참고문헌
- E. A. Loria, "How Machinable are the Cast Irons?", Iron Age 172 (1953) 158-161
- J. F. Janowak and R. B. Gundlach, "Improved Machinability of High Strength Gray Iron", AFS Trans. 93 (1985) 961-968
- P. Millet, R. Schaller and W. Benoit, "High Damping in Grey Cast Iron", J. Phys. Colloques 46 (1985) 405-408
- C. F. Bates, "Study Examines Influences on Machinability of Iron Castings", Modern Casting 86 (1996) 36-39
- C. M. Burke, D. J. Moore, J. R. Parolini, K. B. Rundman and D. Waarala, "Machinalbility of Gray Cast Iron: A Drilling Study", AFS Trans. 107 (1999) 567-575
- R. O'Rourke and M. Grander, "Cast Iron: A Solid Choice for Reducing Gear Noise", Gear Tech. 16 (1999) 46-49
- T. Murakami, T. Inoue, H. Shimura, M. Nakano and S. Sasaki, "Damping and Tribological Properties of Fe-Si-C Cast Iron Prepared Using Various Heat Treatments", Mater. Sci. Eng. A 432 (2006) 113-119 https://doi.org/10.1016/j.msea.2006.06.090
- L. Collini, G. Nicoletto and R. Konecna, "Microstructure and Mechanical Properties of Pearlitic Gray Cast Iron", Mater. Sci. Eng. A 488 (2008) 529-539 https://doi.org/10.1016/j.msea.2007.11.070
- H. Nakae and K. Fujimoto, "Influence of Ti on Graphite Morphological Transition in Flake Graphite Cast Iron", Key Eng. Mater. 457 (2011) 25-30
- K. Tanaka, T. Okamura and T. Satou, "Thin Wall and Lightweight Cylinder Block Production Technology", J. Jpn. Foundry Eng. Soc. 73 (2001) 527-533
-
E. Fritsche, "Energy Efficiency and
$CO_2$ Emissions - Manufacture of Crankcases Made of Cast Iron versus Aluminium Alloy", Giesserei-Rundschau 56 (2009) 160-164 - M. Swenson, M. Languell and J. Golden, "Modeling & Simulation: The Return on Investment in Material Science", IDC White Paper (2004)
- D. R. Gaskell, "Introduction to the Thermodynamics of Materials", Taylor & Francis, New York (1981)
- B. Sundman, B. Jansson and J. O. Andersson, "The Thermo- Calc Databank System", Calphad 9 (1985) 153-190 https://doi.org/10.1016/0364-5916(85)90021-5
- J. O. Andersson, T. Helander, L. Höglund, P. Shi and B. Sundman, "Thermo-Calc and DICTRA, Computations Tools for Materials Science", Calphad 26 (2002) 273-312 https://doi.org/10.1016/S0364-5916(02)00037-8
- I. Barin and O. Knacke, "Thermochemical Properties of Inorganic Substances", Springer-Verlag, Berlin (1973)
- J. A. Dean, "Lange's Handbook of Chemistry", McGraw-Hill, New York (1979)
- D. R. Askeland, P. K. Trojan and R. A. Flinn, "Investigation of Mechanism of Dross Formation in Ductile Iron", AFS Trans. 78 (1970) 125-132
- D. R. Askeland, P. K. Trojan and R. A. Flinn, "Dross Forming Reactions in the System Mg-Si-O in Ductile Iron", AFS Trans. 80 (1972) 349-358
- R. L. Nara and J. F. Wallace, "Minor Elements in Grey Iron", AFS Trans. 78 (1970) 223-226
- Y. Ueda, M. Takita, K. Ishikawa and T. Yamamoto, "A Study on the Nucleation of Graphite in Cast Iron", Imono 52 (1980) 553-557
- J. Tartera, "Cast Iron Inoculation Mechanisms", J. AFS-ICM 12 (1982) 46-49
- K. C. Su, T. Ohide and G. Ohira, "The Fluidity of Thin Iron Castings", J. Jpn. Foundry Eng. Soc. 50 (1978) 739-745
- A. H. Zadeh and J. Campbell, Fluidity of Eutectic Grey Iron in Thin Sections, Inter. J. Cast Met. Res. 17 (2004) 201-205 https://doi.org/10.1179/136404604225020614
- T. Kanno, H. Kimura and H. Nakae, "The Relationship between the Variation of Eutectic Temperature and Melt Quality in Cast Iron", 64th World Foundry Congress (2002)
- T. Kanno, M. Morinaka and H. Nakae, "Relationship between Variation of Eutectic Temperature and Melt Quality in Cast Iron", J. Jpn. Foundry Eng. Soc. 74 (2002) 305-311
- H. Takeda, H. Yoneda and K. Asano, "Effect of Silicon and Bismuth on Solidification Structure of Thin Wall Spheroidal Graphite Cast Iron", Mater. Trans. 51 (2010) 176-185 https://doi.org/10.2320/matertrans.M2009255
- N. Ridley, "A Review of the Data on the Interlamellar Spacing of Pearlite", Metall. Trans. A 15 (1984) 1019-1036 https://doi.org/10.1007/BF02644694
- A. M. Elwazri, P. Wanjara, S. Yue, "The Effect of Microstructural Characteristics of Pearlite on the Mechanical Properties of Hypereutectoid Steel", Mater. Sci. Eng. A 404 (2005) 91-98 https://doi.org/10.1016/j.msea.2005.05.051