Transactions of the Korean hydrogen and new energy society (한국수소및신에너지학회논문집)

The Korean Hydrogen and New Energy Society (한국수소및신에너지학회)
권호 표지
DOI QR코드

DOI QR Code

Study on Optimization of Operating Conditions for High Temperature PEM Fuel Cells Using Design of Experiments

실험계획법을 이용한 고온 고분자 전해질 막 연료전지의 운전조건 최적화 연구

  • Kim, Jintae (Hydrogen and Fuel Cell Research Center, Korea Institute of Energy Research) ;
  • Kim, Minjin (Hydrogen and Fuel Cell Research Center, Korea Institute of Energy Research) ;
  • Sohn, Youngjun (Hydrogen and Fuel Cell Research Center, Korea Institute of Energy Research)
  • 김진태 (한국에너지기술연구원 수소연료전지연구단) ;
  • 김민진 (한국에너지기술연구원 수소연료전지연구단) ;
  • 손영준 (한국에너지기술연구원 수소연료전지연구단)
  • Received : 2012.12.28
  • Accepted : 2013.02.28
  • Published : 2013.02.28
Download PDF
⟨ Previous Next ⟩

Abstract

High temperature proton exchange membrane fuel cells (PEMFCs) using phosphoric acid (PA) doped polybenzimidazole (PBI) membranes have been concentrated as one of solutions to the limits with traditional low temperature PEMFCs. However, the amount of reported experimental data is not enough to catch the operational characteristics correlated with cell performance and durability. In this study, design of experiments (DOE) based operational optimization method for high temperature PEMFCs has been proposed. Response surface method (RSM) is very useful to effectively analyze target system's characteristics and to optimize operating conditions for a short time. Thus RSM using central composite design (CCD) as one of methodologies for design of experiments (DOE) was adopted. For this work, the statistic models which predict the performance and degradation rate with respect to the operating conditions have been developed. The developed performance and degradation models exhibit a good agreement with experimental data. Compared to the existing arbitrary operation, the expected cell lifetime and average cell performance during whole operation could be improved by optimizing operating conditions. Furthermore, the proposed optimization method could find different new optimal solutions for operating conditions if the target lifetime of the fuel cell system is changed. It is expected that the proposed method is very useful to find optimal operating conditions and enhance performance and durability for many other types of fuel cell systems.

