DOI QR코드

DOI QR Code

Approximate methods to evaluate storey stiffness and interstory drift of RC buildings in seismic area

  • Caterino, N. (Department of Technology, University of Naples 'Parthenope', Centro Direzionale) ;
  • Cosenza, E. (Department of Structural Engineering, University of Naples Federico II) ;
  • Azmoodeh, B.M. (Department of Technology, University of Naples 'Parthenope', Centro Direzionale)
  • 투고 : 2012.07.27
  • 심사 : 2013.04.01
  • 발행 : 2013.04.25

초록

During preliminary design of a RC building located in a seismic area, having quick but reliable analytical measurement of interstory drifts and storey stiffnesses might be helpful in order to check the fulfillment of damage limit state and stiffness regularity in elevation required by seismic design codes. This paper presents two approximate methods, strongly interrelated each other, and addressed to achieve each of these two purposes for frame buildings. A brief description of some already existing methods addressed to the same aims is included to compare the main differences in terms of general approaches and assumptions. Both new approximate methods are then applied to 9 'ideal' frames and 2 'real' buildings designed according to the Italian seismic code. The results are compared with the 'exact' values obtained by the code-based standard calculation, performed via FEM models, showing a satisfactory range of accuracy. Compared with those by the other methods from literature, they indicate the proposed procedures lead to a better approximation of the objective structural parameters, especially for those buildings designed according to the modern 'capacity design' philosophy.

