한국주조공학회지 (Journal of Korea Foundry Society)

  • 제33권1호
  • /
  • Pages.32-40
  • /
  • 2013
  • /
  • 1598-706X(pISSN)
  • /
  • 2288-8381(eISSN)
한국주조공학회 (Korea Foundry Society)
권호 표지

고특성 편상흑연주철 개발을 위한 열역학 분석법 활용

Application of Thermodynamic Analysis Method for the Development of Flake Graphite Cast Irons with Superior Properties

  • 이상환 (한국생산기술연구원 주조공정연구그룹) ;
  • 이상목 (한국생산기술연구원 주조공정연구그룹)
  • Lee, Sang-Hwan (Liquid Processing & Casting Technology R&D Group, Korea Institute of Industrial Technology) ;
  • Lee, Sang-Mok (Liquid Processing & Casting Technology R&D Group, Korea Institute of Industrial Technology)
  • 발행 : 2013.02.28
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

키워드

참고문헌

  1. E. A. Loria, "How Machinable are the Cast Irons?", Iron Age 172 (1953) 158-161
  2. J. F. Janowak and R. B. Gundlach, "Improved Machinability of High Strength Gray Iron", AFS Trans. 93 (1985) 961-968
  3. P. Millet, R. Schaller and W. Benoit, "High Damping in Grey Cast Iron", J. Phys. Colloques 46 (1985) 405-408
  4. C. F. Bates, "Study Examines Influences on Machinability of Iron Castings", Modern Casting 86 (1996) 36-39
  5. C. M. Burke, D. J. Moore, J. R. Parolini, K. B. Rundman and D. Waarala, "Machinalbility of Gray Cast Iron: A Drilling Study", AFS Trans. 107 (1999) 567-575
  6. R. O'Rourke and M. Grander, "Cast Iron: A Solid Choice for Reducing Gear Noise", Gear Tech. 16 (1999) 46-49
  7. T. Murakami, T. Inoue, H. Shimura, M. Nakano and S. Sasaki, "Damping and Tribological Properties of Fe-Si-C Cast Iron Prepared Using Various Heat Treatments", Mater. Sci. Eng. A 432 (2006) 113-119 https://doi.org/10.1016/j.msea.2006.06.090
  8. L. Collini, G. Nicoletto and R. Konecna, "Microstructure and Mechanical Properties of Pearlitic Gray Cast Iron", Mater. Sci. Eng. A 488 (2008) 529-539 https://doi.org/10.1016/j.msea.2007.11.070
  9. H. Nakae and K. Fujimoto, "Influence of Ti on Graphite Morphological Transition in Flake Graphite Cast Iron", Key Eng. Mater. 457 (2011) 25-30
  10. K. Tanaka, T. Okamura and T. Satou, "Thin Wall and Lightweight Cylinder Block Production Technology", J. Jpn. Foundry Eng. Soc. 73 (2001) 527-533
  11. E. Fritsche, "Energy Efficiency and $CO_2$ Emissions - Manufacture of Crankcases Made of Cast Iron versus Aluminium Alloy", Giesserei-Rundschau 56 (2009) 160-164
  12. M. Swenson, M. Languell and J. Golden, "Modeling & Simulation: The Return on Investment in Material Science", IDC White Paper (2004)
  13. D. R. Gaskell, "Introduction to the Thermodynamics of Materials", Taylor & Francis, New York (1981)
  14. B. Sundman, B. Jansson and J. O. Andersson, "The Thermo- Calc Databank System", Calphad 9 (1985) 153-190 https://doi.org/10.1016/0364-5916(85)90021-5
  15. J. O. Andersson, T. Helander, L. Höglund, P. Shi and B. Sundman, "Thermo-Calc and DICTRA, Computations Tools for Materials Science", Calphad 26 (2002) 273-312 https://doi.org/10.1016/S0364-5916(02)00037-8
  16. I. Barin and O. Knacke, "Thermochemical Properties of Inorganic Substances", Springer-Verlag, Berlin (1973)
  17. J. A. Dean, "Lange's Handbook of Chemistry", McGraw-Hill, New York (1979)
  18. D. R. Askeland, P. K. Trojan and R. A. Flinn, "Investigation of Mechanism of Dross Formation in Ductile Iron", AFS Trans. 78 (1970) 125-132
  19. D. R. Askeland, P. K. Trojan and R. A. Flinn, "Dross Forming Reactions in the System Mg-Si-O in Ductile Iron", AFS Trans. 80 (1972) 349-358
  20. R. L. Nara and J. F. Wallace, "Minor Elements in Grey Iron", AFS Trans. 78 (1970) 223-226
  21. Y. Ueda, M. Takita, K. Ishikawa and T. Yamamoto, "A Study on the Nucleation of Graphite in Cast Iron", Imono 52 (1980) 553-557
  22. J. Tartera, "Cast Iron Inoculation Mechanisms", J. AFS-ICM 12 (1982) 46-49
  23. K. C. Su, T. Ohide and G. Ohira, "The Fluidity of Thin Iron Castings", J. Jpn. Foundry Eng. Soc. 50 (1978) 739-745
  24. A. H. Zadeh and J. Campbell, Fluidity of Eutectic Grey Iron in Thin Sections, Inter. J. Cast Met. Res. 17 (2004) 201-205 https://doi.org/10.1179/136404604225020614
  25. T. Kanno, H. Kimura and H. Nakae, "The Relationship between the Variation of Eutectic Temperature and Melt Quality in Cast Iron", 64th World Foundry Congress (2002)
  26. T. Kanno, M. Morinaka and H. Nakae, "Relationship between Variation of Eutectic Temperature and Melt Quality in Cast Iron", J. Jpn. Foundry Eng. Soc. 74 (2002) 305-311
  27. H. Takeda, H. Yoneda and K. Asano, "Effect of Silicon and Bismuth on Solidification Structure of Thin Wall Spheroidal Graphite Cast Iron", Mater. Trans. 51 (2010) 176-185 https://doi.org/10.2320/matertrans.M2009255
  28. N. Ridley, "A Review of the Data on the Interlamellar Spacing of Pearlite", Metall. Trans. A 15 (1984) 1019-1036 https://doi.org/10.1007/BF02644694
  29. A. M. Elwazri, P. Wanjara, S. Yue, "The Effect of Microstructural Characteristics of Pearlite on the Mechanical Properties of Hypereutectoid Steel", Mater. Sci. Eng. A 404 (2005) 91-98 https://doi.org/10.1016/j.msea.2005.05.051