Journal of the Korea Concrete Institute (콘크리트학회논문집)

Korea Concrete Institute (한국콘크리트학회)
권호 표지
DOI QR코드

DOI QR Code

A Study on Improvement of Seismic Performance of High Strength Reinforced Concrete Interior Beam-Column Joints Using High Ductile Fiber-Reinforced Mortar and Advanced Reinforcing Detailings

고인성섬유 복합 모르타르 및 고성능 배근상세를 활용한 고강도 철근콘크리트 내부 보-기둥 접합부의 내진성능 개선 연구

  • Received : 2012.11.26
  • Accepted : 2013.03.29
  • Published : 2013.04.30
Download PDF
⟨ Previous Next ⟩

Abstract

In this study, experimental research was carried out to evaluate and improve the seismic performance of high strength R/C interior beam-column joints regions using advanced reinforcing detailings and high ductile fiber-reinforced mortar. Five specimens of retrofitted the beam-column joint regions using advanced reinforcing detailings and high ductile fiber-reinforced mortar were constructed and tested for their retrofitring performances. Specimens designed by retrofitting the interior beam-column joint regions (IJIR series) of existing reinforced concrete building showed a stable mode of failure and an increase in load-carrying capacity. Specimens of IJIR series, designed by the retrofitting of advanced reinforcing detailings and high ductile fiber-reinforced mortar in reinforecd beam-column joint regions increased its maximum load carrying capacity by 114.2~123.5% and its energy dissipation capacity by 1.55~1.85 times in comparison with the standard specimen of SIJC with a displacement ductility of 5.

이 연구에서는 고강도 철근콘크리트 내부 보-기둥 접합부의 내진성능을 개선하기 위하여 보-기둥 접합부 영역을 고성능 배근상세 및 고인성섬유 복합 모르타르를 사용하여 보강하고 내진성능을 평가하였다. 총 5개의 실험체를 제작하고 실험을 수행하여 내진성능을 평가하였으며, 이 연구의 실험 결과를 근거로 다음과 같은 결론을 얻었다. 기존 고강도 철근콘크리트 내부 보-기둥 접합부의 위험단면 영역을 고성능 배근상세 및 고인성섬유 복합 모르타르로 보강한 결과 재하 전 과정을 통하여 안정적인 파괴형태 및 내력을 나타내었다. 고강도 철근콘크리트 내부 보-기둥 접합부의 내진성능을 개선하기 위하여 고성능 배근상세 및 고인성섬유 복합 모르타르를 사용하여 보강한 실험체(IJIR, IJIRS, IJIRP)는 재하 전 과정을 통하여 안정적인 이력거동을 나타내었고, 최대내력이 표준실험체의 114.2~123.5%, 에너지소산능력은 1.55~1.85배로 표준실험체에 비하여 매우 향상되었다.

Keywords

References

  1. Li, V. C., Wang, Y., and Backer, S., "A Micromechanical Model of Tension-Softening and Bridging Toughening of Short Random Fiber Reinforced Brittle Matrix Composites," Journal of the Mechanics and Physics of Solids, Vol. 39, Issue 5, 1991, pp. 607-625. (http://dx.doi.org/10.1016/0022- 5096(91)90043)
  2. Kanda, T. and Li, V. C., "A New Micromechanics Design Theory for Pseudo Strain Hardening Cementitious Composite," Journal of Engineering Mechanics, ASCE, Vol. 125, No. 4, 1999, pp. 373-381. https://doi.org/10.1061/(ASCE)0733-9399(1999)125:4(373)
  3. Li, V. C., Wu, C., Wang, S., Ogawa, A., and Saito, T., "Interface Tailoring for Strain Hardening PVA-ECC," ACI Materials Journal, Vol. 99, No. 5, 2002, pp. 463-472.
  4. Kim, Y. Y., Kim, J. S., Kim, H. S., Ha, K. J., and Kim, J. K., "Mechanical Properties of an ECC (Engineered Cementitious Composite) Designed Based on Micromechanical Principle," Journal of the Korea Concrete Institute, Vol. 17, No. 5, 2005, pp. 709-716. https://doi.org/10.4334/JKCI.2005.17.5.709
  5. Kim, Y. Y., Ha, G. J., and Shin, J. H., "Design of ECC (Engineered Cementitious Composite) Matrix Compositions Based on Micromechanics and Steady-State Cracking Theory," Journal of the Architectural Institute of Korea, Vol. 23, No. 5, 2007, pp. 11-19.
  6. Kim, J. S., Ha, G. J., Hong, K. H., and Shin, J. H., "Tensile and Fiber Dispersion Performance of ECC (Engineered Cementitious Composites) Designed with Ground Granulated Blast Furnace Slag," Journal of the Regional Association of Architectural Institute of Korea, Vol. 12, No. 2, 2010, pp. 209-216.
  7. Ha, G. J., Yi, D. R., and Hong, K. H., "Improvement and Evaluation of Repair-Retrofit Performance of Reinforced Concrete Beam using High Ductile Fiber-Reinforced Mortar with Ground Granulated Blast Furnace Slag," Journal of the Regional Association of Architectural Institute of Korea, Vol. 12, No. 4, 2010, pp. 261-270.
  8. Yang, I. S., Yun, H. D., Kim, S. W., Park, W. S., Han, B. C., and Moon, Y. J., "Hysteretic Characteristics of Seismic Devices Using High Performance Fiber Reinforced Cement Composites," Journal of the Architectural Institute of Korea, Vol. 21, No. 1, 2005, pp. 51-58.
  9. Kim, J. H., Yun, H. D., and Jeon, E., "Material Design, Characteristics and Application of Engineered Cementitious Composites," Magazine of the Korea Concrete Institute, Vol. 18, No. 1, 2006, pp. 28-35.
  10. Yoon, Y. S., "Concept and Background of Shear Design in Reinforced Concrete Beams," Magazine of the Korea Concrete Institute, Vol. 8, No. 5, 1996, pp. 61-69.