키워드

참고문헌

  1. Akkar, S., Gulkan, P. and Yazgan, U. (2004), "A simple procedure to compute the interstory drift for frame type structures", The 13th World Conference on Earthquake Engineering, Vancouver, paper No.2274.
  2. Akkar, S., Yazgan, U. and Gulkan, P. (2005), "Drift estimates in frame buildings subjected to near-fault ground motions", Journal of Structural Engineering, 113(7), 1014-1024.
  3. Ay, B.O. and Akkar, S. (2008), "A simplified procedure for estimating the inelastic drift demands on frame structures", The 14th World Conference on Earthquake Engineering, China.
  4. Cosenza, E., Maddaloni, G., Magliulo, G., Pecce, M. and Ramasco, R. (2005), Progetto Antisismico di Edifici in Cemento Armato, IUSS Press, Pavia. (in Italian)
  5. Dinh, T.V. and Ichinose, T. (2005), "Probabilistic estimation of seismic storey drifts in reinforced concrete buildings", Journal of Structural Engineering, 113(3), 416-427.
  6. Erdogan, B. (2007), "Simple models for drift estimates in framed structures during near-field earthquakes", Msc. Thesis, Graduate School of Natural and Applied Sciences, Middle East Technical University (METU).
  7. Eroglu, T. and Akkar, S. (2010), "Lateral stiffness estimation in frames and its implementation to continuum models for linear and nonlinear static analysis", Bulletin of Earthquake Engineering, 9(4), 1097-1114.
  8. Eurocode 8 (2003), Design for Structures for Earthquake Resistance, General Rules, Seismic Actions and Rules for Buildings, Part 1.
  9. FEMA-356 (2000), Prestandard and Commentary for the Seismic Rehabilitation of Buildings, Federal Emergency Management Agency, Washington D.C.
  10. Ghersi, A. (1986), Earthquake-resistant reinforced concrete frame buildings, CUEN, Naples.
  11. Gulkan, P. and Akkar, S. (2002), "A simple replacement for the drift spectrum", Journal of Engineering Structures, 24(11), 1477-1484. https://doi.org/10.1016/S0141-0296(02)00095-0
  12. Gupta, A. and Krawinkler, H. (2000), "Estimation of seismic drift demands for frame structures", Journal of Earthquake Engineering and Structural Dynamics, 29, 1287-1305. https://doi.org/10.1002/1096-9845(200009)29:9<1287::AID-EQE971>3.0.CO;2-B
  13. Heidebrecht, A.C. and Stafford Smith, B. (1973), "Approximate analysis of tall wall-frame structures", Journal of the Structural Division, 99(2), 199-221.
  14. Hosseini, M. and Imagh-e-Naiini, M.R. (1999), "A quick method for estimating the lateral stiffness of building systems", Journal of the Structural Design of Tall Buildings, 8, 247-260. https://doi.org/10.1002/(SICI)1099-1794(199909)8:3<247::AID-TAL126>3.0.CO;2-K
  15. Lam, N., Wilson, J. and Lumantarna, E. (2010), "Modelling of seismically induced storey-drift in buildings", Journal of Structural Engineering and Mechanics, 35(4), 459-478. https://doi.org/10.12989/sem.2010.35.4.459
  16. Lepage, A. (1996), "Seismic drift estimates for RC structures", The 11th World Conference on Earthquake Engineering, Mexico.
  17. Lin, Y. and Miranda, E. (2010), "Estimation of Maximum Roof Displacement Demands in Regular Multistory Buildings", Journal of Engineering Mechanic, 136(1), 1-11. https://doi.org/10.1061/(ASCE)0733-9399(2010)136:1(1)
  18. Matamoros, A., Browning, J. and Luft, M. (2003), "Evaluation of simple methods for estimating drift of reinforced concrete buildings subjected to earthquakes", Journal of Earthquake Spectra, 19(4), 839-861. https://doi.org/10.1193/1.1623781
  19. Miranda, E. (1999), "Approximate seismic lateral deformation demands in multistory buildings", Journal of Structural Engineering, 125(4), 417-425. https://doi.org/10.1061/(ASCE)0733-9445(1999)125:4(417)
  20. Miranda, E. and Reyes, C.J. (2002), "Approximate lateral deformation demands in multistory buildings with nonuniform stiffness", Journal of Structural Engineering, 128(7), 840-849. https://doi.org/10.1061/(ASCE)0733-9445(2002)128:7(840)
  21. Muto, K. (1965) Seismic Analysis of Reinforced Concrete Buildings, Shokoku-sha Publishing Co. Inc., Tokyo, Japan.
  22. OPCM 3274, Prime Minister Ordinance no. 3274 (2003), Technical rules for the design, evaluation and seismic retrofitting of buildings. (in Italian).
  23. Paulay, T. and Priestley, M.J.N. (1992) Seismic design of reinforced concrete and masonry buildings, John Wiley & Sons Inc., New York.
  24. Ramasco, R. (2000), Lecture notes of the course on buildings in seismic areas, University of Naples Federico II.
  25. SAP2000NL (2011), Static and Dynamic Finite Element Analysis of Structures, release 15.0, Computers and Structures Inc., Berkeley, CA.
  26. Schulz, A.E. (1992), "Approximating lateral stiffness of stories in elastic frames", Journal of Structural Engineering, 118(1), 243-263. https://doi.org/10.1061/(ASCE)0733-9445(1992)118:1(243)
  27. Takewaki, I. and Tsujimoto, H. (2011), "Scaling of design earthquake ground motions for tall buildings based on drift and input energy demands", Journal of Earthquakes and Structures, 2(2), 171-187. https://doi.org/10.12989/eas.2011.2.2.171
  28. Xie, J. and Wen, Z. (2008), "A measure of drift demand for earthquake ground motions based on Timoshenko beam model", The 14th World Conference on Earthquake Engineering, Beijing, China.
  29. Yong, Z., Su, R.K.L. and Fulin, Z. (2007), "Cursory seismic drift assessment for buildings in moderate seismicity regions", Journal of Earthquake Engineering and Engineering Vibration, 6(1), 85-97. https://doi.org/10.1007/s11803-007-0673-y

피인용 문헌

  1. Comparing calculation methods of storey stiffness to control provision of soft storey in seismic codes vol.11, pp.1, 2016, https://doi.org/10.12989/eas.2016.11.1.001
  2. Simplified assessment of maximum interstory drift for RC buildings with irregular infills distribution along the height pp.1573-1456, 2018, https://doi.org/10.1007/s10518-018-0473-y
  3. Identifying stiffness irregularity in buildings using fundamental lateral mode shape vol.12, pp.4, 2017, https://doi.org/10.12989/eas.2017.12.4.437
  4. Estimation of Inelastic Interstorey Drift for OSB/Gypsum Sheathed Cold-Formed Steel Structures under Collapse Level Earthquakes vol.2019, pp.None, 2013, https://doi.org/10.1155/2019/2896938
  5. Determination of the Dynamic Characteristics of Frame Structures with Non-uniform Shear Stiffness vol.44, pp.1, 2013, https://doi.org/10.1007/s40996-019-00235-5
  6. Seismic analysis of reinforced concrete buildings with participating masonry infills vol.14, pp.3, 2013, https://doi.org/10.1590/s1983-41952021000300015