References
- G. Sauer, "Simple formulae for the approximate computation of axial stresses in pipes due to thermal stratification," Int. J. of Pre. Ves. & Piping, Vol. 69, pp. 213-223 (1996). https://doi.org/10.1016/0308-0161(95)00134-4
- J. C. Jo and D. G. Kang, "CFD analysis of thermally stratified flow and conjugate heat transfer in a PWR pressurizer surgeline," J. of Pre. Ves. Technol., Vol. 132, No. 2, pp. 021301.1-021301.10 (2010).
- Y. J. Yu, S. H. Park, G. H. Sohn and W. J. Bak, "Structural evaluation of thermal stratification of PWR surgeline," Nucl. Eng. & Design, Vol. 178, pp. 211-220 (1997). https://doi.org/10.1016/S0029-5493(97)00224-0
- S. Chattopadhyay, "Structural evaluation of a piping system subjected to thermal stratification," Nucl. Eng. & Design, Vol. 239, pp. 2236-2241 (2009). https://doi.org/10.1016/j.nucengdes.2009.07.017
- US NRC, "Thermal stresses in piping connected to reactor coolant systems," Bulletin 88-08 (1988).
- US NRC, "Pressurizer surge line thermal stratification," Bulletin 88-11 (1988).
- INES, "Leakage on a piping connected to the primary circuit, Dampierre NPP" (1997).
- EPRI, "Thermal stratification, cycling and striping (TASCS)," TR-103581 (1994).
- EPRI, "Material Reliability Program: Management of thermal fatigue in normally stagnant non-isolable reactor coolant system branch lines (MRP-146)," EPRI Report No.1011955 (2005).
- EPRI, "Material Reliability Program: Management of thermal fatigue in normally stagnant non-isolable reactor coolant system branch lines - supplemental guidance (MRP-146S)," EPRI Report No.1018330 (2009).
- S. B. Choi, S. H. Kim, Y. S. Chang, J. B. Choi, Y. G. Kim, J. H. Lee, J. S. Kim and H. D. Chung, "Evaluation of representative piping systems designed by implicit fatigue concept," Proc. ASME Pre. Ves. & Piping Conf., Illinois, USA, July 27-31 July, 2008.
- N. Simos, M. Reich and C. J. Costantino, "Assessment of thermal fatigue crack propagation in safety injection PWR lines," Proc. Pre. Ves. & Piping Conf., Tennessee, USA, June 17-21, 1990.
- M. J. Jung and Y. H. Choi, "Surge line stress due to thermal stratification," Nucl. Eng. & Technol., Vol. 40, No. 3, pp. 239-250 (2008). https://doi.org/10.5516/NET.2008.40.3.239
- M. Cross and A. Slone, "A review of commercial MPA capability in 2005," Proc. 10th Int. NAFEMS World Congress, Malta, USA, May 17-20, 2005.
- S. Chapuliot, C. Courdin, T. Payen, J. P. Magnaud and A. Monavon, "Hydro-thermal-mechanical analysis of thermal fatigue in a mixing tee," Nucl. Eng. & Design, Vol. 235, pp. 575-596 (2005). https://doi.org/10.1016/j.nucengdes.2004.09.011
- J. I. Lee, L. W. Hu, P. Saha and M. S. Kazimi, "Numerical analysis of thermal striping induced high cycle thermal fatigue in a mixing tee," Nucl. Eng. & Design, Vol. 239, pp. 833-839 (2009). https://doi.org/10.1016/j.nucengdes.2008.06.014
- ANSYS Inc., "ANSYS CFX - solver theory guide release 12.0" (2009).
- ANSYS Inc., "ANSYS manual release 12.0" (2009).
- F. Menter, "Two-equation eddy-viscosity turbulence models for engineering applications," AIAA Journal, Vol. 32, No. 8, pp. 1598-1605 (1994). https://doi.org/10.2514/3.12149
- T. H. Frank, C. Lifante, H. M. Prasser and F. Menter, "Simulation of turbulent and thermal mixing in T-junctions using URANS and scale-resolving turbulence models in ANSYS CFX," Nucl. Eng. & Design, Vol. 240, pp. 2313- 2328 (2010). https://doi.org/10.1016/j.nucengdes.2009.11.008
- J. I. Park, "A numerical analysis on thermal stratification phenomenon by in-leakage in a branch piping," J. of Mech. Sci. & Technol., Vol. 19, No. 12, pp. 2245-2252 (2005). https://doi.org/10.1007/BF02916464
- ASME, "ASME Boiler and Pressure Vessel Code, Sec. II - Materials" (1998).