DOI QR코드

DOI QR Code

Experimental and analytical investigation of high-strength concrete-filled steel tube square columns subjected to flexural loading

  • Chung, Kyung-Soo (Steel Structure Research Division, RIST) ;
  • Kim, Jin-Ho (Steel Structure Research Division, RIST) ;
  • Yoo, Jung-Han (School of Architecture, Seoul National University of Science &Technology)
  • 투고 : 2012.03.14
  • 심사 : 2013.01.19
  • 발행 : 2013.02.25

초록

The concrete-filled steel tube (CFT) columns have several benefits of high load-bearing capacity, inherent ductility and toughness because of the confinement effect of the steel tube on concrete and the restraining effect of the concrete on local buckling of steel tube. However, the experimental research into the behavior of square CFT columns consisting of high-strength steel and high-strength concrete is limited. Six full scale CFT specimens were tested under flexural moment. The CFT columns consisted of high-strength steel tubes ($f_y$ = 325 MPa, 555 MPa, 900 MPa) and high-strength concrete ($f_{ck}$ = 80 MPa and 120 MPa). The ultimate capacity of high strength square CFT columns was compared with AISC-LRFD design code. Also, this study was focused on investigating the effect of high-strength materials on the structural behavior and the mathematical models of the steel tube and concrete. Nonlinear fiber element analyses were conducted based on the material model considering the cyclic bending behavior of high-strength CFT members. The results obtained from the numerical analyses were compared with the experimental results. It was found that the numerical analysis results agree well with the experimental results.

키워드

과제정보

연구 과제 주관 기관 : Ministry of land, transport and maritime affairs

참고문헌

  1. Blanks, R.F., and McNamara, C.C. (1935), Mass concrete tests in large cylinders, ACI, 31, 280-303.
  2. Choi Y.H., Kim K.S. and Choi S.M. (2008), "Simplified P-M interaction curve for square steel tube filled with high-strength concrete". Thin-Walled structures, 46, 506-515. https://doi.org/10.1016/j.tws.2007.10.008
  3. Chung K.S., Chung J.A. and Choi S.M. (2007), "Prediction of pre- and post-peak behavior of concrete-filled square steel tube columns under cyclic loads using fiber element method", Thin-Walled structures, 45, 747-758. https://doi.org/10.1016/j.tws.2007.06.003
  4. Fujimoto T., Mukai, A., Nishiyama, I. and Sakino, K. (2004), "Behavior of eccentrically loaded concrete-filled steel tubular columns", J. of Struct. Eng., ASCE, 130, 203-212. https://doi.org/10.1061/(ASCE)0733-9445(2004)130:2(203)
  5. Han L.H., Yang Y.F. and Tao Z. (2003), "Concrete-filled thin-walled steel SHS and RHS beam-columns subjected to cyclic loading", Thin-Walled structures, 41(9), 801-833. https://doi.org/10.1016/S0263-8231(03)00030-2
  6. Hajjar J.F., Molodan A. and Schiller P.H. (1998), "A distributed plasticity model for cyclic analysis of concrete-filled steel tube beam-columns and composite frames", Eng. Struct., 20(4-6), 398-412 https://doi.org/10.1016/S0141-0296(97)00020-5
  7. Hajjar, J,F., Schiller, P.H. and Molodan, A.A. (1998), "A distributed plasticity model for concrete-filled steel tube beam-columns with interlayer slip", Eng. Struct., 20(8), 663-676 https://doi.org/10.1016/S0141-0296(97)00107-7
  8. Leon R.F. and Hajjar J.F. (2008), "Limit state response of composite columns and beam-columns Part II: application of design provisions for the 2005 AISC specification", Eng. J., 21-46.
  9. Liang Q.Q. (2009), "Strength and ductility of high strength concrete-filled steel tubular beam-columns", J. of Constr. Steel Res., 65(3),687-698. https://doi.org/10.1016/j.jcsr.2008.08.005
  10. Liang Q.Q., Uy B. and Liew R. (2006), "Nonlinear analysis of concrete-filled thin-walled steel box columns with local buckling effects", J. of Constr. Steel Res., 62(6), 581-591. https://doi.org/10.1016/j.jcsr.2005.09.007
  11. Liu D. (2006), "Behavior of eccentrically loaded high-strength rectangular concrete-filled steel tubular columns", J. of Constr. Steel Res., 62(8), 839-846. https://doi.org/10.1016/j.jcsr.2005.11.020
  12. Liu D. and Gho W.M. (2005), "Axial load behavior of high-strength rectangular concrete-filled steel tubular stub columns", Thin-Walled struct., 43(8),1131-1142. https://doi.org/10.1016/j.tws.2005.03.007
  13. Liu D., Gho W.M. and Yuan J. (2003), "Ultimate capacity of high-strength rectangular concrete-filled steel hollow section stub columns", J. of Constr. Steel Res., 59(12), 1499-1515. https://doi.org/10.1016/S0143-974X(03)00106-8
  14. Mander JB, Priestley MJN, and Park R. (1988), "Theoretical stress-strain model for confined concrete", J. of Struct. Eng., ASCE, 114(8), 1807-26.
  15. Nakahara H., Sakino K., and Inai E. (1998), "Analytical model for axial compressive behavior of concrete filled square steel tubular columns", Transaction of the Japan Concrete Institute, 20, 171-178 (In Japanese)
  16. Uy B. (2001a) , "Strength of short concrete filled high strength steel box columns", J. of Constr. Steel Res., 57(2), 113-134. https://doi.org/10.1016/S0143-974X(00)00014-6
  17. Uy B. (2001b) , "Axial compressive strength of short steel and composite columns fabricated with high strength steel plate", Steel. Compos. Struct., 1(2), 171-185. https://doi.org/10.12989/scs.2001.1.2.171
  18. Mursi M. and Uy B. (2004), "Strength of slender concrete filled high strength steel box columns", J. of Constr. Steel Res., 60(12), 1825-1848. https://doi.org/10.1016/j.jcsr.2004.05.002
  19. Mursi M. and Uy B. (2006a) , "Behavior and design of fabricated high strength steel columns subjected to biaxial bending. Part 1: Experiments, International Journal of Advanced Steel Construction", Hong Kong Institute of Steel Construction, 2(4), 286-315.
  20. Mursi M. and Uy B. (2006b) , "Behavior and design of fabricated high strength steel columns subjected to biaxial bending. Part 2: Analysis and design codes, International Journal of Advanced Steel Construction", Hong Kong Institute of Steel Construction, 2(4), 316-354.
  21. Varma A.H., Ricles J.M., Sause R. and Lu L.W. (2002), "Experimental behavior of high strength square concrete-filled steel tube beam-columns", J. of Struct. Eng. ASCE, 128(3), 309-318. https://doi.org/10.1061/(ASCE)0733-9445(2002)128:3(309)
  22. Varma A.H., Ricles J.M., Sause R. and Lu L.W. (2004), "Seismic behavior and design of high-strength square concrete-filled steel tube beam columns", J. of Struct. Eng. ASCE, 130(2), 169-179. https://doi.org/10.1061/(ASCE)0733-9445(2004)130:2(169)
  23. Yamada S., Akiyama H. and Kuwamura H. (1993), "Post-buckling and deteriorating behavior of box-section steel members", J. of Struct. Constr. Eng. AIJ 444, 135-143. (In Japanese)
  24. Zhang W. and Shahrooz B.M. (1997), "Analytical and experimental studies into behavior of concrete-filled tubular columns", Report no. UC-CII 97/01, College of Engineering, Cincinnati Infrastructure Institute, University of Cincinnati, OH.

