DOI QR코드

DOI QR Code

Microfiltration of Chlorella sp.: Influence of material and membrane pore size

  • Ahmad, A.L. (School of Chemical Engineering, Engineering Campus, Universiti Sains Malaysia) ;
  • Yasin, N.H. Mat (School of Chemical Engineering, Engineering Campus, Universiti Sains Malaysia) ;
  • Derek, C.J.C. (School of Chemical Engineering, Engineering Campus, Universiti Sains Malaysia) ;
  • Lim, J.K. (School of Chemical Engineering, Engineering Campus, Universiti Sains Malaysia)
  • Received : 2012.08.08
  • Accepted : 2013.04.01
  • Published : 2013.04.25

Abstract

Four membranes were used to separate Chlorella sp. from their culture medium in cross-flow microfiltration (MF) experiments: cellulose acetate (CA), cellulose nitrate (CN), polypropylene (PP) and polyvinylidenefluoride (PVDF). It was found that the hydrophilic CA and CN membranes with a pore size of 1.2 ${\mu}m$ exhibited the best performances among all the membranes in terms of permeation flux. The hydrophobicity of each membrane material was determined by measuring the angle between the water (liquid) and membrane (solid). Contact angle measurements showed that deionized (DI) water had almost adsorbed onto the surfaces of the CA and CN membranes, which gave $0.00^{\circ}$ contact angle values. The PP and PVDF membranes were more hydrophobic, giving contact angle values of $95.97^{\circ}$ and $126.63^{\circ}$, respectively. Although the pure water flux increased with increasing pore diameter (0.8 < 1.2 < 3.0 ${\mu}m$) in hydrophilic CA and CN membranes, the best performance in term of filtration rate for filtering a microalgae suspension was attained by membranes with a pore size of 1.2 ${\mu}m$. The fouled membrane pore sizes and pore blocking were inspected using a scanning electron microscope (SEM). MF with large pore diameters was more sensitive to fouling that contributed to intermediate blocking, where the size of the membrane pores is almost equivalent to that of cells.

