DOI QR코드

DOI QR Code

The Minimum Lap-spliced Length of the Reinforcement in the Steam Curing UHPC Bridge Deck Slab Joint

UHPC 바닥판 증기양생 현장이음부의 최소철근겹침이음길이

  • 황훈희 (한국도로교통협회 기술국 구조교량팀) ;
  • 박성용 (한국건설기술연구원 SOC성능연구소 인프라구조연구실)
  • Received : 2013.02.04
  • Accepted : 2013.04.15
  • Published : 2013.04.30

Abstract

The static test was performed to verify the effect of the joint in the UHPC bridge deck slab and the minimum lap-spliced length was presented. A total of six test members was fabricated to estimate the static behavior of the steam curing UHPC bridge deck slab joint by the four points bending test method. The lap-spliced joint type was expected to be not only simple but also efficient in UHPC structure because of the high bond stress of UHPC. Test results show that the decrease of maximum flexural strength was about 30% and the minimum lap-spliced length which behaved similar to the continued reinforcement in strength and ductility was 150 mm.

이 연구에서는 이음부가 초고성능콘크리트 교량 바닥판의 정적 거동에 미치는 영향을 실험적으로 규명하고, 이음부 철근의 최소겹침이음길이를 제안하였다. 총 6개의 실험부재를 제작하였으며 4점 휨 실험에 의하여 성능을 평가하였다. 이음부는 UHPC의 높은 부착특성으로 인하여 단순하면서도 매우 효율적인 구조가 될 것으로 기대되는 철근겹침이음을 대상으로 하였다. 실험결과로부터 이음부의 설치에 의한 UHPC의 인장기여도 감소에 따라 약 30% 수준의 휨강도 감소가 발생되는 것으로 측정되었고, 150 mm 이상의 철근겹침이음길이를 확보하면 연속된 철근을 사용한 경우와 거의 유사한 강도와 연성을 확보할 수 있는 것으로 나타났다.

Keywords

References

  1. Graybeal, B.A., "UHPC in the U.S. Highway Transportation System," 2nd International Symposium on Ultra High Performance Concrete, Kassel, Germany, 2008, pp. 11-17.
  2. Resplendino, J., "Ultra-High Performance Concretes - Recent Realizations and Research Programs on UHPFRC Bridges in France," 2nd International Symposium on Ultra High Performance Concrete, Kassel, Germany, 2008, pp. 31-43.
  3. Kim, B.S., Kim, S.W., Park, S.Y., and Koh, K.T., "R&D Activities and Application of High Performance Concrete to Cable Stayed Bridges," 3rd International Symposium on Ultra High Performance Concrete, Kassel, Germany, 2012, #1283.
  4. Perry, V., and Seibert, P., "Field Cast UHPC Connections for Precast Bridge Elements and Systems," 3rd International Symposium on Ultra High Performance Concrete, Kassel, Germany, 2012, #1225.
  5. Martin, S., and Werner, S., "Investigation on Bonding between Timber and Ultra High Performance Concrete," Construction and Building Materials, Vol. 25, Issue 7, 2011, pp. 3078-3088. https://doi.org/10.1016/j.conbuildmat.2010.12.060
  6. Raafat, E., and Donna, C., "Behaviour of Hybrid FRP-UHPC Beams subjected to Static Flexural Loading," Composites Part B: Engineering, Vol. 43, Issue 2, 2012, pp. 582-593. https://doi.org/10.1016/j.compositesb.2011.07.004
  7. Graybeal, B.A., and Swenty, M., "UHPFRC for Prefabricated Bridge Component Connections," 3rd International Symposium on Ultra High Performance Concrete, Kassel, Germany, 2012.
  8. Yoo, D.M., Hwang, H.H., Kim, S.T., and Park, S.Y., "An Experimental Study on the Shear Connection for UHPC Deck Bridge," Journal of the Korean Society for Composite Materials, Vol. 24, No. 1, 2011, pp. 29-33. https://doi.org/10.7234/kscm.2011.24.5.029
  9. Hwang, H.H., Yeo, I.S., Cho, K.H., and Park, S.Y., "Evaluations of Flexural Strength for UHPC Deck Joints with Lap-Spliced Reinforced Steel Bar," Journal of the Korean Institute for Structural Maintenance Inspection, Vol. 15, No. 6, 2011, pp. 92- 99.