DOI QR코드

DOI QR Code

An analytical technique for estimation of seismic displacements in reinforced slopes based on horizontal slices method (HSM)

  • 투고 : 2011.12.07
  • 심사 : 2013.02.08
  • 발행 : 2013.04.25

초록

Calculation of seismic displacements in reinforced slopes plays a crucial role in appropriate design of these structures however current analytical methods result indifferent values for permanent displacements of the slope. In this paper, based on limit equilibrium and using the horizontal slices method, a new formulation has been proposed for estimating the seismic displacements of a reinforced slope under earthquake records. In this method, failure wedge is divided into a number of horizontal slices. Assuming linear variations for tensile forces of reinforcements along the height of the slope, the coefficient of yield acceleration has been estimated. The simplicity of calculations and taking into account the frequency content of input triggers are among the advantages of the present formulation. Comparison of the results shows that the yield acceleration calculated by the suggested method is very close to the values resulted from other techniques. On the other hand, while there is a significant difference between permanent displacements, the values obtained from the suggested method place somehow between those calculated by the other techniques.

키워드

참고문헌

  1. Ahmad, S.M. and Choudhury, D. (2008), "Pseudo-dynamic approach of seismic design for waterfront reinforced soil wall", Geotex. Geomemb., 26(4), 291-301. https://doi.org/10.1016/j.geotexmem.2007.12.004
  2. Ahmadabadi, M. and Ghanbari, A. (2009), "New procedure for active earth pressure calculation in retaining walls with reinforced cohesive-frictional backfill", Geotex. Geomemb., 27(6), 456-463. https://doi.org/10.1016/j.geotexmem.2009.06.004
  3. Al-Hattamleh, O. and Muhunthan, B. (2006), "Numerical procedures for deformation calculations in reinforced soil walls", Geotex. Geomemb., 24(1), 52-57. https://doi.org/10.1016/j.geotexmem.2005.07.001
  4. Ausilio, E., Conte, E. and Dente, E. (2000), "Seismic stability analysis of reinforced slopes", Soil Dyn. Earthq. Eng., 19(3), 159-172. https://doi.org/10.1016/S0267-7261(00)00005-1
  5. Baker, R. and Klein, Y. (2004a), "An integrated limiting equilibrium approach for design of reinforced soil retaining structures, Part I: formulation", Geotex. Geomemb., 22(3), 119-150. https://doi.org/10.1016/j.geotexmem.2003.10.002
  6. Baker, R. and Klein, Y. (2004b), "An integrated limiting equilibrium approach for design of reinforced soil retaining structures, Part III: optimal design", Geotex. Geomemb., 22(6), 455-479. https://doi.org/10.1016/j.geotexmem.2004.04.001
  7. Bathurst, R.J. and Alfaro, M.C. (1996), "Review of seismic design, analysis and performance of geosynthetic reinforced walls, slopes and embankments", Proceedings of the International Symposium, Fukuoka, Kyushu, Japan, November.
  8. Bathurst, R.J., Allen, T.M. and Walters, D.L. (2005), "Reinforcement loads in geosynthetic walls and the case for a new working stress design method", Geotex. Geomemb., 23(4), 287-322. https://doi.org/10.1016/j.geotexmem.2005.01.002
  9. Cai, Z. and Bathurst, R.J. (1996), "Deterministic sliding block methods for estimating seismic displacements of earth structures", Soil Dyn. Earthq. Eng., 15(4), 255-268. https://doi.org/10.1016/0267-7261(95)00048-8
  10. Chen, H.T., Hung, W.Y., Chang, C.C., Chen, Y.J. and Lee, C.J. (2007), "Centrifuge modeling test of a geotextile-reinforced wall with a very wet clayey backfill", Geotex. Geomemb., 25(6), 346-359. https://doi.org/10.1016/j.geotexmem.2007.01.003