Keywords

References

  1. Ahmad, A.L., Mat Yasin, N.H., Derek, C.J.C. and Lim, J.K. (2011), "Optimization of microalgae coagulation process using chitosan", Chem. Eng. J., 173(3), 879-882. https://doi.org/10.1016/j.cej.2011.07.070
  2. Ahmad, A.L., Mat Yasin, N.H., Derek, C.J.C. and Lim, J.K. (2012), "Crossflow microfiltration of microalgae biomass for biofuel production", Desalination, 302, 65-70. https://doi.org/10.1016/j.desal.2012.06.026
  3. Ahmad, A.L., Sunarti, A.R., Lee, K.T. and Fernando, W.J.N. (2010), "$CO_{2}$ removal using membrane gas absorption", I.J. Greenhouse Gas Control, 4, 495-498. https://doi.org/10.1016/j.ijggc.2009.12.003
  4. Babel, S. and Takizawa, S. (2010), "Microfiltration membrane fouling and cake behavior during algal filtration", Desalination, 261, 46-51. https://doi.org/10.1016/j.desal.2010.05.038
  5. Dizge, N., Soydemir, G., Karagunduz, A. and Keskinler, B. (2011), "Influence of type and pore size of membranes on cross flow microfiltration of biological suspension", J. Membrane Science, 366(1-2), 278-285. https://doi.org/10.1016/j.memsci.2010.10.010
  6. Field, R.W., Wu, D., Howell, J.A. and Gupta, B.B. (1995), "Critical flux concept for microfiltration fouling", J. Membrane Science, 100, 259-272. https://doi.org/10.1016/0376-7388(94)00265-Z
  7. Gekas, V., Persson, K.M., Wablgren, M. and Sivik, B. (1992), "Contact angles of ultrafiltration membranes and their possible correlation to membrane performance", J. Membrane Science, 72, 293-302. https://doi.org/10.1016/0376-7388(92)85056-O
  8. Ho, C-C. and Zydney, A.L. (1999), "Effect of membrane morphology on the initial rate of protein fouling during microfiltration", J. Membrane Science, 155, 261-275. https://doi.org/10.1016/S0376-7388(98)00324-X
  9. Hwang, K-J. and Huang, P-S. (2009), "Cross-flow microfiltration of dilute macromolecular suspension", Separation and Purification Technology, 68, 328-334. https://doi.org/10.1016/j.seppur.2009.05.022
  10. Hwang, K-J. and Lin, T-T. (2002), "Effect of morphology of polymeric membrane on the performance of cross-flow microfiltration", J. Membrane Science, 199, 41-52. https://doi.org/10.1016/S0376-7388(01)00675-5
  11. Hwang, K-J. and Sz, P-Y. (2010), "Filtration characteristics and membrane fouling in cross-flow microfiltration of BSA/dextran binary suspension", J. Membrane Science, 347, 75-82. https://doi.org/10.1016/j.memsci.2009.10.008
  12. Jaouen, P., Vandanjon, L. and Quemeneur, F. (1999), "The shear stress of microalgal cell suspensions (Tetraselmis suecica) in tangential flow filtration systems: the role of pumps", Desalination, 68, 149-154.
  13. Jonsson, C. and Jonsson, A-S. (1995), "Influence of the membrane material on the adsorptive fouling of ultrafiltration membranes", J. Membrane Science, 108, 79-87. https://doi.org/10.1016/0376-7388(95)00144-X
  14. Jung, C-W., Son, H-J. and Kang, L-S. (2006), "Effects of membrane material and pretreatment coagulation on membrane fouling: fouling mechanism and NOM removal", Desalination, 197, 154-164. https://doi.org/10.1016/j.desal.2005.12.022
  15. Krstic, D.M., Markov, S.L. and Tekic, M.N. (2001), "Membrane fouling during cross-flow microfiltration of Polyporus squamosus fermentation broth", Biochem. Eng. J., 9, 103-109. https://doi.org/10.1016/S1369-703X(01)00133-4
  16. Lim, J. K., Derek, C.J.C., Jalak, S.A., Toh, P.Y., Mat Yasin, N.H., Ng, B.W. and Ahmad, A.L. (2012), "Rapid magnetophoretic separation of microalgae", Small, 8(11), 1683-1692. https://doi.org/10.1002/smll.201102400
  17. Makardij, A., Chen, X.D. and Farid, M.M. (1999), "Microfiltration and ultrafiltration of milk: Some aspects of fouling and cleaning", Trans IChemE Part C, 77, 107-113. https://doi.org/10.1205/095758299529910
  18. Masselin, I., Durand-Bourlier, L., Laine, J.M., Chassray, P.Y. and Lemordant, D. (2001), "Membrane characteristic using microscopic image analysis", J. Membrane Science, 186, 85-96. https://doi.org/10.1016/S0376-7388(00)00657-8
  19. Mulder, M. (1996), Basic Principles of Membrane Technology, 2nd edition, Kluwer Academic Publishers, Dordrecht, The Netherlands, pp. 427.
  20. Pearce, G. (July-August 2007), "Introduction to membranes: Fouling control", Filtration & Separation, 44(6), 30-32.
  21. Petrusevski, B., Bolier, G., Van Breemen, A.N. and Alaerts, G.J. (1995), "Tangential flow filtration: A method to concentrate freshwater algae", Wat. Res., 29(5), 1419-1424. https://doi.org/10.1016/0043-1354(94)00269-D
  22. Rossi, N., Derouiniot-Chaplain, M., Jaouen, P., Legentilhomme, P. and Petit, I. (2008), "Arthrospira platensis harvesting with membranes: Fouling phenomenon with limiting and critical flux", Bioresource Technology, 99, 6162-6167 https://doi.org/10.1016/j.biortech.2007.12.023
  23. Rossi, N., Jaouen, P., Legentilhomme, P. and Petit, I. (2004), "Harvesting of Cyanobacterium arthrospira platensis using organic filtration membranes", Food Bioproducts Processing, 82, 244-250. https://doi.org/10.1205/fbio.82.3.244.44177
  24. Rossignol, N., Vandanjon, L., Jaouen, P. and Quemeneur F. (1999), "Membrane technology for the continuous separation microalgae/culture medium: compared performances of cross-flow microfiltration and ultrafiltration", Aquacultural Engineering, 20, 191-208. https://doi.org/10.1016/S0144-8609(99)00018-7
  25. Vaisanen, P., Bird, M.R. and Nystrom, M. (2002), "Treatment of UF membranes with simple and formulated cleaning agents", Trans IChemE Part C, 80, 98-108.

Cited by

  1. Synthesis and characterization of PEG-Ag immobilized PES hollow fiber ultrafiltration membranes with long lasting antifouling properties vol.454, 2014, https://doi.org/10.1016/j.memsci.2013.12.050
  2. The fouling effects of microalgal cells on crossflow membrane filtration vol.499, 2016, https://doi.org/10.1016/j.memsci.2015.10.043
  3. Preparation and characterisation of novel polysulfone membranes modified with Pluronic F-127 for reducing microalgal fouling vol.71, pp.7, 2017, https://doi.org/10.1007/s11696-016-0120-5
  4. Chemical cleaning of a cross-flow microfiltration membrane fouled by microalgal biomass vol.45, pp.1, 2014, https://doi.org/10.1016/j.jtice.2013.06.018
  5. Kinetic studies and thermodynamics of oil extraction and transesterification ofChlorellasp. for biodiesel production vol.35, pp.7, 2014, https://doi.org/10.1080/09593330.2013.855263
  6. Comparison of harvesting methods for microalgaeChlorellasp. and its potential use as a biodiesel feedstock vol.35, pp.17, 2014, https://doi.org/10.1080/09593330.2014.900117
  7. Harvesting microalgal biomass using crossflow membrane filtration: critical flux, filtration performance, and fouling characterization vol.38, pp.12, 2017, https://doi.org/10.1080/09593330.2016.1237560
  8. Harvesting of microalgae via submerged membranes: flux, fouling and its reversibility vol.8, pp.5, 2013, https://doi.org/10.12989/mwt.2017.8.5.499