Keywords

References

  1. J. Larminie, A. Dicks : "Fuel cell systems explained", Revision 2, John Willey & Sons Inc., England, 2003, pp. 1-24.
  2. R. O'Hayre, S. W. Cha, W. Colella, F. B. Prinz : "Fuel Cell Fundamentals", Revision 2, John Wiley & Sons, INC., New York, 2009.
  3. J. J. Baschuk, X. Li, International Journal of Energy Research : "Carbon monoxide poisoning of proton exchange membrane fuel cells", Vol. 25, 2001, pp. 695-713. https://doi.org/10.1002/er.713
  4. H. P. Dhar, L. G. Christner, A. K. Kush, H. C. Maru : "Performance Study of a Fuel Cell Pt‐on‐C Anode in Presence of CO and $CO_2$, and Calculation of Adsorption Parameters for CO Poisoning", Journal of the Electrochemical Society, Vol. 133, No. 8, 1986, pp. 1574-1582. https://doi.org/10.1149/1.2108971
  5. A. R. Korsgaard, R. Refshauge, M. P. Nielsen, M. Bang, S. K. Kaer : "Experimental characterization and modeling of commercial polybenzimidazole-based MEA performance", Journal of Power Sources, Vol. 162, 2006, pp. 239-245. https://doi.org/10.1016/j.jpowsour.2006.06.099
  6. Z. Qi, S. Buelte : "Effect of open circuit voltage on performance and degradatoiin of high temperature $PBI-H_3PO_4$ fuel cells", Journal of Power Sources, Vol. 161, 2006, pp. 1126-1132. https://doi.org/10.1016/j.jpowsour.2006.06.020
  7. P. Mocoteguy, B. Ludwig, J. Scholta, Y. Nedellec, D. J. Jones, J. Roziere : "Long-Term Testing in Dynamic Mode of HT-PEMFC $H_3PO_4/PBI$ Celtec-P Based Membrane Electrode Assemblies for Micro-CHP Applications", Fuel Cells, Vol. 10, No. 2, 2010, pp. 299-311. https://doi.org/10.1002/fuce.200900153
  8. T. J. Schmidt, J. Baurmeister : "Properties of high-temperature PEFC Celtec-P 1000 MEAs in start/stop operation mode", Journal of Power Sources, Vol. 176, 2008, pp. 428-434. https://doi.org/10.1016/j.jpowsour.2007.08.055
  9. A. D. Modestov, M. R. Tarasevich, V. Y. Filimonov, N. M. Zagudaeva : "Degradation of high temperature MEA with $PBI-H_3PO_4$ membrane in a life test", Electrochemica Acta, Vol. 54, 2009, pp. 7121-7127. https://doi.org/10.1016/j.electacta.2009.07.031
  10. G. Liu, H. Zhang, J. Hu, Y. Zhai, D. Xu, Z. G. Shao : "Studies of performance degradation of a high temperature PEMFC based on $H_3PO_4-doped$ PBI", Journal of Power Sources, Vol. 162, 2006, pp. 547-552. https://doi.org/10.1016/j.jpowsour.2006.07.008
  11. S. J. Andreasen, J. R. Vang, S. K. Kær : "High temperature PEM fuel cell performance characterisation with CO and CO2 using electrochemical impedance spectroscopy", International Journal of Hydrogen Energy, Vol. 36, 2011, pp. 9815-9830. https://doi.org/10.1016/j.ijhydene.2011.04.076
  12. C. Y. Chen, W. H. Lai : "Effects of temperature and humidity on the cell performance and resistance of a phosphoric acid doped polybenzimidazole fuel cell", Journal of Power Sources, 195 (2010) pp. 7152-7159. https://doi.org/10.1016/j.jpowsour.2010.05.057
  13. J. Zhang, Y. Tang, C. Song, J. Zhang : "Polybenzimidazole-membrane-based PEM fuel cell in the temperature range of $120-200^{\circ}C$", Journal of Power Sources, Vol. 172, 2007, pp. 163-171. https://doi.org/10.1016/j.jpowsour.2007.07.047
  14. J. L. Jespersen, E. Schaltz, S. K. Kaer : "Electrochemical characterization of a polybenzimidazolebased high temperature proton exchange membrane unit cell Journal of Power Sources", Vol. 191, 2009, pp. 289-296. https://doi.org/10.1016/j.jpowsour.2009.02.025
  15. S. K. Das, A. Reis, K. J. Berry : "Experimental evaluation of CO poisoning on the performance of a high temperature proton exchange membrane fuel cell", Journal of Power Sources, Vol. 193, 2009, pp. 691-698. https://doi.org/10.1016/j.jpowsour.2009.04.021
  16. P. Krishnan, J. S. Park, C. S. Kim : "Performance of a poly(2,5-benzimidazole) membrane based high temperature PEM fuel cell in the presence of carbon monoxide", Journal of Power Sources, Vol. 159, 2006, pp. 817-823. https://doi.org/10.1016/j.jpowsour.2005.11.071
  17. T. Sousa, M. Mamlouk, K. Scott : "A dynamic non-isothermal model of a laboratory intermediate temperature fuel cell using PBI doped phosphoric acid membranes", International Journal of Hydrogen Energy, Vol. 35, 2010, pp. 12065-12080. https://doi.org/10.1016/j.ijhydene.2010.08.057
  18. Y. Oono, A. Sounai, M. Hori : "Long-term cell degradation mechanism in high-temperature proton exchange membrane fuel cells", Journal of Power Sources, Vol. 210, 2012, pp. 366-373. https://doi.org/10.1016/j.jpowsour.2012.02.098