  11. Chen, T.C., Chen, R.H. and Lin, S.S. (2000), "A nonlinear homogenized model applicable to reinforced soil analysis", Geotex. Geomemb., 18(6), 349-366. https://doi.org/10.1016/S0266-1144(99)00035-7
  12. Collin, J.G. (2001), "Lessons learned from a segmental retaining wall failure", Geotex. Geomemb., 19(7), 445-454. https://doi.org/10.1016/S0266-1144(01)00016-4
  13. El-Emam, M.M. and Bathurst, R.J. (2007), "Influence of reinforcement parameters on the seismic response of reduced-scale reinforced soil retaining walls", Geotex. Geomemb., 25(1), 33-49. https://doi.org/10.1016/j.geotexmem.2006.09.001
  14. Garg, K.G. (1998), "Retaining wall with reinforced backfill: A case study", Geotex. Geomemb., 16(3), 135-149. https://doi.org/10.1016/S0266-1144(98)00003-X
  15. Ghanbari, A. and Ahmadabadi, M. (2010a), "Pseudo-dynamic active earth pressure analysis of inclined retaining walls using horizontal slices method", Scientia Iranica, Transact. A: Civil Eng., 17(2), 118-130.
  16. Ghanbari, A. and Ahmadabadi, M. (2010b), "Active earth pressure on inclined retaining walls in static and pseudo-static conditions", Int'l J. Civil Eng., 8(2), 159-173.
  17. Ghanbari, A. and Ahmadabadi, M. (2010c), "New analytical procedure for seismic analysis of reinforced retaining wall with cohesive-frictional backfill", Geosynth. Int'l, 17(6), 364-379. https://doi.org/10.1680/gein.2010.17.6.364
  18. Ghanbari, A. and Taheri, M. (2012), "An analytical method for calculating active Earth pressure in reinforced retaining walls subject to a line surcharge", Geotex. Geomemb., 34, 1-10. https://doi.org/10.1016/j.geotexmem.2012.02.009
  19. Gnanapragasam, G. (2000), "Active earth pressure in cohesive soils with an inclined ground surface", Can. Geotech. J., 37(1), 171-177. https://doi.org/10.1139/t99-091
  20. Hatami, K. and Bathurst, R.J. (2000), "Effect of structural design on fundamental frequency of reinforced-soil retaining walls", Soil Dyn. Earthq. Eng., 19(3), 137-157. https://doi.org/10.1016/S0267-7261(00)00010-5
  21. Huang, C.C. and Wu, S.H. (2006), "Simplified approach for assessing seismic displacements of soil retaining walls, Part I: geosynthetic-reinforced modular block walls", Geosynthetics International, 13(6), 219-233. https://doi.org/10.1680/gein.2006.13.6.219
  22. Huang, C.C., Chou, L.H. and Tatsouka, F. (2003), "Seismic displacement of geosynthetic reinforced soil modular block walls", Geosynth. Int'l, 10(1), 2-23. https://doi.org/10.1680/gein.2003.10.1.2
  23. Huang, C.C. and Wang, W.C. (2005), "Seismic displacement charts for the performance based assessment of reinforced soil walls", Geosynth. Int'l, 12(4), 176-190. https://doi.org/10.1680/gein.2005.12.4.176
  24. Huang, C.C. and Wu, S.H. (2007), "Simplified approach for assessing seismic displacements of soil retaining walls, Part II: geosynthetic-reinforced walls with rigid panel facing", Geosynth. Int'l, 14(5), 264-276. https://doi.org/10.1680/gein.2007.14.5.264
  25. Huang, Y., Sawada, K., Moriguchi, S., Yashima, A. and Zhang, F. (2006), "Numerical assessment of the effect of reinforcement on the performance of reinforced soil dikes", Geotex. Geomemb., 24(3), 169-174. https://doi.org/10.1016/j.geotexmem.2005.11.005
  26. Jahanandish, M. and Keshavarz, A. (2005), "Seismic bearing capacity of foundations on reinforced soil slopes", Geotex. Geomemb., 23(1), 1-25. https://doi.org/10.1016/j.geotexmem.2004.09.001
