Journal of computational fluids engineering (한국전산유체공학회지)

Korean Society of Computational Fluids Engineering (한국전산유체공학회)
권호 표지
DOI QR코드

DOI QR Code

NUMERICAL ANALYSIS OF CONJUGATE HEAT TRANSFER INSIDE A THERMAL BOUNDARY LAYER CONSIDERING THE EFFECTS OF A FREE STREAM VELOCITY AND A THERMOCOUPLE POSITION

유속 및 열전대 위치의 영향을 고려한 열경계층 내부의 복합열전달 해석

  • Jeon, B.J. (Dept. of Energy System, Graduate School of Energy and Environment, Seoul Nat'l Univ. of Science and Technology) ;
  • Lee, J.A. (Dept. of Mechanical/Automotive Engineering, Seoul Nat'l Univ. of Science and Technology) ;
  • Choi, H.G. (Dept. of Mechanical/Automotive Engineering, Seoul Nat'l Univ. of Science and Technology)
  • 전병진 (서울과학기술대학교 에너지환경대학원 에너지시스템공학과) ;
  • 이주안 (서울과학기술대학교 기계자동차공학과) ;
  • 최형권 (서울과학기술대학교 기계자동차공학과)
  • Received : 2012.12.06
  • Accepted : 2013.01.30
  • Published : 2013.03.31
Download PDF
⟨ Previous Next ⟩

Abstract

The error in measuring temperature profiles by thermocouple inside boundary layer mostly comes from the conduction heat transfer of the thermocouple. The error is not negligible when the conductivity of the thermocouple is very high. In this study, the effect of conduction heat transfer of the thermocouple on the temperature profile inside boundary layer was examined by considering both free-stream velocity and a thermocouple position. The conduction error of an E-type thermocouple was investigated by numerical analysis of three-dimensional conjugate heat transfer for various velocity profiles of boundary layer and thermocouple positions.

Keywords

References

  1. Omega, The thermocouple, Omega.
  2. 1992, Sundqvist, B., "Thermal Diffusivity and Thermal Conductivity of Chromel, Alumel, and Constantan in the Range 100-450K," Trans. of the J. Appl. Phys., Vol.72, No.2, pp.539-545. https://doi.org/10.1063/1.351885
  3. 1975, Blackwell, B.F. and Moffat, R.J., "Design and Construction of Low Velocity Boundary-layer Temperature Probe," Trans. of the J. Heat Trasf., Vol.97, No.2, pp.1-14. https://doi.org/10.1115/1.3450281
  4. 2002, Shi, J.-M., Breuer, M. and Durst, F., "Wall Effect on Heat Transfer form a Micro-cylinder in Near-wall Shear Flow," Trans. of the Int. J. Heat Mass Trasf., Vol.45, pp.1309-1320. https://doi.org/10.1016/S0017-9310(01)00225-3
  5. 1999, Lange, C.F., Durst, F. and Breuer, M., "Wall Effect on Heat Losses form Hot-wires," Trans. of the Heat and Fluid Flow, Vol.20, pp.34-47. https://doi.org/10.1016/S0142-727X(98)10038-3
  6. 1982, Bhatia, J.C., Durst, F. and Jovanovic, J., "Corrections of Hot-wire Anemometer Measurements Near Walls," Trans. of the J. Fluid Mech., Vol.122, pp.411-431. https://doi.org/10.1017/S0022112082002286
  7. 2002, Durst, F., Shi, J.-M. and Breuer, M., "Numerical Prediction of Hot-wire Corrections Near Walls," Trans. of the ASME., Vol.124, pp.241-255.
  8. 2001, Durst, F., Zanoun, E.-S. and Pashtrapanska, M., "In Situ Calibration of Hot Wires Close to Highly Heatconducting Walls," Trans. of the Experiments in Fluids, Vol.31, pp.103-110. https://doi.org/10.1007/s003480000264
  9. 1998, Chew, Y.T., Khoo, B.C. and Li, G.L., "An Investigateion of Wall Effects on Hot-wire Measurements Using a Bent Sublayer Probe," Trans. of the Meas. Sci Technol., Vol.9, pp.67-85. https://doi.org/10.1088/0957-0233/9/1/010
  10. 2011, Kulkani, K.S., Han, S. and Goldstein, R.J., "Numerical Simulation of Thermal Boundary Layer Profile Measurement," Trans. of the Heat and Mass Trasf., Vol.47, No.8, pp.869-877. https://doi.org/10.1007/s00231-011-0833-5
  11. 1999, Mosasd, M., "Laminar Forced Convection Conjugate Heat Transfer Over a Flat Plate," Trans. of the Heat and Mass Trasf., Vol.35, pp.371-375. https://doi.org/10.1007/s002310050338
  12. 2007, Han, S. and Goldstein, R.J., "Heat Transfer Study in a Linear Turbine Cascade Using a Thermal Boundary Layer Measurement Technique," Trans. of the ASME, Vol.129, pp.1384-1394. https://doi.org/10.1115/1.2754972
  13. 1986, Holman, J.P., Heat Transfer, McGraw-Hill.