016/j.engstruct.2009.03.015
  27. Ponzo, F.C., Dolce, M., Vigoriti, G., Arleo, G. and Di Cesare, A. (2009), "Progettazione di controventi dissipativi a comportamento dipendente dagli spostamenti", Proceedings of XIII Convegno ANIDIS L' ingegneria Sismica in Italia, Bologna, Italy.
  28. Soong, T.T. and Spencer Jr, B.F. (2002), "Supplemental energy dissipation: state-of-the-art and state-of-the-practice", Eng. Struct., 24(3), 243-259. https://doi.org/10.1016/S0141-0296(01)00092-X
  29. Sabelli, R., Mahin, S. and Chang, C. (2003), "Supplemental energy dissipation: state-of-the-art and state-of-the-practice", Eng. Struct., 25(5), 655-666. https://doi.org/10.1016/S0141-0296(02)00175-X
  30. SEAOC/AISC (2005), "Recommended provisions for buckling-restrained braced frames", Struct. Eng. Assoc. of California/American Inst. of Steel Const.
  31. Vulcano, A. and Mazza, F. (2002), "A simplified procedure for the seismic design of framed buildings with dissipative braces", Proceedings of 12th European Conference on Earthquake Engineering, London, UK.
  32. Wen-Hsiung, L. and Chopra, A.K. (2003), "Eartquake response of elastic single-degree-of-freedom systems with nonlinear visco-elastic dampers", J. Eng. Mech.-ASCE, 129(6), 597-606. https://doi.org/10.1061/(ASCE)0733-9399(2003)129:6(597)
  33. Whittaker, A.S., Bertero, V., Alonso, J. and Thompson, C. (1989), "Earthquake simulator testing of steel plates added damping and stiffness elements", Technical Report EERC- 89/02, University of California, Berkeley, CA.
  34. Xie, W. (2005), "State of the art of buckling-restrained braces in Asia", J. Constr. Steel Res., 61(6), 727-748. https://doi.org/10.1016/j.jcsr.2004.11.005
  35. Zhang, R.H. and Soong, T.T. (1992), "Seismic design of viscoelastic dampers for structural applications", J. Struct. Eng., 118(5), 1375-1392. https://doi.org/10.1061/(ASCE)0733-9445(1992)118:5(1375)

피인용 문헌

  1. A simple approach for seismic retrofit of low-rise concentric X-braced steel frames vol.107, 2015, https://doi.org/10.1016/j.jcsr.2015.01.017
  2. Damage-Based Inelastic Seismic Spectra vol.17, pp.10, 2017, https://doi.org/10.1142/S0219455417501152
  3. A multi-performance design method for seismic upgrading of existing RC frames by BRBs vol.46, pp.7, 2017, https://doi.org/10.1002/eqe.2846
  4. Comprehending the ductile behavior of slotted bolted connections vol.26, pp.3, 2017, https://doi.org/10.1002/tal.1309
  5. Seismic assessment and retrofitting of existing structure based on nonlinear static analysis vol.49, pp.5, 2014, https://doi.org/10.12989/sem.2014.49.5.631
  6. Seismic retrofit of reinforced concrete frames using buckling-restrained braces with bearing block load transfer mechanism vol.45, pp.14, 2016, https://doi.org/10.1002/eqe.2763
  7. Seismic Retrofit of Reinforced Concrete Frame Buildings with Hysteretic Bracing Systems: Design Procedure and Behaviour Factor vol.2017, 2017, https://doi.org/10.1155/2017/2639361
  8. Nonlinear dynamic response of reinforced concrete building retrofitted with buckling restrained braces vol.8, pp.6, 2015, https://doi.org/10.12989/eas.2015.8.6.1349
  9. Seismic vulnerability assessment of historical centers at urban scale 2017, https://doi.org/10.1080/15583058.2017.1402969
  10. Seismic response mitigation of chemical plant components by passive control techniques vol.26, pp.5, 2013, https://doi.org/10.1016/j.jlp.2013.03.003
  11. Energy-Based Design Criterion of Dissipative Bracing Systems for the Seismic Retrofit of Frame Structures vol.8, pp.2, 2018, https://doi.org/10.3390/app8020268
  12. Experimental Investigation of the Shear Strength of RC Beams Extracted from an Old Structure and Strengthened by Carbon FRP U-Strips vol.8, pp.7, 2018, https://doi.org/10.3390/app8071182
  13. Seismic design and retrofit of frame structures with hysteretic dampers: a simplified displacement-based procedure pp.1573-1456, 2019, https://doi.org/10.1007/s10518-019-00558-8
  14. Experimental study on seismic performance of reinforced concrete frames retrofitted with eccentric buckling-restrained braces (BRBs) vol.12, pp.1, 2013, https://doi.org/10.12989/eas.2017.12.1.079
  15. Proposal of a Incremental Modal Pushover Analysis (IMPA) vol.13, pp.6, 2013, https://doi.org/10.12989/eas.2017.13.6.539
  16. A Displacement-Based Design Method for Seismic Retrofit of RC Buildings Using Dissipative Braces vol.2018, pp.None, 2013, https://doi.org/10.1155/2018/5364564
  17. DIBRAST: A Computer-Aided Seismic Design Procedure for Frame Structures Equipped With Hysteretic Devices vol.6, pp.None, 2013, https://doi.org/10.3389/fbuil.2020.00013
  18. Seismic damage and fragility assessment of ancient masonry churches located in central Chile vol.18, pp.7, 2020, https://doi.org/10.1007/s10518-020-00831-1
  19. Performance of innovative composite buckling-restrained fuse for concentrically braced frames under cyclic loading vol.36, pp.2, 2013, https://doi.org/10.12989/scs.2020.36.2.163
  20. Activation control extension of a design method of fluid viscous dissipative bracing systems vol.18, pp.8, 2013, https://doi.org/10.1007/s10518-020-00849-5
  21. Design Forces of Horizontal Braces Unlocated at Middle of Columns considering Random Initial Geometric Imperfections vol.2021, pp.None, 2013, https://doi.org/10.1155/2021/1264270
  22. Seismic Retrofit of an Existing Reinforced Concrete Building with Buckling-restrained Braces vol.15, pp.1, 2021, https://doi.org/10.2174/1874149502115010203
  23. In-plane and out-of-plane nonlinear seismic response of masonry infills for hospitals retrofitted with hysteretic damped braces vol.148, pp.None, 2013, https://doi.org/10.1016/j.soildyn.2021.106803
  24. A simplified design procedure for seismic upgrade of frame structures equipped with hysteretic dampers vol.251, pp.no.pa, 2013, https://doi.org/10.1016/j.engstruct.2021.113504