  27. Kazimierowicz-Frankowska, K. (2005), "A case study of a geosynthetic reinforced wall with wrap-around facing", Geotex. Geomemb., 23(1), 107-115. https://doi.org/10.1016/j.geotexmem.2004.05.001
  28. Kramer, S.L. and Paulsen, S.B. (2004), "Seismic performance evaluation of reinforced slopes", Geosynth. Int'l, 11(6), 429-438. https://doi.org/10.1680/gein.2004.11.6.429
  29. Latha, G.M. and Krishna, A.M. (2008), "Seismic response of reinforced soil retaining wall models: influence of backfill relative density", Geotex. Geomemb., 26(4), 335-349. https://doi.org/10.1016/j.geotexmem.2007.11.001
  30. Lee, K.Z.Z. and Wu, J.T.H. (2004), "A synthesis of case histories on GRS bridge-supporting structures with flexible facing", Geotex. Geomemb., 22(4), 181-204. https://doi.org/10.1016/j.geotexmem.2004.03.002
  31. Ling, H.I., Leshchinsky, D. and Chou, N.N.S. (2001), "Post-earthquake investigation on several geosynthetic-reinforced soil retaining walls and slopes during 1999 Ji-Ji earthquake of Taiwan", Soil Dyn. Earthq. Eng., 21(4), 297-313. https://doi.org/10.1016/S0267-7261(01)00011-2
  32. Ling, H.I., Leshchinsky, D. and Perry, E.B. (1997), "Seismic design and performance of geosynthetic -reinforced soil structures", Geotech., 47(5), 933-952. https://doi.org/10.1680/geot.1997.47.5.933
  33. Michalowski, R.L. and You, L. (2000), "Displacement of reinforced slopes subjected to seismic loads", J. Geotech. Geoenviron. Eng., 126(8), 685-694. https://doi.org/10.1061/(ASCE)1090-0241(2000)126:8(685)
  34. Mojallal, M. and Ghanbari, A. (2012), "Prediction of seismic displacements in gravity retaining walls based on limit analysis approach", Struct. Mech. Int'l J., 42(2), 247-267.
  35. Mojallal, M., Ghanbari, A. and Askari, F. (2012), "A new analytical method for calculating seismic displacements in reinforced retaining walls", Geosynth. Int'l, 19(3), 212-231. https://doi.org/10.1680/gein.2012.12.00010
  36. Newmark, N.M. (1965), "Effects of earthquakes on dams and embankments", Geotech., 15(2), 139-159. https://doi.org/10.1680/geot.1965.15.2.139
  37. Nouri, H., Fakher, A. and Jones, C.J.F.P. (2006), "Development of horizontal slices method for seismic stability analysis of reinforced slopes and walls", Geotex. Geomemb., 24, 175-187. https://doi.org/10.1016/j.geotexmem.2005.11.004
  38. Nouri, H., Fakher, A. and Jones, C.J.F.P. (2008), "Evaluating the effects of the magnitude and amplification of pseudo-static acceleration on reinforced soil slopes and walls using the limit equilibrium horizontal slices method", Geotex. Geomemb., 26(3), 263-278. https://doi.org/10.1016/j.geotexmem.2007.09.002
  39. Porbaha, A., Zhao, A., Kobayashi, M. and Kishida, T. (2000), "Upper bound estimate of scaled reinforced soil retaining walls", Geotex. Geomemb., 18(6), 403-413. https://doi.org/10.1016/S0266-1144(99)00036-9
  40. Reddy, G.V.N., Madhav, M.R. and Reddy, E.S. (2008), "Pseudo-static seismic analysis of reinforced soil wall: effect of oblique displacement", Geotex. Geomemb., 26(5), 393-403. https://doi.org/10.1016/j.geotexmem.2008.02.002
  41. Richards, R. and Elms, D.G. (1979), "Seismic behavior of gravity retaining walls", J. Geotech. Eng., ASCE, 105(4), 449-469.
  42. Rowe, R.K. and Skinner, G.D. (2001), "Numerical analysis of geosynthetic reinforced retaining wall constructed on a layered soil foundation", Geotex. Geomemb., 19(7), 387-412. https://doi.org/10.1016/S0266-1144(01)00014-0
  43. Sabermahani, M., Ghalandarzadeh A. and Fakher A. (2008), "Experimental study on seismic deformation modes of reinforced-soil walls", Geotex. Geomemb., 27, 121-136.
