DOI QR코드

DOI QR Code

폴리에틸렌 보트의 구조강도 평가에 관한 연구

A Study on Structural Strength Assessment of Polyethylene Boat

  • 조석수 (강원대학교 자동차공학과) ;
  • 곽원민 (강원대학교 대학원 자동차공학과) ;
  • 함범식 ((주) 누리텍 해양레저산업기술연구소) ;
  • 조영철 ((주) 누리텍 해양레저산업기술연구소)
  • Cho, Seok-Swoo (Deprtment of Vehicle Engineering, Kangwon National University) ;
  • Kwak, Won-Min (Deprtment of Vehicle Engineering, Graduate School, Kangwon National University) ;
  • Ham, Bum-Sik (Ocean Leisure Industry Laboratory, Nuritec Co., Ltd.) ;
  • Jo, Young-Chul (Ocean Leisure Industry Laboratory, Nuritec Co., Ltd.)
  • 투고 : 2012.07.09
  • 심사 : 2013.03.07
  • 발행 : 2013.03.31

초록

플레저 보트나 요트는 FRP나 알루미늄으로 제작되고 있으나 FRP는 해양환경오염으로, 알루미늄은 낮은 가격 경쟁력으로 인하여 해당 제품의 시장 지배력이 약화되고 있다. 따라서 본 연구에서는 선체를 폴리에틸렌으로 제작하여 일본소형선박검사사무규정세칙에서 제안하고 있는 소형선체에 대한 구조 안전성 평가 방법을 통하여 폴리에틸렌 선체의 구조 안전성을 확인한 결과, 폴리에틸렌 보트가 FRP 보트보다 매우 높은 구조 안전성을 보였다.

Boat or yacht hull has been built mainly by FRP composite materials. FRP boat hull manufacturing begins to be restricted after the year 2000 under international regulation on ocean environment safety. The alternative of FRP has been proposed by many boat builders and high strength aluminium is considered as its standard material. But high strength aluminium is very expensive as boat hull material. In this study, boat hull is considered to be built by high density polyethylene and its structural strength is estimated by longitudinal strength test method on small craft. Tensile strength of polyethylene boat hull material is higher than that of FRP boat hull material. But safety factor of polyethylene boat hull is more than that of FRP boat hull. These study results indicate structural integrity and quality control of polyethylene boat is better than those of FRP boat.

키워드

참고문헌

  1. H.B.Moraes, J.M.Vasconcellos and P.M.Almeida, "Multiple Criteria Optimization applied to High Speed Catamaran Preliminary Design", Ocean Engineering, Vol.34, pp.133-147, 2007. DOI: http://dx.doi.org/10.1016/j.oceaneng.2005.12.009
  2. N. Z. Chena and C. Guedes Soares, "Longitudinal Strength Analysis of Ship Hulls of Composite Materials under Sagging Moments", Composite Structures, Vol.77, pp. 36-44, 2007. DOI: http://dx.doi.org/10.1016/j.compstruct.2005.06.002
  3. B.K.Hong, "A Study on the Standard of Ship Hull Construction for Aluminium Alloys Fishing Boats", The Korean Society for Fisheries and Marine Sciences Education, Vol.12, No.1, pp.22-88, 2000.
  4. N. Z. Chena and C. Guedes Soares, "Reliability Assessment for Ultimate Longitudinal Strength of Ship Hulls in Composite Materials", Probabilistic Engineering Mechanics, Vol.22, Issue 4, pp. 330-342, 2007. DOI: http://dx.doi.org/10.1016/j.probengmech.2007.05.001
  5. B.Y.Kang, "Build Wooden Canoe Myself", Mannam Press, pp.103-108, Seoul, Korea, 2007.
  6. C.K.Park, M.G.Kim and S.S.Cho, "Study on Structural Analysis and Manufacturing of Polyethylene Canoes", Trans. of the KSME(A), Vol.35, No.3, pp.309-316 2011. https://doi.org/10.3795/KSME-A.2011.35.3.309
  7. JCI, "Rules and Regulations for Inspection of Japan Small Craft", JCI, Tokyo Japan, 2007.
  8. Minister of land, transport and maritime affairs, "Structural Design Guide for FRP Ship", MLTMA, Seoul Korea, 2007.
  9. KS M 3022, "Testing Method for Tensile Creep of Plastics", KS, Seoul Korea, 2008.
  10. ISO 12215-5, "Small Craft-Hull Construction and Scantlings - Part 5: Design Pressures for Monohulls, Design Stresses, Scantlings Determination", ISO, Geneva Switzerland, 2008.
  11. H.K.Choi and S.Y.Kwon, "A Study on Structural Strength Assessment in FRP Ship", JKSTA, pp.46-63, 2010.
  12. W.B.Kim, Corrosion, "Fatigue Crack Propagation Behaviour of TMCP Steel Plate at Ballast Tank of Ship Structure under the Condition of Cathodic Overprotection", JKAICS, Vol.13, No.6, pp.2465-2471, 2012.
  13. J.S.Lee, "Structural Analysis of Hydraulic Valve Meter", JKAICS, Vol.13, No.4, pp.1447-1452, 2012. DOI: http://dx.doi.org/10.5762/KAIS.2012.13.4.1447

피인용 문헌

  1. Structural Design of Polyethylene Boat Hull by using Longitudinal Bending Strength Test Method vol.16, pp.12, 2015, https://doi.org/10.5762/KAIS.2015.16.12.8447