피인용 문헌

  1. Wave propagation in a concrete filled steel tubular column due to transient impact load vol.17, pp.6, 2014, https://doi.org/10.12989/scs.2014.17.6.891
  2. Flexural performance of concrete filled tubes with high tensile steel and ultra-high strength concrete vol.132, 2017, https://doi.org/10.1016/j.jcsr.2017.01.017
  3. Long-term structural analysis and stability assessment of three-pinned CFST arches accounting for geometric nonlinearity vol.20, pp.2, 2016, https://doi.org/10.12989/scs.2016.20.2.379
  4. Flexural behavior of high strength concrete filled high strength square steel tube vol.128, 2017, https://doi.org/10.1016/j.jcsr.2016.10.007
  5. Experimental behavior of circular flyash-concrete-filled steel tubular stub columns vol.22, pp.4, 2016, https://doi.org/10.12989/scs.2016.22.4.821
  6. Experimental Research on Seismic Performance of Four-Element Variable Cross-Sectional Concrete Filled Steel Tubular Laced Columns vol.250, 2017, https://doi.org/10.1088/1757-899X/250/1/012039
  7. Vertical Dynamic Response of a Concrete Filled Steel Tube due to Transient Impact Load: Analytical Solution vol.16, pp.01, 2016, https://doi.org/10.1142/S0219455416400149
  8. Calculation Method on Capacity of Eccentrically Loaded Square Steel Tube Columns Filled with Steel Reinforced Concrete vol.255-260, pp.1662-8985, 2011, https://doi.org/10.4028/www.scientific.net/AMR.255-260.457
  9. Study on rectangular concrete-filled steel tubes with unequal wall thickness vol.22, pp.5, 2013, https://doi.org/10.12989/scs.2016.22.5.1073
  10. Anchored blind bolted composite connection to a concrete filled steel tubular column vol.23, pp.1, 2013, https://doi.org/10.12989/scs.2017.23.1.115
  11. Behavior of fibre reinforced cementitious material-filled steel tubular columns vol.23, pp.4, 2017, https://doi.org/10.12989/scs.2017.23.4.465
  12. A constitutive model for confined concrete in composite structures vol.24, pp.6, 2017, https://doi.org/10.12989/scs.2017.24.6.689
  13. Seismic response assessment of high-strength concrete frames strengthened with carbon fiber reinforced polymers vol.77, pp.6, 2013, https://doi.org/10.12989/sem.2021.77.6.735