  44. Sandri, D. (1997), "A summary of reinforced soil structures performance in the greater Los Angeles area after the Northridge earthquake", Wu, J.T.H. (Ed.), Mech. Stabil. Backfill, Balkema, Rotterdam, 433-442.
  45. Shahgholi, M. (1999), "Design of reinforced soil walls against earthquake", M.Sc. Thesis, University of Tehran, Tehran, Iran.
  46. Shekarian, S., Ghanbari, A. and Farhadi, A. (2008), "New seismic parameters in the analysis of retaining walls with reinforced backfill", Geotex. Geomemb., 26(4), 350-356. 0266-1144. https://doi.org/10.1016/j.geotexmem.2008.01.003
  47. Skinner, G.D. and Rowe, R.K. (2005), "Design and behavior of a geosynthetic reinforced retaining wall and bridge abutment on a yielding foundation", Geotex. Geomemb., 23(3), 234-260. https://doi.org/10.1016/j.geotexmem.2004.10.001
  48. Tatsuoka, F., Koseki, J. and Tateyama, M. (1997), "Performance of reinforced soil structures during the 1995 Hyogo-ken Nambu earthquake", Ochiai, H., Yasufuku, N. and Omine, K. (Eds.), Earth Reinforce. Balkema, Rotterdam, 979-1008.
  49. Tatsuoka, F., Tateyama, M. and Koseki, J. (1995), "Behavior of geogrid-reinforced soil retaining walls during the great Hanshin-Awaji earthquake", Proceeding of the 1st International Symposium of Earthquake Geotechnical Engineering, 19(2), 55-60.
  50. White, D. and Holtz, R.D. (1997), "Performance of geosynthetic reinforced slopes and walls during the Northridge California earthquake of January 17, 1994", Ochiai, H., Yasufuku, N. and Omine, K. (Eds.), Earth Reinforce. Balkema, Rotterdam, 965-972.
  51. Won, M.S. and Kim, Y.S. (2007), "Internal deformation behavior of geosynthetic-reinforced soil walls", Geotex. Geomemb., 25(1), 10-22. https://doi.org/10.1016/j.geotexmem.2006.10.001
  52. Yoo, C. (2004), "Performance of a 6-year-old geosynthetic-reinforced segmental retaining wall", Geotex. Geomemb., 22(5), 377-397. https://doi.org/10.1016/j.geotexmem.2003.12.001
  53. Yoo, C. and Jung, H.S. (2004), "Measured behavior of a geosynthetic-reinforced segmental retaining wall in a tiered configuration", Geotex. Geomemb., 22(5), 359-376. https://doi.org/10.1016/S0266-1144(03)00064-5
  54. Zarnani, S., El-Emam, M.M. and Bathurst, R.J. (2011), "Comparison of numerical and analytical solutions for reinforced soil wall shaking table tests", Geomech. Eng., 3(4), 291-321. https://doi.org/10.12989/gae.2011.3.4.291
  55. Zornberg, J.G., Sitar, N. and Mitchell, J.K. (1998), "Limit equilibrium as basis for design of geosynthetic reinforced slopes", J. Geotech. Geoenviron. Eng., ASCE, 124(8), 684-698. https://doi.org/10.1061/(ASCE)1090-0241(1998)124:8(684)

피인용 문헌

  1. A new analytical model to determine dynamic displacement of foundations adjacent to slope vol.6, pp.6, 2014, https://doi.org/10.12989/gae.2014.6.6.561
  2. A 3D Analytical Approach for Determining Natural Frequency of Retaining Walls vol.15, pp.3, 2017, https://doi.org/10.1007/s40999-017-0192-9
  3. Yield acceleration of reinforced soil slopes 2020, https://doi.org/10.1080/19386362.2017.1404736
  4. Predicting seismic permanent displacement of soil walls under surcharge based on limit analysis approach vol.17, pp.4, 2018, https://doi.org/10.1007/s11803-018-0473-6
  5. Investigation of the effect of surcharge on behavior of soil slopes vol.13, pp.4, 2017, https://doi.org/10.12989/gae.2017.13.4.653
  6. The effect of foundation soil behavior on seismic response of long bridges vol.17, pp.6, 2013, https://doi.org/10.12989/gae.2019.17.6.583
  7. Probabilistic bearing capacity of strip footing on reinforced anisotropic soil slope vol.23, pp.1, 2020, https://doi.org/10.12989/gae.2020.23.1.015