DOI QR코드

DOI QR Code

NUMERICAL STUDY OF NON-UNIFORM TIP CLEARANCE EFFECTS ON THE PERFORMANCE AND FLOW FIELD IN A CENTRIFUGAL COMPRESSOR

비균일 익단간극이 원심압축기의 성능과 유동에 미치는 영향에 대한 수치해석적 연구

  • Jung, Y.H. (Dept. of Mechanical Engineering, POSTECH) ;
  • Park, J.Y. (Korea Institute of Machinery and Materials) ;
  • Choi, M. (Dept. of Mechanical Engineering, Myongji Univ.) ;
  • Baek, J.H. (Dept. of Mechanical Engineering, POSTECH)
  • Received : 2012.07.04
  • Accepted : 2013.03.13
  • Published : 2013.03.31

Abstract

This paper presents a numerical investigation of the influences of various non-uniform tip clearances on the performance and flow field in a centrifugal compressor. Numerical simulations were conducted for three centrifugal compressor impellers in which the tip clearance height varied linearly from the leading edge to the trailing edge. The numerical result was compared with the experimental data for validation. Although the performance improved for low tip clearances, a smaller tip clearance at the trailing edge reduced the overall tip leakage flow more effectively than a smaller tip clearance at the leading edge. Therefore, a smaller tip clearance at the trailing edge lowered the mixing loss caused by interactions between the tip leakage flow and the main passage flow.

Keywords

References

  1. 1973, Pampreen, R.C., "Small turbomachinery compressor and fan aerodynamics," ASME J. Eng. Power, Vol.95, pp.251-256. https://doi.org/10.1115/1.3445730
  2. 1986, Senoo, Y. and Ishida, M., "Pressure loss due to the tip clearance of impeller blades in centrifugal and axial blowers," ASME J. Eng. Gas Turbines Power, Vol.108, pp.32-37. https://doi.org/10.1115/1.3239882
  3. 1987, Senoo, Y. and Ishida, M., "Deterioration of compressor performance due to tip clearance of centrifugal impellers," ASME J. Turbomach, Vol.109, pp.55-61. https://doi.org/10.1115/1.3262070
  4. 1990, Ishida, M., Senoo, Y. and Ueki, H., "Secondary flow due to the tip clearance at the exit of centrifugal impellers," ASME J. Turbomach, Vol.112, pp.19-24. https://doi.org/10.1115/1.2927414
  5. 1992, Goto, A., "The effect of tip leakage flow on part-load performance of a mixed-flow pump impeller," ASME J. Turbomach, Vol.114, pp.383-391. https://doi.org/10.1115/1.2929155
  6. 2003, Hong, S.S., Schleer, M. and Abhari, R.S., "Effect of tip clearance on the flow and performance of a centrifugal compressor," ASME paper FEDSM 2003-45094.
  7. 2003, Eum, H.J. and Kang, S.H., "Numerical study on tip clearance effects on performance of a centrifugal compressor," Transactions of the KSME B, Vol.27, pp.389-397.
  8. 2008, Kang, Y.S., Park, T.C. and Kang, S.H., "Prediction of flow field in an axial compressor with a non-uniform tip clearance at the design and off-design conditions," Journal of Fluid Machinery, Vol.11, pp.46-53.
  9. 2003, Weiss, C., Grates, D.R., Thermann, H. and Niehuis, R., "Numerical investigation of the influence of the tip clearance on wake formation inside a radial impeller," ASME paper GT 2003-38279.
  10. 2005, Kang, J.S., Lim, B.J., Cha, B.J. and Yang, S.S., "Performance test of centrifugal compressor for microturbine with running tip clearance," Journal of Fluid Machinery, Vol.8, pp.7-15.
  11. 1997, Bardina, J.E., Huang, P.G. and Coakley, T., "Turbulence modeling validation," 28th AIAA Fluid Dynamics Conference, AIAA-1997-2121.
  12. 1996, Japikse, D., Centrifugal compressor design and performance, Concepts ETI, Inc, Wilder.

Cited by

  1. Optimal Design for a Conic Winglet of a Dual Type Combined Fan vol.44, pp.6, 2016, https://doi.org/10.5139/JKSAS.2016.44.6.468