전기학회논문지 (The Transactions of The Korean Institute of Electrical Engineers)

  • 제62권3호
  • /
  • Pages.365-370
  • /
  • 2013
  • /
  • 1975-8359(pISSN)
  • /
  • 2287-4364(eISSN)
대한전기학회 (The Korean Institute of Electrical Engineers)
권호 표지
DOI QR코드

DOI QR Code

온도에 따른 PV모듈의 출력에 영향을 미치는 요소 분석

Analysis of Factor on the Temperature Effect on the Output of PV Module

  • 임종록 (건국대학교 전기공학과) ;
  • 우성철 (LG CNS, 태양광 사업팀 Solar 에너지비즈니스) ;
  • 정태희 (한국에너지기술연구원, 태양에너지 연구단) ;
  • 민용기 (건국대학교 전기공학과) ;
  • 원창섭 (LS산전, 스마트그리드연구단 전력변환연구팀) ;
  • 안형근 (건국대학교 전기공학과)
  • 투고 : 2012.10.31
  • 심사 : 2013.02.26
  • 발행 : 2013.03.01
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

Generally, photovoltaic modules consist of glass, EVA, Solar Cell, back sheet and ribbon. But EVA, solar cell, ribbon affect electric output with temperature. EVA is a change in the transmittance of light from the sun. In addition, the solar cell output is decreased with temperature and the ribbon increases resistance. Transmittance and reflectance of glass and EVA were measured. In this paper, the characteristics of the components of PV module as EVA and Glass, ribbon were studied by variable temperature. effects on material properties investigated. As a result, glass is independent in temperature variation. EVA was the reduction 1~4% in transmittance. Solar cell decrease 0.469[%/$^{\circ}C$] in electric output by temperature variation. Other factors was controlled in solar cell..

키워드

참고문헌

  1. J. Park, "Temperature Study of the Efficiency in single-crystalline Photovoltaic Module" Kieeme. Vol.6 pp.111-112, 2005 July 07
  2. B. Marion "A Method for Modeling the Current-Voltage Curve of a PV Module for Outdoor Conditions." Wiley Volume 10, page 205-214 May 2002 https://doi.org/10.1002/pip.403
  3. J. Kim "Effects of Ambient Temperature on the Thermal Characteristics of Photovoltaic Modules." Proceedings of the KSES autumn annual conference pp. 48-52, 2008 Nov 14
  4. B. J. HUANG, T. H. LIN, W. C. HUNG and F. S. SUN "PERFORMANCE EVALUATION OF SOLAR PHOTOVOLTAIC/THERMAL SY STEMS" Solar Energy No. 5, pp. 443-448. 2001
  5. H. Shin, "The efficiency of solarcell related to temperature" Proceedings of the Kiiee autumn annual conference, pp. 356-359 2009 May 07
  6. A. D. JONES and C. P. UNDERWOOD "A THERMAL MODUEL FOR PHOTOVOLTAIC SYSTEMS", Solar Energy Vol. 70, No. 4, pp. 349-359, 2001 https://doi.org/10.1016/S0038-092X(00)00149-3
  7. M. Mattei, G. Notton, C. Cristofari, M. Muselli, P. Poggi "Calculation of Polycrystalline PV module temperature using a simple method of energy balance", Renewable Energy 31 (2006) 553-567 https://doi.org/10.1016/j.renene.2005.03.010
  8. K. Nishioka, T. hatayama, Y. Uraoka, T. Fuyuki, R. Hagihara, M. Watanabe "Field-test analysis of PV system output characteristics focusing on module temperature" Solar Energy Materials & Solar Cells 75 (2003) 665-671 https://doi.org/10.1016/S0927-0248(02)00148-4
  9. Y.-J. Wang P.-C. Hsu "Analytical modelling of partial shading and different orientation of photovoltaic modules" Renewable power Generation Vol 4, pp. 272-282. 2010 https://doi.org/10.1049/iet-rpg.2009.0157
  10. J. Lee, "Solar Cell Engineering", Green, pp. 38-38. 2007
  11. S. Woo, "A Study on The Electrical Characteristics in Ribbon by Temperature Changes", Kieeme, 2010 Proceedings of the Kiiee summer annual conference Vol.11 pp.67-67 2010 June 16

피인용 문헌

  1. Effect of high irradiation and cooling on power, energy and performance of a PVT system vol.116, 2018, https://doi.org/10.1016/j.renene.2017.10.004
  2. Effect of high irradiation on photovoltaic power and energy 2017, https://doi.org/10.1002/er.3907
  3. Water/MWCNT nanofluid based cooling system of PVT: Experimental and numerical research 2018, https://doi.org/10.1016/j.renene.2018.01.014