DOI QR코드

DOI QR Code

Production of high dissolved O2/O3 with rotating wheel entraining gas method for environmental application

  • Li, Haitao (National Key Laboratory of Biochemical Engineering, Institute of Process Engineering, Chinese Academy of Sciences) ;
  • Xie, Bo (National Key Laboratory of Biochemical Engineering, Institute of Process Engineering, Chinese Academy of Sciences) ;
  • Hui, Mizhou (National Key Laboratory of Biochemical Engineering, Institute of Process Engineering, Chinese Academy of Sciences)
  • Received : 2012.08.20
  • Accepted : 2012.12.26
  • Published : 2013.03.25

Abstract

There is a significant demand to make various dissolved gases in water. However, the conventional aeration method shows low gas mass transfer rate and gas utilization efficiency. In this study, a novel rotating wheel entraining gas method was developed for making high dissolved $O_2$ and $O_3$ in water. It produced higher concentration and higher transfer rate of dissolved $O_2$ and $O_3$ than conventional bubble aeration method, especially almost 100% of gas transfer efficiency was achieved for $O_3$ in enclosed reactor. For application of rotating wheel entraining gas method, aerobic bio-reactor and membrane bio-reactor (MBR) were successfully used for treatment of domestic and pharmaceutical wastewater, respectively; and vacuum ultraviolet $(VUV)/UV+O_3/O_2$ reactors were well used for sterilization in air/water, removal of dust particles and toxic gases in air, and degradation of pesticide residue and sterilization on fruits and vegetables.

Keywords

References

  1. Scott, J.P. and Ollis, D.F. (1995), "Integration of chemical and biological oxidation processes for water treatment: Review and recommendations", Environ. Prog., 14(2), 88-103. https://doi.org/10.1002/ep.670140212
  2. Liao, B.Q., Lin, H.J., Langevin, S.P., Gao, W.J. and Leppard, G.G. (2011), "Effects of temperature and dissolved oxygen on sludge properties and their role in bioflocculation and settling", Water Res., 45(2), 509-520. https://doi.org/10.1016/j.watres.2010.09.010
  3. Melin, T., Jefferson, B., Bixio, D., Thoeye, C., de Wilde, C., de Koning, J., van der Graaf, J. and Wintgens, T. (2006), "Membrane bioreactor technology for wastewater treatment and reuse", Desalination, 187(1-3), 271-282. https://doi.org/10.1016/j.desal.2005.04.086
  4. Newby, D., Marks, L. and Lyall, F. (2005), "Dissolved oxygen concentration in culture medium: assumptions and pitfalls", Placenta, 26(4), 353-357. https://doi.org/10.1016/j.placenta.2004.07.002
  5. Zhang, S., Guo, M., Zhang, X. and Zhang, S. (2008), "Control of pH and dissolved oxygen in self-manufactured animal cell bioreactors by four gases", J. Biotechnol., 136(S1), S490-S491.
  6. Guzel-Seydim, Z.B., Greene, A.K. and Seydim, A.C. (2004), "Use of ozone in the food industry", Lebensm-Wiss Technol.: Food Sci. Tech., 37(4), 453-460. https://doi.org/10.1016/j.lwt.2003.10.014
  7. Pascual, A., Llorca, I. and Canut, A. (2007), "Use of ozone in food industries for reducing the environmental impact of cleaning and disinfection activities", Trends Food Sci. Tech., 18(S1), S29-S35. https://doi.org/10.1016/j.tifs.2006.10.006
  8. Meunier, L., Canonica, S. and Gunten, U. (2006), "Implications of sequential use of UV and ozone for drinking water quality", Water Res., 40(9), 1864-1876. https://doi.org/10.1016/j.watres.2006.02.030
  9. Camel, V. and Bermond, A. (1998), "The use of ozone and associated oxidation processes in drinking water treatment", Water Res., 32(11), 3208-3222. https://doi.org/10.1016/S0043-1354(98)00130-4
  10. Ratpukdi, T., Siripattanakul, S. and Khan, E. (2010), "Mineralization and biodegradability enhancement of natural organic matter by ozone-VUV in comparison with ozone, VUV, ozone-UV, and UV: Effects of pH and ozone dose", Water Res., 44(11), 3531-3543. https://doi.org/10.1016/j.watres.2010.03.034
  11. Treguer, R., Tatin, R., Couvert, A., Wolbert, D. and Tazi-Pain, A. (2010), "Ozonation effect on natural organic matter adsorption and biodegradation-Application to a membrane bioreactor containing activated carbon for drinking water production", Water Res., 44(3), 781-788. https://doi.org/10.1016/j.watres.2009.10.023
  12. Zhou, H. and Smith, D.W. (2000), "Ozone mass transfer in water and wastewater treatment: experimental observations using a 2D laser particle dynamics analyzer", Water Res., 34(3), 909-921. https://doi.org/10.1016/S0043-1354(99)00196-7
  13. Tate, J.L. and Payne, G.F. (1991), "Plant cell growth under different levels of oxygen and carbon dioxide", Plant Cell Rep., 10(1), 22-25.
  14. Taticek, R.A., Lee, C. W.T. and Shuler, M.L. (1994), "Large-scale insect and plant cell culture", Curr. Opin. Biotechnol., 5(2), 165-174. https://doi.org/10.1016/S0958-1669(05)80031-X
  15. Kumar, B., Patel, A.K. and Rao, A.R. (2011), "Mass transfer and shear rate in baffled surface aerator", Korean J. Chem. Eng., 28(2), 502-506. https://doi.org/10.1007/s11814-010-0377-2
  16. Kies, F.K., Benadda, B. and Otterbein, M. (2004), "Experimental study on mass transfer of a co-current gas-liquid contactor performing under high gas velocities", Chem. Eng. Process, 43(11), 1389-1395. https://doi.org/10.1016/j.cep.2003.12.009
  17. Gillot, S. and Duit, A.H. (2000), Effect of air flow rate on oxygen transfer in an oxidation ditch equipped with fine bubble diffusers and slow speed mixers, Water Res., 34(5),1756-1762. https://doi.org/10.1016/S0043-1354(99)00323-1
  18. Hui, M. (2010), "Bioreactor and uses thereof", US patent, WO/2010/090840.
  19. Konieczny, K., Sakol, D. and Bodzek, M. (2006), "Efficiency of the hybrid coagulation-ultrafiltration water treatment process with the use of immersed hollow-fiber membranes", Desalination, 198(1-3), 102-110. https://doi.org/10.1016/j.desal.2006.09.015
  20. Marquez, A.L., Wild, G. and Midoux, N. (1994), "A review of recent chemical techniques for the determination of the volumetric mass-transfer coefficient kLa in gas-liquid reactors", Chem. Eng. Process, 33(4), 247-260. https://doi.org/10.1016/0255-2701(94)01006-4

Cited by

  1. A Review on Minimum Quantity Lubrication for Machining Processes vol.30, pp.8, 2015, https://doi.org/10.1080/10426914.2014.994759
  2. Reducing Work Overtime in Production Line by Comparing Two Heuristic Line Balancing Method: Case Study of Beam Comp Stering Hanger at PT. Metindo Era Sakti vol.453, pp.1757-899X, 2018, https://doi.org/10.1088/1757-899X/453/1/012049