DOI QR코드

DOI QR Code

디메틸에테르에 첨가된 윤활성향상제의 윤활특성에 관한 연구

Study on Lubrication Characteristics of Lubrication for Lubricity Improver in Dimethyl Ether

  • 박천규 (충북대학교 화학공학과) ;
  • 장은정 (한국석유관리원 석유기술연구소) ;
  • 정충섭 (한국석유관리원 석유기술연구소) ;
  • 이봉희 (충북대학교 화학공학과) ;
  • 나병기 (충북대학교 화학공학과)
  • Park, Cheonkyu (Department of Chemical Engineering, Chungbuk National University) ;
  • Jang, Eunjung (Korea Institute of Petroleum Management) ;
  • Jung, Choongsub (Korea Institute of Petroleum Management) ;
  • Lee, Bonghee (Department of Chemical Engineering, Chungbuk National University) ;
  • Na, Byungki (Department of Chemical Engineering, Chungbuk National University)
  • 투고 : 2012.11.20
  • 심사 : 2013.01.17
  • 발행 : 2013.04.30

초록

Dimethyl ether (DME) has a high cetane number that is suitable for diesel fuel. DME does not contain sulfur or nitrogen, and is an oxygenated fuel so it produces no particulate matter when combusted and is environmentally friendly. DME fuel for diesel engines show excellent material properties such as a lower volumetric heating value, lower boiling point, lower lubricity, and stronger solvent effect than light oil. This study experimentally examined a lubricity improver (LI) for dimethyl ether. A diesel LI based on biodiesel and fatty acid methyl ester was tested among DME LI candidates. The long-term storage stability and physical properties of the optimum LI for DME were determined.

키워드

참고문헌

  1. Youngduk Pyo, et al. "A Study on Performance and Exhaust Emissions of DI Diesel Engine Operated with Neat DME and DME Blends Fuels," Transaction of the Korean Society of Automotive Engineers, Vol. 11, No. 2, pp. 75-82, 2003.
  2. Y. J. Lee, "Dimethyl Ether as Alternative Diesel Fuel," Journal of KSAE, Vol. 23, No. 2, pp. 43-49, 2001.
  3. S.G. An., M.Y. Kim, S.H. Yoon, J.H. Lee and C.S. Lee., "Combustion and Exhaust Emission Characteristics of DME in a Common-rail Diesel Engine," Transactions of KSAE, Vol. 15, No. 2, pp. 74-80, 2007.
  4. F. Maroteaux, G. Descombes and F. Sauton, "Performance and Exhaust Emissions of a Diesel Engine running with DME," 2001 ICE Spring Technical Conference, Vol. 1, pp. 73-81, 2001.
  5. 최웅수, "윤활제 및 첨가제의 응용," 유체기계저널, 제9권, 제5호, pp. 42-49, 2006.
  6. K. Jung, J. Choi, S. Moon and K. Chung, "A Study on Friction and Wear Characteristics of Nano-size Carbon," Journal of KSTLE, Vol. 24, No. 5, pp. 264- 268, 2008.
  7. J. H. Kim, S.C. Kang, K.W. Jung, W. Cho, and D. Han, "A Study on Synthesis and Wear Characteristics of Mo-DTP as Lubricant Additive," Journal of KSTLE, Vol. 5, No. 1, pp. 57-63, 1989.
  8. W.D. Kim, D.K. Kim and Y.J. Chung, "Extreme Pressure Characteristics of Molybdenum Di-n-butoxydithiophosphate," J. Korean End. Eng. Chem., Vol. 13, No. 2, pp. 162-165, 2002.